
		      eMoviX v0.8.0rc2 <http://movix.sf.net/>
		  Author: Roberto De Leo <peggish@users.sf.net>
			Last update : June 21 2003 - Roberto

  What is it?
  -----------

  eMoviX is a tiny Linux CD distribution containing all the software to boot
  from a CD and play automatically every video file localized in the CD root.
  Supported formats are all formats supported by MPlayer, most noticeably
  DivX & XviD but more in general most AVI, MPEG, QuickTime, WMV, ASF, FLI and 
  a few others.
  If you put a subtitles file in the same position with the same name (e.g.
  movie.avi and movie.sub) then the subtitles will be automatically displayed.

  In other words, if you put your video file(s) and eMoviX in the same CD then
  you will have inside the CD not only the movie but also all the software
  needed to boot the PC and play the movie, so that you'll be able to play
  the movie in every PC even when no OS (or the wrong one :-) is installed
  (at least as long as that PC hardware is supported by Linux).

  Of course you will still able to read the CD and play the movie from any
  other OS, so the only thing you are going to lose are the ~8Mb that the
  eMoviX is going to occupy on the CD.

  How is it done?
  ---------------

  eMoviX is all made from software already available on the net:

  syslinux v2.00       <syslinux.zytor.com>   to make the CD bootable;
  mplayer v0.90        <www.mplayerhq.hu>     to play the movies;
  alsa 0.9.1           <www.alsa-project.org> as audio cards drivers;
  slackware v8.0       <www.slackware.com>    to make a mini distro;
  linux kernel v2.4.20 <www.kernel.org>       to make everything work :-)

  All I did is just put these pieces of software together :-)

  From the Slackware CD, that uses SysLinux to boot, I extracted
  the ramdisk that I slightly modified getting rid of a lot of
  unneeded files and adding all possible audio modules for kernel
  v2.4.20 and of course the MPlayer package.
  A perl script (/usr/local/bin/movix.pl) is executed immediately
  after the boot to check all possible audio modules and after that
  the videos playback is started.

  Documentation
  -------------

  Up to now I did not have much time to write any doc about all this, so this
  file contains almost all the documentation available. Hopefull will find
  time in the future. A little info/docs are available at the boot prompt on
  every CD produced with eMoviX.

  Requirements
  ------------

  --> Software:

  The only thing you need to use eMoviX is a software package to
  produce the bootable isoimage and one to burn the image on CD.

  On both Linux and M$ Window$ you can use mkisofs & cdrecord,
  that you can get from

	ftp://ftp.berlios.de/pub/cdrecord/

  Working copies of mkisofs.exe and cdrecord.exe for WinXX users are 
  included in the file MoviX_Win32_Script.zip packaged by Christophe 
  Paris and available for download in the usual MoviX download page

	http://sourceforge.net/project/showfiles.php?group_id=61561.

  The file contain also useful .bat files written by Christophe that
  should make a lot easier using mkisofs and cdrecord to M$ users.
  Many thanks to Christophe for making available these files!

  IMPORTANT NOTICE FOR WINDOWS USERS
  There are two new packages that allow window$ users to create eMoviX
  images through a user-friendly GUI:

  - eMoviX-0.8.0rc1_Setup.exe  by Clovis Sena (csena2k2@users.sf.net)
    This package is downloadable from the usual movix download page.

  - MovixISOCreator033-setup.exe by Kangur (movixisocreator@o2.pl)
    This package is downloadable from http://www.movixisocreator.prv.pl/

  --> Hardware:

  CPU
  Only x86 compatible are supported, and only >= i586.

  RAM
  According to my tests all eMoviX features work with 36MB of RAM.
  Some feature [e.g. mpeg playback] works even with just 32MB but mileage
  can vary according to your HW and the type of file contained in the CD.

  MICE
  You need no mouse with eMoviX.

  CONTROLLERS
  All IDE and SCSI controllers supported by kernel 2.4.20 are supported.
  Please write me an email if your controller seems not to work with eMoviX.

  VIDEO CARDS
  It is not easy to say on which video cards eMoviX will work.
  Cards brand that are generally known to work are:

    Matrox
    Ati
    NVidia
    Intel
    3Dfx
    Sis
    S3
    Trident

  but it is likely that the majority of video cards will work fine.
  I plan to publish soon on the movix web site a more detailed video cards database,
  so if your video card is not on my list and works with eMoviX please let
  me know and I will add it to the list of cards known to work.
  Same if it does not!

  BTW, if you use the "aa" label than eMoviX will work no matter which card
  do you have. Ok, it is ASCII visualization but, what the hell, it works! :-)

  VIDEO CARDS WITH TV-OUT
  eMoviX has support for using the TV-out feature of at least some Matrox, ATI,
  S3 Savage, NVidia and SiS video cards.
  
  - ATI: they activate their tv-out automatically if the output is connected
  to the TV when you boot the PC.

  - Matrox G400: use the TV boot label.

  - Matrox G450 and G550: use the TV boot label. The video will appear on the TV, 
  it needs to be connected to the secondary output of the video card.

  - NVidia: use the TV boot label.

  - S3 Savage: use the TV boot label. The computer's screen will be blank, all output 
  goes to the TV. After the movie ends, you can get back to the computer screen by 
  entering "s3switch lcd" or "s3switch crt".

  - SiS: this card has been tested only on laptops. Boot with any label and activate
  the TV-out from your keyboard.

  AUDIO CARDS
  eMoviX makes use of the ALSA sound drivers.
  A complete list of all supported cards with detailed info on each of them
  is available form the ALSA home page at 
	http://www.alsa-project.org/

  ETHERNET CARDS
  Net is not supported by eMoviX.

  REMOTES
  eMoviX fully supports the Hauppauge TV remotes.
  Starting from v0.8.0rc2 it adds support also for SONY remotes and Pinnacle
  serial remotes.
  If you are interested in supporting more remotes post a message in the movix forums.

  Supported Audio/Video formats
  -----------------------------

  I am not at all an expert in this so I cannot be very precise about this.
  All I know is that you should be able to play most of the DivX/XviD files around
  and more in general most AVI, MPG file, QuickTime, ASF and WMV should be ok.
  About video files, all MP3 and OGG/VORBIS files should play fine.

  If you have examples of such files not working with eMoviX please
  let me know.

  Installation
  ------------

  Starting from (pre-)release 0.6pre2 the installation of the package
  happens through the autoconf mechanism, so installing eMoviX is as easy
  as untarring the tarball, cd-ing in the newly created directory and
  writing the standard commands
     ./configure
     make
     make install
  By default the binaries "mkmovixiso", "movix-conf" and "movix-version"
  will be installed in
     /usr/local/bin
  and all eMoviX data files will be copied in
     /usr/local/share/emovix

  If all this does not make any sense to you or if you rather prefer making
  the iso image by hand, just forget what you've just read and read below.

  Linux GUIs for eMoviX
  ---------------------

  If you are not a CLI lover, there are two GUIs for you:

  * MoviXMaker

  MoviXMaker (http://savannah.nongnu.org/projects/movixmaker/) is a simple 
  Perl GTK+/Gnome/GladeXML interface created by Pascal Giard 
  <evilynux@users.sf.net> that helps you make, very easily, customized 
  eMoviX/MoviX/MoviX2 disc images.
  
  * K3b
 
  K3b (http://www.k3b.org/) is a very nice KDE GUI for burning CDs with Drag'n'Drop 
  capabilities and much more. Thanks to many users requests, its mantainer Sebastian 
  Trueg decided to support the eMoviX format!
  This means that if you install K3b you'll be able to produce eMoviX CDs simply
  choosing to open a new "eMoviX Project" :-)

  You can safely ignore next 3 sections unless you are a 'die-hard' CLI lover 
  like me ;-)

  Making a bootable iso image with your audio/video files
  -------------------------------------------------------

  DISCLAIMER FOR WINDOWS USERS: as already pointed out above, there are two 
  win32 GUIs for producing eMoviX ISO images, namely:

  - eMoviX-0.8.0rc1_Setup.exe  by Clovis Sena (csena2k2@users.sf.net)
    This package is downloadable from the usual movix download page.

  - MovixISOCreator033-setup.exe by Kangur (movixisocreator@o2.pl)
    This package is downloadable from http://www.movixisocreator.prv.pl/

  If you like the command line, you can use the Christophe Paris package
  MoviX_Win32_Script.zip, available for download in the usual MoviX download 
  page, and follow the "Old style" instructions below, or install cygwin
  (http://cygwin.redhat.com/) and follow the "New style" instructions.

  *** New style [not good for winXX users unless you have installed cygwin]

  To make as easy as possible the creation of the bootable iso image,
  the perl script "mkmovixiso" is provided together with the package.
  The typical thing you have to type to produce an iso image containing the
  files "file1" and "file2" and all files in the directory "dir" is something
  like

     mkmovixiso -t "My title" -o /tmp/movix.iso file1 file2 dir

  Keep in mind that you may want to add also some playlist to the CD, in case
  you have more than one file and you want them played in some particular order.
  For more info read carefully the "Playlists" section below.

  To know more about mkmovixiso options try "mkmovixiso -h".

  If you use always the same output file or same language or like to add
  always the same extra options, you can avoid writing them explicitly
  every time you run mkmovixiso creating a .mkmovixisorc file in your home dir.
  Here is an example 
  [WARNING: these are more or less random setting, use your own ones!!!]:

# <--------- .mkmovixisorc sample

# my .mkmovixisorc file
# all lines starting by # are comments!

# default output file location
output-file=/tmp/movix.iso

# default boot label
boot-label=MoviX

# default font set
subtitleFonts=polish

# extra options for mkisofs
extra-mkisofs-options=-J

### Options to be passed to MPlayer

# extra options for mplayer
extra-mplayer-options=-double -aspect 4:3 

# options you want to be sure won't be used by mplayer
unwanted-mplayer-options=-fs -zoom

# repeat the playback 5 times [0 = repeat for ever]
loop=5

# do not enforce DMA usage
#[use it only if your system hangs during the boot]
dma=n

# play all files in random order
random=y

# reboot after playback is over
reboot=y

# turn off the PC after playback is over
# shut=y

# eject after playback is over
eject=y

# delete temporary directory
auto-delete=y

# ---------> end of .mkmovixisorc sample
  No other options are available till now for the .movixrc

  *** Old style [for winXX users willing to use mkisofs without installing cygwin]

  If you like better the good old way do something similar to this:

  0. make somewhere, e.g. inside the "utils" folder",  a new directory,
     say you call it "movix";
  1. copy the folders src/isolinux and src/movix in the newly created
     "movix" folder [just to avoid misunderstandings, the new "movix" folder
     and src/movix are _not_ the same folder and the second won't appear anymore
     in this section...];
  2. if you have subtitles and wanna see them, create a folder called "mplayer"
     inside "movix", create a folder "font" inside "mplayer" and copy inside
     it your favorite character set from mplayer-fonts [inside "font" there
     should be at this point a few files with extension .raw an a single file
     called font.desc];
  3. copy all the audio/video files you want in the "movix" folder;
  4. run "sh mkmovixiso.sh" if you are on unix and "mkmvxiso.bat" if you are
     on winXX; your bootable iso image will be created in "\tmp\movix.iso"
     and "c:\temp\movix.iso" respectively.
     Remember to edit the _-V "Film"_ string inside the script if you want to
     give a better title to your CD!

  Please let me know if you find any mistake in this algorithm :-)

  *** Don't wanna use mkisofs!

  Window$ users hating mkisofs can still produce bootable eMoviX
  CDs with the following method introduced to me by the very
  inventive Hakan Atac:

  0. download the eMoviX bootable floppy image;
  1. start Nero :-)
  2. close the wizard (it has no bootable option);
  3. select CD-ROM (boot) from left selection area,
     it takes you to the boot section;
  4. select as disk image the floppy image you downloaded
     in step 0;
  5. in expert settings, set "Kind of Emulation" to "No emulation";
  6. put the "isolinux" directory in the CD root.
     IMPORTANT: if you want to use subtitles you must create in the CD root
     also a "mplayer/font" dir (font is a subdir of mplayer) and put your
     favorite fontset inside it. For example, for turkish fonts you must
     put inside the "mplayer/font" folder all files you find in the
     "mplayer-fonts/turkish/" folder of the eMoviX package;
  7. put all your audio/video files in the CD root [don't put them in any
     subdirectory!];
  8. if you want eMoviX to play your files in any particular order, put one
     or more playlists in the "movix" folder. By default eMoviX will play
     the one named "movix" (if any).
  9. burn the CD!

  Thanks a lot to Hakan Atac for providing this nice way to build bootable
  CDs with Nero!

  MultiSession
  ------------

  To learn how to add sessions to an eMoviX CD you can read the docs on
  http://advancemame.sourceforge.net/doc-advcd.html
  in sections 5-7.
  WARNING: making an eMoviX multisession CD with Nero is tricky because
  Nero is not aware of the Rock-Ridge CD format, so please *read* the
  sections above.
  NOTE: a user suggested using Winimage to add files to a bootable ISO file
  under WinXX. I had no time to test this, so if you try it please let
  me know if it works!

  Usage
  -----

  Once you have your iso image you can burn it over a CD with something
  like

     cdrecord dev=0,0 -v -eject /tmp/movix.iso

  or just use Nero or any package able to burn iso images on CDs.

  Leave the newly created CD in the CD-ROM drive and reboot your PC: if
  everything went fine your PC will boot from the CD and after a few seconds
  the mplayer copy contained in eMoviX will start playing all of your files.

  Boot Labels
  -----------

  There are a lot of video cards out there and a lot of mplayer video drivers
  and not necessarily all of their combinations work well together.

  The movix.pl script tries to determine automatically the best options for you,
  so that you don't need in general to enter anything at the boot prompt.

  But in case you are not satisfied with the playback video quality there
  are a few extra boot labels you can try to force eMoviX to use a particular
  driver:

     Label       Comment

     MoviX    -  The default label causes the movix script to choose
   (default)     automagically the best mplayer driver for your card.

      sdl     -  Very good subtitles rendering but not the best video quality.

     vesa     -  The "vesa" driver should work for most cards.

     vesaFB   -  Use the generic vesa FrameBuffer driver (800x600).

    vesaFB640, vesaFB800, vesaFB1024, vesaFB1280, vesaFB1400
              -  vesaFB labels for the following resolutions:
                 640x480 800x600 1024x768 1280x1024 1400x1050

      FB      -  Use the specific FB driver for yr card (if any).

      aa      -  Watch your videos in ASCII format! :-)

     aa1024   -  Watch your videos in ASCII format at a 1024x768 resolution.
     aa1280   -  Watch your videos in ASCII format at a 1280x1024 resolution.
                 (these last two requires a CPU >= 1GHz)

      TV      -  Initialize the applications [if any] needed to activate
                 the TV-out of your card.

  There are also two extra labels that can be useful too when you
  forget an eMoviX CD in your drive:

	hd	- forget the CD and boot from the HD
	floppy	- forget the CD and boot from the Floppy

  Thanks a lot to Christophe Paris for this nice suggestion,
  I use it many times a day!

  Boot Arguments
  --------------

  You can also provide at boot time a few options that will be automagically
  passed to the movix.pl script to modify its behaviour:

            Boot Args  Values     Effect

              SLOW       y,n      By default movix slows down your CD-ROM drives
                                  to decrease their noise, but sometimes this messes
                                  them up. If your CD drive seems to behave in some
                                  strange way try using this option.

              ACCEL      sw,no    Force software or no rescaling. If your playback
                                  appears to be very slow you can try "ACCEL=no"
                                  to make it smoother [but your movie won't be rescaled
				  to fullscreen!].

              VO_DRIVER  <driver> Force vo driver (read mplayer DOCS first!).

              MP_OPTIONS <opts>   Add mplayer options (same as above!).

              LIST       <list>   Use "list" as default playlist.

              DMA        y,n      Use "DMA=n" if your system hangs at boot time
				  trying to access your CD drive.

              SHUT       y,n      Power off PC after playing all CD files.
				  This is especially useful if you are likely to
				  fall asleep before the end of the playback :-)

              REBOOT     y,n      Reboot PC after playing all CD files.

              LOOP       <N>      Loops playback n times. Setting "LOOP=0"
				  let mplayer playing your files for ever.

              RANDOM     y,n      Play all the CD files in random order.

              REGION     <region> Either one of NTSC, NTSC-J, PAL, PAL-B,
                                  PAL-M, PAL-NC, PAL-60, PAL-M60 or SECAM.
                                  For your TV-Out to work properly,
                                  your video card needs to know what mode uses
                                  your TV (ATI cards don't need this).

              AUDIO     <N>       Audio card selection (if you have more than one)
                                  0 for the "first" card, 1 for the "second" etc.
                                  The order in which the audio cards are detected
                                  by eMoviX is somewhat arbitrary, so you might 
                                  need to try 0 and 1. 

	      SCSI     <module>   Force eMoviX to load the SCSI module.o module
				  (e.g. "SCSI=tmscsim")

  Example: if you like the standard boot label but you want to play your
  "sleepy.asx" playlist and you want your PC to shut down after the playlist's
  end (probably because you shut down way before that) and you don't want to
  slow down your CD-ROM because you like that buzzing background, then you
  should use the folowing boot string:

    boot: MoviX LIST=sleepy.asx SLOW=n SHUT=y

  How to play QuickTime/ASF/WMV/RP files
  --------------------------------------

  To play these kinds of files files MPlayer needs a few special DLL. 
  They are not included in the eMoviX package to keep it slim, so you have to
  download them by yourself at the following addresses:

      - Win32 codecs (asf,wmv)
        http://www1.mplayerhq.hu/MPlayer/releases/codecs/win32codecs.tar.bz2
      - QuickTime6 DLLs
        http://www1.mplayerhq.hu/MPlayer/releases/codecs/qt6dlls.tar.bz2
      - RealPlayer9 codecs
        http://www1.mplayerhq.hu/MPlayer/releases/codecs/rp9codecs.tar.bz2
      - RealPlayer Win32 codecs
        http://www1.mplayerhq.hu/MPlayer/releases/codecs/rp9win32codecs.tar.bz2
      - XAnim DLLs
        http://www1.mplayerhq.hu/MPlayer/releases/codecs/xanimdlls.tar.bz2

  To make eMoviX able to play these kind of files follow the following instructions:

  1. download the DLL files you need

  2. create a directory "codecs" inside the $prefix/share/emovix/ directory
     (by default $prefix is /usr/local/)

  3. put the bz2 archives inside the newly created "codecs" dir; do *not* unpack the
     tarball, eMoviX itself will take care of it

  4. every time you put, say, QuickTime files in an eMoviX CD, add the "--hasQT" option to
     the mkmovixiso line you normally use.
     Find out about all "--hasXX" options with "mkmovixiso -h"

  WARNING ABOUT QUICKTIME FILES: for a MPlayer bug, mplayer will crash when trying to play
  its second QuickTime file, so till this bug will be fixed it does not make much sense 
  adding more than one QuickTime file to an eMoviX CD.

  Mplayer Menu
  ------------

  You can easily use the new MPlayer "menu" feature to "navigate" through
  your videos selection and/or to change playlist!
  Just wait for mplayer to start and press the key "m" to activate the menu.

  The list of the other active keys for the mplayer is available on the
  mplayer site.
  The list of the most important keys is also available on every eMoviX CD
  when the splash-page logo appears.

  How to play other eMoviX CDs after the playback is over without rebooting
  -------------------------------------------------------------------------

  After eMoviX finished playing the CD content you can play any
  other eMoviX CD just putting the new CD inside and running the command
  "movix" at the prompt.

  Playing DVDs, VCDs and non-eMoviX CDs
  -------------------------------------

  If you want to do this then you are looking for MoviX, not eMoviX!
  Still, thanks to Balazs Barany, eMoviX now features a limited support
  to play CD/DVD/VCD/AudioCD/MP3CD media: after watching your eMoviX CD you can
  put any CD/DVD/VCD/AudioCD/MP3CD in one of your CD/DVD drives and use one of
  to following commands to play it:

	movix   (to play a CD with audio/video files inside)
	dvd N   (where N is usually 1 or 2)
	dvd     (automatically plays the longest DVD track)
	vcd N   (where N is usually 1 or 2)
	acd
	mcd

  *** IMPORTANT DVD NEWS ***
  Because of the DeCSS legal problems, this eMoviX version cannot read encrypted 
  DVDs unless *you* add *by your own* the libdvdcss.so library to the distro.

  The libdvdcss library makes use of the DeCSS algorithm, that has been
  declared *illegal* in some country (e.g. USA and Germany), so before adding it
  I suggest you to make sure it is ok to use it in your country. 

  Because of the extremely unclear status of the legal matters about DeCSS I can't
  even provide a link for those who legitimally can make use of it. 
  Nevertheless all you should do is going in your favorite search engine, look for 
  the package named libdvdcss-1.2.6-1.i386.rpm and copy that package in your
  $prefix/share/emovix/movix directory (or in src/movix if you are building eMoviX CDs 
  without using the mkmovixiso script).

  Once the library is in you eMovX installation, remember to add "-css" to the 
  mkmovixiso options for all eMoviX CDs that you want to make able to read 
  encrypted DVDs.
  **********************

  To get a much more powerful interface to MPlayer go back at the MoviX
  web site and download the last MoviX or MoviX2 version!

  What to do if audio is too low or absent
  ----------------------------------------

  If the audio is too low or absent even after maximizing it from mplayer 
  then you can try the following:
  stop the movie, change console with ALT-F2, change the volume
  with alsamixer, go back to the original console with ALT-F1 and
  start back the playback with the "movix" command.
  Note: you *cannot* do this while the movie is playing!

  Playlists
  ---------

  Since version 0.6 eMoviX supports playlists!
  The supported formats are: .asx .m3u .pls .txt .list

  E.g. if you have a file "My Video.avi" and "My Audio.mp3" you
  may write the following lists:

  1. movix.asx

  that will look like:

  <asx version = "3.0">
   <title>My List</title>
   <entry>
     <ref href = "/cdrom/My Video.avi"/>
   </entry>
   <entry>
     <ref href = "/cdrom/My Audio.mp3"/>
   </entry>
  </asx>
  
  2. movix.list or movix.txt

  that will look like:

  /cdrom/My Video.avi
  /cdrom/My Audio.mp3

  Don't know much about pls or m3u formats but I know that they work,
  at least in some case :-)

  eMoviX by default looks in the CD root for "movix.asx" or "movix.list"
  or similar.
  If none of them is available, then files should be played in alphabetic
  order. 
  If you like to have more than a playlist you can use other names and activate
  the other ones booting the CD with the LIST parameter.
  E.g if you have two playlists named "movix.list" and "alt.list" and want to
  use the second, then boot the CD in the following way:

     boot: MoviX LIST=alt.list

  NOTE: keep in mind that the new mplayer "menu" feature allows you to open
  a new playlist (or even to move from file) without having to reboot!

  Internationalization
  --------------------

  eMoviX contains translations in several languages for the boot-messages.
  To get a complete list use "mkmovixiso -h".
  To use boot messages in a language different from english use the
  "-lang <lang>" option of mkmovixiso [get details with "mkmovixiso -h"].

  International keyboard support
  ------------------------------

  On many non-English keyboards like German and Hungarian the characters needed
  by eMoviX are hard to type and not where you would expect them. (IBM
  compatible PCs and eMoviX use the US English keyboard layout by default.)

  You can use the --keyboard=<language> switch to change the keyboard layout
  both for the boot command line and for the Linux shell.

  Example: "mkmovixiso --keyboard=de" will create an eMoviX CD that uses the
  German keyboard layout.

  Supported font sets
  -------------------

  The eMoviX package contains the following mplayer fonts: 
    centralEU-cp1250, centralEU-iso-8859-2, czech, cyrillic, greek, hebrew, polish, 
    russian and turkish.
  All these packages support latin characters (iso-8859-1) plus their specific characters.

  Starting from 0.8.0rc2 eMoviX also supports TrueType fonts, and the following fonts 
  are included in the package: 
    FreeFonts, VeraFonts

  Don't even ask about adding the standard Microsoft TrueType fonts such as Arial, 
  Courier and so on: they are free of charge but they are not under any kind of 
  "Open Source" license  :-(
  Nevertheless, you can add them very easily to your own eMoviX installation just copying
  the ttf files from your c:\windows\fonts\ directory (if any ;-) to your
  $prefix/share/emovix/mplayer-fonts/ directory or getting the fonts directly from the
    http://sourceforge.net/projects/corefonts/
  page.
  Of course all this under your own responsibility ;-)
  Thanks a lot to Balazs Barany for pointing out this little copyright problem to me! :-)

  By default the FreeSerifBoldItalic font is added to the iso image.
  To have no fonts included add the -noSub option to the "mkmovixiso" command.
  See "mkmovixiso -h" to see how to choose a different font set.

  In general you'll write something like

     mkmovixiso -a filename -t "My title" -sub=greek -o /tmp/movix.iso

  All mplayer fonts packages were extracted from 

	ftp://ftp.mplayerhq.hu/MPlayer/contrib/fonts/

  except for the polish fonts (sent me by Krzysztof Kajkowski) and hebrew 
  fonts (sent me by Pavel Bibergal).

  Here is where the included True Type fonts come from:

     FreeFonts  -  http://www.nongnu.org/freefont/
     VeraFonts	-  http://gnome.org/fonts/

  For space reasons I did not include them all. If you want more choice, go get them
  and add all you want!

  Chinese Fonts: I wanted to add chinese fonts but the size of a single TrueType
  font file for chinese characters is 50% of the whole eMoviX package, so I gave
  up  :-)
  If you want to add chinese characters support, you can either follow the 
  instructions at 

	http://sourceforge.net/forum/forum.php?thread_id=878378&forum_id=207427

  or download the true type chinese fonts at

	http://www.arphic.com.tw/free/free.htm

  Debugging
  ---------

  For debugging purposes, after a nice suggestion by Jose' M. Fandinho,
  I added to eMoviX a script that will put on a floppy the following info:
    1. output of dmesg
    2. /proc/pci
    3. movix script logs
    4. settings of all cd-rom on the machine

  To run the script just put an empty floppy in the floppy drive, write
  "debug" and press ENTER.

  To retrieve all the info from the floppy from your Linux installation
  give the following command:
    sed -n "1,/MOVIX_MARK/p" /dev/fd0 > bugreport.txt

  Thanks a lot to Jose' for this nice trick!

  Kernel & MPlayer configuration
  -----------------------------

  You will find the config files for the current eMoviX mplayer and vmlinuz
  in the "config" dir of this package.

  Acknowledgments
  ---------------

  I want to thank the great guys at www.scriptamanent.it for making the
  logo for the eMoviX project.
  I also want to thanks my friend Andrea Assorgia for all his encouragements
  and good advices about making eMoviX and for actually having suggested
  the name of the project. Special thanks go to my brother Vincenzo that
  bought me a very fast CD burner speeding up a lot the development of this
  package! :-)
