dnl dnl Configuration input file for Squid dnl dnl $Id: configure.in,v 1.430.2.25 2010/03/14 21:40:46 hno Exp $ dnl dnl dnl AC_INIT(Squid Web Proxy, 2.7.STABLE9-20110824, http://bugs.squid-cache.org/, squid) AC_PREREQ(2.52) AM_CONFIG_HEADER(include/autoconf.h) AC_CONFIG_AUX_DIR(cfgaux) AM_INIT_AUTOMAKE AC_REVISION($Revision: 1.430.2.25 $)dnl AC_PREFIX_DEFAULT(/usr/local/squid) AM_MAINTAINER_MODE PRESET_CFLAGS="$CFLAGS" PRESET_LDFLAGS="$LDFLAGS" dnl Set default LDFLAGS if test -z "$LDFLAGS"; then LDFLAGS="-g" fi dnl Check for GNU cc AC_PROG_CC AM_PROG_CC_C_O AC_CANONICAL_HOST CRYPTLIB='' REGEXLIB='' # -lregex LIBREGEX='' # libregex.a dnl Check for pkg-config AC_PATH_PROG(PKGCONFIG, pkg-config, false) dnl find out the exe extension for this platform. If it's not empty, use it for CGI's as well. AC_EXEEXT AC_OBJEXT if test -z "$EXEEXT"; then CGIEXT=".cgi" else # automake automatically adds .exe when installing binaries CGIEXT="" fi AC_SUBST(CGIEXT) dnl this should be expanded to a list of platform sensible support requirements. dnl (adding an option like --enable-cygwin-support doesn't make sense :]) - R Collins 2001 case "$host_os" in mingw|mingw32|cygwin|cygwin32) AM_CONDITIONAL(ENABLE_WIN32SPECIFIC, true) ;; *) AM_CONDITIONAL(ENABLE_WIN32SPECIFIC, false) ;; esac case "$host_os" in mingw|mingw32) AM_CONDITIONAL(ENABLE_MINGW32SPECIFIC, true) AC_PATH_PROG(WIN32_PSAPI, psapi.dll, none) CFLAGS="$CFLAGS -mthreads" if test "$ac_cv_path_WIN32_PSAPI" = "none"; then echo "PSAPI.DLL is recommended to run Squid on Windows Platform" echo "Please see PSAPI.DLL section on doc/release-notes/release-2.6.html." else AC_DEFINE(HAVE_WIN32_PSAPI,1,[Define if you have PSAPI.DLL on Windows systems]) LIBS="$LIBS -lpsapi" fi ;; *) AM_CONDITIONAL(ENABLE_MINGW32SPECIFIC, false) ;; esac if test -z "$CACHE_HTTP_PORT"; then CACHE_HTTP_PORT="3128" fi if test -z "$CACHE_ICP_PORT"; then CACHE_ICP_PORT="3130" fi dnl Substitutions AC_DEFINE_UNQUOTED(CACHE_HTTP_PORT, $CACHE_HTTP_PORT, [What default TCP port to use for HTTP listening?]) AC_SUBST(CACHE_HTTP_PORT) AC_DEFINE_UNQUOTED(CACHE_ICP_PORT, $CACHE_ICP_PORT, [What default UDP port to use for ICP listening?]) AC_SUBST(CACHE_ICP_PORT) AC_DEFINE_UNQUOTED(CONFIG_HOST_TYPE, "$host", [Host type from configure]) AC_DEFINE_UNQUOTED(SQUID_CONFIGURE_OPTIONS, "$ac_configure_args", [configure command line used to configure Squid]) dnl Gerben Wierda case "$host" in mab-next-nextstep3) CC="$CC -arch m68k -arch i486 -arch hppa -arch sparc" ;; esac dnl Set Default CFLAGS if test -z "$PRESET_CFLAGS"; then if test "$GCC" = "yes"; then case "$host" in *-sun-sunos*) # sunos has too many warnings for this to be useful # motorola too ;; *m88k*-openbsd*) ;; *m88k*) # Motorola cc/ld does not like -02 but is ok on -O CFLAGS=`echo $CFLAGS | sed -e 's/-O[0-9]/-O/'` ;; *) CFLAGS="-Wall $CFLAGS" ;; esac else case "$host" in *mips-sgi-irix6.*) # suggested by Rafael Seidl CFLAGS="-O3 -OPT:Olimit=0:space=OFF \ -woff 1009,1014,1110,1116,1185,1188,1204,1230,1233 \ -Wl,-woff,85,-woff,84,-woff,134 \ -nostdinc -I/usr/include -D_BSD_SIGNALS $CFLAGS" ;; alpha-dec-osf4.*) # Mogul says DEC compilers take both -g and -O2 CFLAGS=`echo $CFLAGS | sed -e 's/-g/-g3/'` CFLAGS="-O2 $CFLAGS" ;; *) ;; esac fi fi dnl Set LDFLAGS if test -z "$PRESET_LDFLAGS"; then if test "$GCC" = "yes"; then case "$host" in *mips-sgi-irix6.*) # Silence Linker warnings 84, 85 and 134 LDFLAGS="-Wl,-woff,85 -Wl,-woff,84 -Wl,-woff,134 $LDFLAGS" ;; *) # nothing ;; esac else case "$host" in *) # nothing ;; esac fi fi dnl Enable optional modules AC_ARG_ENABLE(dlmalloc, [ --enable-dlmalloc[=LIB] Compile & use the malloc package by Doug Lea], [ case "$enableval" in 'yes') use_dlmalloc="yes" LIBDLMALLOC="libdlmalloc.a" LIB_MALLOC="-L../lib -ldlmalloc" echo "dlmalloc enabled" ;; 'no') use_dlmalloc="no" echo "dlmalloc disabled" ;; *) use_dlmalloc="yes" LIB_MALLOC="$enableval" echo "dlmalloc enabled with $LIB_MALLOC" esac ]) if test "${use_dlmalloc-unset}" = unset; then case "$host" in i386-*-solaris2.*) echo "Enabling dlmalloc for $host" use_dlmalloc="yes" LIBDLMALLOC="libdlmalloc.a" LIB_MALLOC="-L../lib -ldlmalloc" ;; *-sgi-irix*) echo "Enabling dlmalloc for $host" use_dlmalloc="yes" LIBDLMALLOC="libdlmalloc.a" LIB_MALLOC="-L../lib -ldlmalloc" ;; esac fi if test "x$ac_cv_enabled_dlmalloc" = "xyes"; then # Ok. dlmalloc was enabled before, but state may be changed. # we have to test these again unset ac_cv_func_mallinfo unset ac_cv_func_mallocblksize unset ac_cv_func_free unset ac_cv_func_realloc unset ac_cv_func_memalign unset ac_cv_func_valloc unset ac_cv_func_pvalloc unset ac_cv_func_calloc unset ac_cv_func_cfree unset ac_cv_func_malloc_trim unset ac_cv_func_malloc_usable_size unset ac_cv_func_malloc_stats unset ac_cv_func_mallinfo unset ac_cv_func_mallopt unset ac_cv_lib_gnumalloc unset ac_cv_header_gnumalloc_h unset ac_cv_lib_malloc unset ac_cv_enabled_dlmalloc fi if test "$use_dlmalloc" = yes; then ac_cv_func_mallinfo="yes" ac_cv_func_mallocblksize="no" ac_cv_func_free="yes" ac_cv_func_realloc="yes" ac_cv_func_memalign="yes" ac_cv_func_valloc="yes" ac_cv_func_pvalloc="yes" ac_cv_func_calloc="yes" ac_cv_func_cfree="yes" ac_cv_func_malloc_trim="yes" ac_cv_func_malloc_usable_size="yes" ac_cv_func_malloc_stats="yes" ac_cv_func_mallopt="yes" ac_cv_lib_gnumalloc="no" ac_cv_header_gnumalloc_h="no" ac_cv_lib_malloc="no" ac_cv_enabled_dlmalloc="yes" fi AC_SUBST(LIBDLMALLOC) AC_SUBST(LIB_MALLOC) AC_ARG_ENABLE(gnuregex, [ --enable-gnuregex Compile GNUregex. Unless you have reason to use this option, you should not enable it. This library file is usually only required on Windows and very old Unix boxes which do not have their own regex library built in.], [USE_GNUREGEX=$enableval]) dnl This is a developer only option.. developers know how to set defines dnl dnl AC_ARG_ENABLE(xmalloc-debug, dnl [ --enable-xmalloc-debug Do some simple malloc debugging], dnl [ if test "$enableval" = "yes" ; then dnl echo "Malloc debugging enabled" dnl AC_DEFINE(XMALLOC_DEBUG, 1, [Define to do simple malloc debugging]) dnl fi dnl ]) dnl This is a developer only option.. developers know how to set defines dnl dnl AC_ARG_ENABLE(xmalloc-debug-trace, dnl [ --enable-xmalloc-debug-trace dnl Detailed trace of memory allocations], dnl [ if test "$enableval" = "yes" ; then dnl echo "Malloc debug trace enabled" dnl AC_DEFINE(XMALLOC_TRACE, 1, [Define to have a detailed trace of memory allocations]) dnl AC_DEFINE(XMALLOC_DEBUG, 1, [Define to do simple malloc debugging]) dnl fi dnl ]) AC_ARG_WITH(valgrind-debug, [ --with-valgrind-debug Include debug instrumentation for use with valgrind], [ case $withval in yes) valgrind=1 ;; no) valgrind= ;; *) CPPFLAGS="$CPPFLAGS -I${enableval}/include" valgrind=1 ;; esac if test $valgrind; then AC_DEFINE(WITH_VALGRIND, 1, [Valgrind memory debugger support]) echo "Valgrind debug support enabled" fi ]) AC_ARG_ENABLE(mempool-debug, [ --enable-mempool-debug Include MemPool debug verifications]) if test "$enable_mempool_debug" = yes; then AC_DEFINE(DEBUG_MEMPOOL, 1, [MemPool debug verifications]) echo "Mempool debug checks enabled" fi AC_ARG_ENABLE(xmalloc-statistics, [ --enable-xmalloc-statistics Show malloc statistics in status page], [ if test "$enableval" = "yes" ; then echo "Malloc statistics enabled" AC_DEFINE(XMALLOC_STATISTICS, 1, [Define to have malloc statistics]) fi ]) USE_CARP=1 AC_ARG_ENABLE(carp, [ --disable-carp Disable CARP support], [ if test "$enableval" = "no" ; then echo "CARP disabled" USE_CARP=0 fi ]) if test $USE_CARP = 1; then AC_DEFINE(USE_CARP, 1, [Cache Array Routing Protocol]) fi AC_ARG_ENABLE(async-io, [ --enable-async-io[=N_THREADS] Shorthand for --with-aufs-threads=N_THREADS --with-pthreads --enable-storeio=ufs,aufs], [ case $enableval in yes) with_pthreads="yes" STORE_MODULES="ufs aufs" ;; no) ;; *) aufs_io_threads=$enableval with_pthreads="yes" STORE_MODULES="ufs aufs" ;; esac ]) AC_ARG_WITH(aufs-threads, [ --with-aufs-threads=N_THREADS Tune the number of worker threads for the aufs object store.], [ case $withval in [[0-9]]*) aufs_io_threads=$withval ;; *) echo "ERROR: Invalid --with-aufs-threads argument" exit 1 ;; esac ]) if test "$aufs_io_threads"; then echo "With $aufs_io_threads aufs threads" AC_DEFINE_UNQUOTED(AUFS_IO_THREADS, $aufs_io_threads, [Defines how many threads aufs uses for I/O]) fi AC_ARG_WITH(pthreads, [ --with-pthreads Use POSIX Threads]) if test "$with_pthreads" = "yes"; then echo "With pthreads" fi AC_ARG_WITH(aio, [ --with-aio Use POSIX AIO]) if test "$with_aio" = "yes"; then echo "With aio" fi AC_ARG_WITH(dl, [ --with-dl Use dynamic linking]) if test "$with_dl" = "yes"; then echo "With dl" fi AC_ARG_ENABLE(storeio, [ --enable-storeio="list of modules" Build support for the list of store I/O modules. The default is only to build the "ufs" module. See src/fs for a list of available modules, or Programmers Guide section for details on how to build your custom store module], [ case $enableval in yes) for module in $srcdir/src/fs/*; do name="`basename $module`" case $name in CVS) # Ignore ;; *) if test -d $module; then STORE_MODULES="$STORE_MODULES $name" fi ;; esac done ;; no) ;; *) STORE_MODULES="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" ;; esac ], [ if test -z "$STORE_MODULES"; then STORE_MODULES="ufs" fi ]) echo "Store modules built: $STORE_MODULES" NEED_DISKD=0 USE_AIOPS_WIN32=0 NEED_COSSDUMP=0 STORE_OBJS="fs/lib`echo $STORE_MODULES|sed -e 's% %.a fs/lib%g'`.a" AC_SUBST(STORE_OBJS) STORE_LIBS="`echo $STORE_OBJS|sed -e 's%fs/%%g'`" AC_SUBST(STORE_LIBS) dnl some store implementations need additional stuff built like diskd_daemon STORE_MODULE_SUBDIRS= for fs in $STORE_MODULES none; do case "$fs" in diskd) NEED_DISKD=1 ;; aufs) if test -z "$with_pthreads"; then case "$host_os" in mingw|mingw32) USE_AIOPS_WIN32=1 echo "aufs store used, Windows threads support automatically enabled" ;; *) echo "aufs store used, pthreads support automatically enabled" with_pthreads=yes ;; esac fi ;; coss) NEED_COSSDUMP=1 if test -z "$with_aio"; then echo "coss store used, aio support automatically enabled" with_aio=yes fi ;; esac done AC_SUBST(STORE_MODULES) AM_CONDITIONAL([NEED_DISKD], [test "$NEED_DISKD" = 1]) AM_CONDITIONAL([USE_AIOPS_WIN32], [test "$USE_AIOPS_WIN32" = 1]) AM_CONDITIONAL([NEED_COSSDUMP], [test "$NEED_COSSDUMP" = 1]) dnl --enable-heap-replacement compatibility option AC_ARG_ENABLE(heap-replacement, [ --enable-heap-replacement Backwards compatibility option. Please use the new --enable-removal-policies directive instead.], [ if test "$enableval" = "yes" ; then echo "--enable-heap-replacement is obsolete. please use the new" echo "--enable-removal-policies directive instead" sleep 5 REPL_POLICIES="heap" fi ]) AC_ARG_ENABLE(removal-policies, [ --enable-removal-policies="list of policies" Build support for the list of removal policies. The default is only to build the "lru" module. See src/repl for a list of available modules, or Programmers Guide section 9.9 for details on how to build your custom policy], [ case $enableval in yes) for module in $srcdir/src/repl/*; do name="`basename $module`" case $name in CVS) # Ignore ;; *) if test -d $module; then REPL_POLICIES="$REPL_POLICIES $name" fi ;; esac done ;; no) ;; *) REPL_POLICIES="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" ;; esac ], [ if test -z "$REPL_POLICIES"; then REPL_POLICIES="lru" fi ]) echo "Removal policies built: $REPL_POLICIES" AC_SUBST(REPL_POLICIES) REPL_OBJS="repl/lib`echo $REPL_POLICIES|sed -e 's% %.a repl/lib%g'`.a" AC_SUBST(REPL_OBJS) REPL_LIBS="`echo $REPL_OBJS|sed -e 's%repl/%%g'`" AC_SUBST(REPL_LIBS) AM_CONDITIONAL(ENABLE_PINGER, false) AC_ARG_ENABLE(icmp, [ --enable-icmp Enable ICMP pinging], [ if test "$enableval" = "yes" ; then echo "ICMP enabled" AC_DEFINE(USE_ICMP, 1, [If you want to use Squid's ICMP features (highly recommended!) then define this. When USE_ICMP is defined, Squid will send ICMP pings to origin server sites. This information is used in numerous ways: - Sent in ICP replies so neighbor caches know how close you are to the source. - For finding the closest instance of a URN. - With the 'test_reachability' option. Squid will return ICP_OP_MISS_NOFETCH for sites which it cannot ping.]) AM_CONDITIONAL(ENABLE_PINGER, true) fi ]) AM_CONDITIONAL(USE_DELAY_POOLS, false) AC_ARG_ENABLE(delay-pools, [ --enable-delay-pools Enable delay pools to limit bandwidth usage], [ if test "$enableval" = "yes" ; then echo "Delay pools enabled" AC_DEFINE(DELAY_POOLS, 1, [Traffic management via "delay pools".]) AM_CONDITIONAL(USE_DELAY_POOLS, true) fi ]) dnl This is a developer only option. Developers know how to set defines dnl dnl AC_ARG_ENABLE(mem-gen-trace, dnl [ --enable-mem-gen-trace Do trace of memory stuff], dnl [ if test "$enableval" = "yes" ; then dnl echo "Memory trace (to file) enabled" dnl AC_DEFINE(MEM_GEN_TRACE, 1, [Define for log file trace of mem alloc/free]) dnl fi dnl ]) AC_ARG_ENABLE(useragent-log, [ --enable-useragent-log Enable logging of User-Agent header], [ if test "$enableval" = "yes" ; then echo "User-Agent logging enabled" AC_DEFINE(USE_USERAGENT_LOG, 1, [If you want to log User-Agent request header values, define this. By default, they are written to useragent.log in the Squid log directory.]) fi ]) AC_ARG_ENABLE(referer-log, [ --enable-referer-log Enable logging of Referer header], [ if test "$enableval" = "yes" ; then echo "Referer logging enabled" AC_DEFINE(USE_REFERER_LOG, 1, [If you want to log Referer request header values, define this. By default, they are written to referer.log in the Squid log directory.]) fi ]) USE_WCCP=1 AC_ARG_ENABLE(wccp, [ --disable-wccp Disable Web Cache Coordination V1 Protocol], [ if test "$enableval" = "no" ; then echo "Web Cache Coordination V1 Protocol disabled" USE_WCCP=0 fi ]) if test $USE_WCCP = 1; then AC_DEFINE(USE_WCCP, 1, [Define to enable WCCP]) fi USE_WCCPv2=1 AC_ARG_ENABLE(wccpv2, [ --disable-wccpv2 Disable Web Cache Coordination V2 Protocol], [ if test "$enableval" = "no" ; then echo "Web Cache Coordination V2 Protocol disabled" USE_WCCPv2=0 fi ]) if test $USE_WCCPv2 = 1; then AC_DEFINE(USE_WCCPv2, 1, [Define to enable WCCP V2]) fi AC_ARG_ENABLE(kill-parent-hack, [ --enable-kill-parent-hack Kill parent on shutdown], [ if test "$enableval" = "yes" ; then echo "Kill parent on shutdown" AC_DEFINE(KILL_PARENT_OPT, 1, [A dangerous feature which causes Squid to kill its parent process (presumably the RunCache script) upon receipt of SIGTERM or SIGINT. Use with caution.]) fi ]) AC_ARG_ENABLE(forward-log, [ --enable-forward-log Enable experimental forward_log directive], [ if test "$enableval" = "yes" ; then echo "forward_log enabled" AC_DEFINE(WIP_FWD_LOG, 1, [Define to enable experimental forward_log directive]) fi ]) AC_ARG_ENABLE(multicast-miss, [ --enable-multicast-miss Enable experimental multicast notification of cachemisses], [ if test "$enableval" = "yes" ; then echo "multicast of cache miss URLs enabled" AC_DEFINE(MULTICAST_MISS_STREAM, 1, [Define to enable experimental multicast of cache miss URLs]) fi ]) AM_CONDITIONAL(USE_SNMP, false) AC_ARG_ENABLE(snmp, [ --enable-snmp Enable SNMP monitoring], [ if test "$enableval" = "yes" ; then echo "SNMP monitoring enabled" AC_DEFINE(SQUID_SNMP, 1, [Define to enable SNMP monitoring of Squid]) SNMPLIB='../snmplib/libsnmp.a' AM_CONDITIONAL(USE_SNMP, true) SNMP_MAKEFILE=./snmplib/Makefile makesnmplib=snmplib fi ]) AC_SUBST(SNMPLIB) AC_SUBST(makesnmplib) AC_ARG_ENABLE(cachemgr-hostname, [ --enable-cachemgr-hostname[=hostname] Make cachemgr.cgi default to this host], [ case $enableval in yes) AC_DEFINE(CACHEMGR_HOSTNAME, [getfullhostname()], [If you are upset that the cachemgr.cgi form comes up with the hostname field blank, then define this to getfullhostname()]) echo "Cachemgr default hostname == host where cachemgr runs" ;; no) : # Nothing to do.. ;; *) AC_DEFINE_UNQUOTED(CACHEMGR_HOSTNAME, "${enableval}", [If you are upset that the cachemgr.cgi form comes up with the hostname field blank, then define this to getfullhostname()]) echo "Cachemgr default hostname set to ${enableval}" ;; esac ]) AC_ARG_ENABLE(arp-acl, [ --enable-arp-acl Enable use of ARP ACL lists (ether address)], [ if test "$enableval" = "yes" ; then echo "ARP ACL lists enabled (ether address)" case "$host" in *-linux-*) ;; *-solaris*) ;; *-freebsd*) ;; *-netbsd*) ;; *-openbsd*) ;; *-cygwin*) LIBS="$LIBS -liphlpapi" ;; *-mingw*) LIBS="$LIBS -liphlpapi" ;; *) echo "WARNING: ARP ACL support probably won't work on $host." sleep 10 ;; esac AC_DEFINE(USE_ARP_ACL, 1, [Define this to include code which lets you specify access control elements based on ethernet hardware addresses. This code uses functions found in 4.4 BSD derviations (e.g. FreeBSD, ?).]) fi ]) AM_CONDITIONAL(ENABLE_HTCP, false) AC_ARG_ENABLE(htcp, [ --enable-htcp Enable HTCP protocol], [ if test "$enableval" = "yes" ; then echo "HTCP enabled" AC_DEFINE(USE_HTCP, 1, [Define this to include code for the Hypertext Cache Protocol (HTCP)]) AM_CONDITIONAL(ENABLE_HTCP, true) fi ]) dnl SSL is not enabled by default. AM_CONDITIONAL(ENABLE_SSL, false) SSLLIB='' SSLFLAGS='' dnl Default is to use OpenSSL when available AC_ARG_ENABLE(ssl, [ --enable-ssl Enable ssl gatewaying support using OpenSSL], [ if test "$enableval" != "no"; then echo "SSL gatewaying using OpenSSL enabled" AC_DEFINE(USE_SSL, 1, [Define this to include code for SSL encryption.]) AM_CONDITIONAL(ENABLE_SSL, true) case "$host_os" in mingw|mingw32) SSLLIB='-lssleay32 -leay32 -lgdi32' ;; *) SSLLIB='-lssl -lcrypto' ;; esac USE_OPENSSL=1 fi ]) USE_SQUID_MD5=0 AC_ARG_WITH(system-md5, [ --without-system-md5 Disable the use of any system provided MD5 Implementation forcing fallback on the internal implementation shipped with Squid], [ case "$enableval" in no) AC_DEFINE(USE_SQUID_MD5, 1, [Define this to force use of the internal MD5 implementation]) ;; esac ]) dnl User may specify OpenSSL is needed from a non-standard location AC_ARG_WITH(openssl, [ --with-openssl[=prefix] Compile with the OpenSSL libraries. The path to the OpenSSL development libraries and headers installation can be specified if outside of the system standard directories], [ case "$with_openssl" in yes) USE_OPENSSL=1 ;; no) USE_OPENSSL= ;; *) PKG_CONFIG_PATH="$with_openssl/lib/pkgconfig${PKG_CONFIG_PATH:+:}${PKG_CONFIG_PATH}" export PKG_CONFIG_PATH SSLLIB="-L$with_openssl/lib -lssl -lcrypto" SSLFLAGS="-I$with_openssl/include" USE_OPENSSL=1 esac ]) if test -n "$USE_OPENSSL"; then echo "Using OpenSSL MD5 implementation" AC_DEFINE(USE_OPENSSL, 1, [Define this to make use of the OpenSSL libraries for MD5 calculation rather than Squid's own MD5 implementation or if building with SSL encryption (USE_SSL)]) if test -z "$SSLLIB"; then SSLLIB="-lcrypto" # for MD5 routines fi if $PKGCONFIG --exists openssl; then SSLLIB="`$PKGCONFIG --libs openssl`" SSLFLAGS="`$PKGCONFIG --cflags openssl`" fi CPPFLAGS="${SSLFLAGS} $CPPFLAGS" fi AC_SUBST(SSLLIB) AC_ARG_ENABLE(forw-via-db, [ --enable-forw-via-db Enable Forw/Via database], [ if test "$enableval" = "yes" ; then echo "FORW-VIA enabled" AC_DEFINE(FORW_VIA_DB, 1, [Enable Forw/Via database]) fi ]) AC_ARG_ENABLE(cache-digests, [ --enable-cache-digests Use Cache Digests see http://www.squid-cache.org/FAQ/FAQ-16.html], [ if test "$enableval" = "yes" ; then echo "USE_CACHE_DIGESTS enabled" AC_DEFINE(USE_CACHE_DIGESTS, 1, [Use Cache Digests for locating objects in neighbor caches. This code is still semi-experimental.]) fi ]) dnl Select Default Error language AC_ARG_ENABLE(default-err-language, [ --enable-default-err-language=lang Select default language for Error pages (see errors directory) ], [ if test -d $srcdir/errors/$enableval; then ERR_DEFAULT_LANGUAGE=$enableval else echo "ERROR! Unknown language $enableval, see errors/ directory" exit 1 fi ],[ERR_DEFAULT_LANGUAGE="English"]) AC_SUBST(ERR_DEFAULT_LANGUAGE) dnl Select languages to be installed AC_ARG_ENABLE(err-languages, [ --enable-err-languages=\"lang1 lang2..\" Select languages to be installed. (All will be installed by default) ], [ for l in $enableval; do if test -d $srcdir/errors/$l; then :; else echo "ERROR! Unknown language $$l, see errors/" exit 1 fi done ERR_LANGUAGES=$enableval ],[ ERR_LANGUAGES= for l in $srcdir/errors/*; do if test -f $l/ERR_ACCESS_DENIED; then ERR_LANGUAGES="$ERR_LANGUAGES `basename $l`" fi done ]) AC_SUBST(ERR_LANGUAGES) dnl Size of COSS memory buffer AC_ARG_WITH(coss-membuf-size, [ --with-coss-membuf-size COSS membuf size (default 1048576 bytes) ], [ if test "$with_coss_membuf_size"; then echo "Setting COSS membuf size to $with_coss_membuf_size bytes" AC_DEFINE_UNQUOTED(COSS_MEMBUF_SZ, $with_coss_membuf_size, [Define if you want to set the COSS membuf size]) fi ]) dnl COSS I/O method AC_ARG_ENABLE(coss-aio-ops, [ --enable-coss-aio-ops Enable COSS I/O with Posix AIO (default is aufs I/O) ]) if test "$enable_coss_aio_ops" = "yes"; then echo "Using Posix AIO method for COSS disk I/O" AC_DEFINE(USE_AUFSOPS, 0, [ Define this if you would like to use the aufs I/O method for disk I/O instead of the POSIX AIO method.]) else AC_DEFINE(USE_AUFSOPS, 1, [ Define this if you would like to use the aufs I/O method for disk I/O instead of the POSIX AIO method.]) fi dnl Enable select() AC_ARG_ENABLE(select, [ --enable-select Force the use of select support. Normally configure automatically selects a better alternative if available. --disable-select Disable select support, causing configure to fail if a better alternative is not available], [ case "$enableval" in yes) echo "Forcing select() to be enabled" SELECT_TYPE="select" ac_cv_func_select='yes' ;; no) echo "Forcing select() to be disabled" ac_cv_func_select='no' ;; esac ]) dnl Enable select() AC_ARG_ENABLE(select-simple, [ --enable-select-simple Force the use of select support (POSIX). Useful if your system only supports the bare minium POSIX select requirements without fds_bits.], [ case "$enableval" in yes) echo "Forcing select() to be enabled in simple POSIX mode" SELECT_TYPE="select_simple" ac_cv_func_select='yes' ;; no) echo "Forcing select() to be disabled" ac_cv_func_select='no' ;; esac ]) dnl Enable poll() AC_ARG_ENABLE(poll, [ --enable-poll Force the use of poll even if automatic checks indicate poll may be broken on your plaform. --disable-poll Disable the use of poll.], [ case "$enableval" in yes) echo "Forcing poll() to be enabled" SELECT_TYPE="poll" ac_cv_func_poll='yes' ;; no) echo "Forcing poll() to be disabled" ac_cv_func_poll='no' ;; esac ]) dnl Enable epoll() AC_ARG_ENABLE(epoll, [ --enable-epoll Force the use of epoll even if automatic checks indicate epoll may not be supported. --disable-epoll Disable the use of epoll.], [ case "$enableval" in yes) echo "Forcing epoll() to be enabled" SELECT_TYPE="epoll" force_epoll='yes' ;; no) echo "Forcing epoll() to be disabled" ac_cv_func_epoll_ctl='no' ;; esac ]) dnl Enable kqueue AC_ARG_ENABLE(kqueue, [ --enable-kqueue Force the use of kqueue even if automatic checks indicate kqueue may not be supported. --disable-kqueue Disable kqueue support. ], [ case "$enableval" in yes) echo "Forcing kqueue to be enabled" SELECT_TYPE="kqueue" ac_cv_func_kqueue='yes' ;; no) echo "Forcing kqueue to be disabled" ac_cv_func_kqueue='no' ;; esac ]) dnl Enable devpoll AC_ARG_ENABLE(devpoll, [ --enable-devpoll Use Solaris /dev/poll instead of poll], [ case "$enableval" in yes) echo "Forcing devpoll to be enabled" SELECT_TYPE="devpoll" ;; no) echo "Forcing devpoll to be disabled" ;; esac ]) dnl Disable HTTP violations HTTP_VIOLATIONS=1 AC_ARG_ENABLE(http-violations, [ --disable-http-violations This allows you to remove code which is known to violate the HTTP protocol specification.], [ if test "$enableval" = "no" ; then echo "Disabling HTTP Violations" HTTP_VIOLATIONS=0 fi ]) if test $HTTP_VIOLATIONS = 1; then AC_DEFINE(HTTP_VIOLATIONS, 1, [By default (for now anyway) Squid includes options which allows the cache administrator to violate the HTTP protocol specification in terms of cache behaviour. Setting this to '0' will disable such code.]) fi dnl Enable IP-Filter Transparent Proxy AC_ARG_ENABLE(ipf-transparent, [ --enable-ipf-transparent Enable Transparent Proxy support for systems using IP-Filter network address redirection.], [ if test "$enableval" = "yes" ; then echo "IP-Filter Transparent Proxy enabled" AC_DEFINE(IPF_TRANSPARENT, 1, [Enable support for Transparent Proxy on systems using IP-Filter address redirection. This provides "masquerading" support for non Linux system.]) IPF_TRANSPARENT="yes" dnl On Solaris Ipfilter includes expect that SOLARIS2 is defined with the dnl Solaris minor version (8, 9, 10, ...) case "$host" in *-solaris*) solrev=`uname -r | sh -c 'IFS=. read j n x; echo $n'` CFLAGS="-DSOLARIS2=$solrev $CFLAGS" ;; *) ;; esac fi ]) dnl Enable PF Transparent Proxy AC_ARG_ENABLE(pf-transparent, [ --enable-pf-transparent Enable Transparent Proxy support for systems using PF network address redirection.], [ if test "$enableval" = "yes" ; then echo "PF Transparent Proxy enabled" AC_DEFINE(PF_TRANSPARENT, 1, [Enable support for Transparent Proxy on systems using PF address redirection. This provides "masquerading" support for OpenBSD.]) PF_TRANSPARENT="yes" fi ]) dnl Enable Linux Netfilter Transparent Proxy AC_ARG_ENABLE(linux-netfilter, [ --enable-linux-netfilter Enable Transparent Proxy support for Linux 2.4 and later], [ if test "$enableval" = "yes" ; then echo "Linux-Netfilter Transparent Proxy enabled" AC_DEFINE(LINUX_NETFILTER, 1, [Enable support for Transparent Proxy on Linux 2.4 and later]) LINUX_NETFILTER="yes" fi ]) dnl Enable Large file support buildmodel="" needlargefiles= AC_ARG_WITH(large-files, [ --with-large-files Enable support for large files (logs etc).], [ if test "$withval" = yes; then needlargefiles=1 fi ]) AC_ARG_ENABLE(large-cache-files, [ --enable-large-cache-files Enable support for large cache files (>2GB). WARNING: on-disk cache format is changed by this option], [ if test "$enableval" = "yes" ; then echo "Large cache file support enabled" AC_DEFINE(LARGE_CACHE_FILES, 1, [Support large cache files > 2GB]) dnl needlargefiles=1 fi ]) dnl UNIX Build environment AC_ARG_WITH(build-environment, [ --with-build-environment=model The build environment to use. Normally one of POSIX_V6_ILP32_OFF32 32 bits POSIX_V6_ILP32_OFFBIG 32 bits with large file support POSIX_V6_LP64_OFF64 64 bits POSIX_V6_LPBIG_OFFBIG large pointers and files XBS5_ILP32_OFF32 32 bits (legacy) XBS5_ILP32_OFFBIG 32 bits with large file support (legacy) XBS5_LP64_OFF64 64 bits (legacy) XBS5_LPBIG_OFFBIG large pointers and files (legacy) default The default for your OS], [ case "$withval" in yes|no) echo "--with-build-environment expects a build environment string as used by getconf" exit 1 ;; *) buildmodel="$withval" ;; esac ]) if test $needlargefiles && test -z "$buildmodel"; then for model in POSIX_V6_LPBIG_OFFBIG XBS5_LPBIG_OFFBIG POSIX_V6_LP64_OFF64 XBS5_LP64_OFF64 POSIX_V6_ILP32_OFFBIG XBS5_ILP32_OFFBIG; do if test "`getconf _$model 2>/dev/null || true`" = 1 || test "`getconf $model 2>/dev/null || true`" ; then buildmodel=$model break fi done if test -z "$buildmodel"; then echo "WARNING: No suitable build environment found for large files. Trying to use _FILE_OFFSET_BITS=64" sleep 1 fi fi case "$buildmodel" in "default"|"") if test $needlargefiles; then echo "Enabling -D_FILE_OFFSET_BITS=64 for large file support" CFLAGS="-D_FILE_OFFSET_BITS=64 $CFLAGS" fi ;; *) echo "Using $buildmodel build environment" if test "`getconf _$buildmodel 2>/dev/null || true`" = 1 || test "`getconf $buildmodel 2>/dev/null || true`" ; then : # All fine else echo "ERROR: Build environment $buildmodel not known to getconf." exit 1 fi CFLAGS="`getconf ${buildmodel}_CFLAGS` $CFLAGS" LIBS="`getconf ${buildmodel}_LIBS` $LIBS" LDFLAGS="`getconf ${buildmodel}_LDFLAGS` $LDFLAGS" case "$host" in dnl dnl On Solaris getconf returns for CFLAGS -xarch=generic64, -Xa and -Usun options, and dnl for LDFLAGS -xarch=generic64, but: dnl "-Xa" is supported only by Sun cc, so we need to remove it when using gcc dnl For gcc "-xarch=generic64" must be replaced with "-m64" dnl The 'sun' define is needed by ipfilter includes, so we must remove "-Usun" *-solaris*) if test "$GCC" = "yes"; then echo "Removing -Xa for gcc on $host" CFLAGS="`echo $CFLAGS | sed -e 's/-Xa//'`" echo "Replacing -xarch=generic64 with -m64 for gcc on $host" CFLAGS="`echo $CFLAGS | sed -e 's/-xarch=generic64/-m64/'`" LDFLAGS="`echo $LDFLAGS | sed -e 's/-xarch=generic64//'`" fi echo "Removing -Usun on $host" CFLAGS="`echo $CFLAGS | sed -e 's/-Usun//'`" ;; dnl dnl On Irix 6.x getconf returns options valid only for the SGI MipsPRO compiler, dnl so we must adjust something to avoid gcc errors. dnl On Irix 6.x 32/64 bit we must replace "-n32" with "-mabi=n32" in CFLAGS and dnl remove "-n32" from LDFLAGS dnl On Irix 6.x 64 bit we must replace "-64" with "-mabi=64" in CFLAGS and remove dnl "-64" from LDFLAGS *-sgi-irix6.*) if test "$GCC" = "yes"; then CFLAGS="`echo $CFLAGS | sed -e 's/-n32/-mabi=n32/'`" LDFLAGS="`echo $LDFLAGS | sed -e 's/-n32//'`" CFLAGS="`echo $CFLAGS | sed -e 's/-64/-mabi=64/'`" LDFLAGS="`echo $LDFLAGS | sed -e 's/-64//'`" fi ;; *) ;; esac ;; esac dnl Enable Linux transparent proxy support AC_ARG_ENABLE(linux-tproxy, [ --enable-linux-tproxy Enable real Transparent Proxy support for Netfilter TPROXY.], [ if test "$enableval" = "yes" ; then echo "Linux Netfilter/TPROXY enabled" AC_DEFINE(LINUX_TPROXY, 1, [Enable real Transparent Proxy support for Netfilter TPROXY.]) LINUX_TPROXY="yes" if test -z "$LINUX_NETFILTER"; then echo "Linux-Netfilter Transparent Proxy automatically enabled" LINUX_NETFILTER="yes" fi fi ]) AM_CONDITIONAL(MAKE_LEAKFINDER, false) dnl Enable Leak Finding Functions AC_ARG_ENABLE(leakfinder, [ --enable-leakfinder Enable Leak Finding code. Enabling this alone does nothing; you also have to modify the source code to use the leak finding functions. Probably Useful for hackers only.], [ if test "$enableval" = "yes" ; then echo "Leak-Finding enabled" AC_DEFINE(USE_LEAKFINDER, 1, [Enable code for assiting in finding memory leaks. Hacker stuff only.]) USE_LEAKFINDER="yes" AM_CONDITIONAL(MAKE_LEAKFINDER, true) fi ]) USE_IDENT=1 AC_ARG_ENABLE(ident-lookups, [ --disable-ident-lookups This allows you to remove code that performs Ident (RFC 931) lookups.], [ if test "$enableval" = "no" ; then echo "Disabling Ident Lookups" USE_IDENT=0 fi ]) if test $USE_IDENT = 1; then AC_DEFINE(USE_IDENT, 1, [Compile in support for Ident (RFC 931) lookups? Enabled by default.]) fi AM_CONDITIONAL(USE_DNSSERVER, false) use_dnsserver= AC_ARG_ENABLE(internal-dns, [ --disable-internal-dns This prevents Squid from directly sending and receiving DNS messages, and instead enables the old external 'dnsserver' processes.], [ if test "$enableval" = "no" ; then echo "Disabling Internal DNS queries" use_dnsserver="yes" fi ]) if test "$use_dnsserver" = "yes"; then AC_DEFINE(USE_DNSSERVERS, 1, [If --disable-internal-dns was given to configure, then we'll use the dnsserver processes instead.]) AM_CONDITIONAL(USE_DNSSERVER, true) dnl Some platforms need -lresolv when using --disable-internal-dns case "$host" in *-solaris*) LIBS="$LIBS -lresolv" ;; *-cygwin*) LIBS="$LIBS -lresolv" ;; esac fi AC_ARG_ENABLE(truncate, [ --enable-truncate This uses truncate() instead of unlink() when removing cache files. Truncate gives a little performance improvement, but may cause problems when used with async I/O. Truncate uses more filesystem inodes than unlink..], [ if test "$enableval" = "yes" ; then echo "Enabling truncate instead of unlink" AC_DEFINE(USE_TRUNCATE, 1, [Do we want to use truncate(2) or unlink(2)?]) fi ]) dnl Select Default hosts file location AC_ARG_ENABLE(default-hostsfile, [ --enable-default-hostsfile=path Select default location for hosts file. See hosts_file directive in squid.conf for details], [ if test "$enableval" != "none" ; then if test -f $enableval; then OPT_DEFAULT_HOSTS=$enableval else echo "Warning Unable to find $enableval" sleep 5 fi else OPT_DEFAULT_HOSTS="none" fi echo "Default hosts file set to: $enableval" ],[OPT_DEFAULT_HOSTS="/etc/hosts"]) AC_SUBST(OPT_DEFAULT_HOSTS) dnl Enable WIN32 Service compile mode AC_ARG_ENABLE(win32-service, [ --enable-win32-service Compile Squid as a WIN32 Service Works only on Windows NT and Windows 2000 Platforms.], [ if test "$enableval" = "yes" ; then echo "Enabling WIN32 run service mode" AC_DEFINE(USE_WIN32_SERVICE,1,[Define Windows NT & Windows 2000 run service mode]) fi ]) dnl Select auth schemes modules to build AC_ARG_ENABLE(auth, [ --enable-auth="list of auth scheme modules" Build support for the list of authentication schemes. The default is to build support for the Basic scheme. See src/auth for a list of available modules, or Programmers Guide section authentication schemes for details on how to build your custom auth scheme module], [ case $enableval in yes) for module in $srcdir/src/auth/*; do name="`basename $module`" case $name in CVS) # Ignore ;; *) if test -d $module; then AUTH_MODULES="$AUTH_MODULES $name" fi ;; esac done ;; no) ;; *) AUTH_MODULES="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" ;; esac ], [ if test -z "$AUTH_MODULES"; then AUTH_MODULES="basic" fi ]) if test -z "$AUTH_MODULES"; then echo "Auth scheme modules built: None" else echo "Auth scheme modules built: $AUTH_MODULES" AUTH_OBJS="auth/lib`echo $AUTH_MODULES|sed -e 's% %.a auth/lib%g'`.a" AUTH_LIBS="`echo $AUTH_OBJS|sed -e 's%auth/%%g'`" fi AC_SUBST(AUTH_MODULES) AC_SUBST(AUTH_OBJS) AC_SUBST(AUTH_LIBS) AC_ARG_ENABLE(basic-auth-helpers, [ --enable-basic-auth-helpers="list of helpers" This option selects which basic scheme proxy_auth helpers to build and install as part of the normal build process. For a list of available helpers see the helpers/basic_auth directory.], [ case "$enableval" in yes) echo "ERROR: --enable-basic-auth-helpers requires an argument" exit 1 ;; no) ;; *) BASIC_AUTH_HELPERS="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" esac ]) if test -n "$BASIC_AUTH_HELPERS"; then for helper in $BASIC_AUTH_HELPERS; do if test -f $srcdir/helpers/basic_auth/$helper/Makefile.in; then if test "$helper" = "SASL"; then require_sasl=yes fi else echo "ERROR: Basic auth helper $helper does not exists" exit 1 fi done echo "Basic auth helpers built: $BASIC_AUTH_HELPERS" fi AC_SUBST(BASIC_AUTH_HELPERS) dnl Select ntlm auth helpers to build NTLM_AUTH_HELPERS= AC_ARG_ENABLE(ntlm-auth-helpers, [ --enable-ntlm-auth-helpers="list of helpers" This option selects which proxy_auth ntlm helpers to build and install as part of the normal build process. For a list of available helpers see the helpers/ntlm_auth directory.], [ case "$enableval" in yes) echo "ERROR: --enable-ntlm-auth-helpers requires an argument" exit 1 ;; no) ;; *) NTLM_AUTH_HELPERS="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" esac ]) if test -n "$NTLM_AUTH_HELPERS"; then for helper in $NTLM_AUTH_HELPERS; do if test -f $srcdir/helpers/ntlm_auth/$helper/Makefile.in; then : else echo "ERROR: NTLM auth helper $helper does not exists" exit 1 fi done echo "NTLM auth helpers built: $NTLM_AUTH_HELPERS" fi AC_SUBST(NTLM_AUTH_HELPERS) dnl Select digest auth scheme helpers to build DIGEST_AUTH_HELPERS= AC_ARG_ENABLE(digest-auth-helpers, [ --enable-digest-auth-helpers="list of helpers" This option selects which digest scheme proxy_auth helpers to build and install as part of the normal build process. For a list of available helpers see the helpers/digest_auth directory.], [ case "$enableval" in yes) echo "ERROR: --enable-digest-auth-helpers requires an argument" exit 1 ;; no) ;; *) DIGEST_AUTH_HELPERS="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" esac ]) if test -n "$DIGEST_AUTH_HELPERS"; then for helper in $DIGEST_AUTH_HELPERS; do if test -f $srcdir/helpers/digest_auth/$helper/Makefile.in; then : else echo "ERROR: digest auth helper $helper does not exists" exit 1 fi done echo "Digest auth helpers built: $DIGEST_AUTH_HELPERS" fi AC_SUBST(DIGEST_AUTH_HELPERS) dnl Select negotiate auth scheme helpers to build NEGOTIATE_AUTH_HELPERS= AC_ARG_ENABLE(negotiate-auth-helpers, [ --enable-negotiate-auth-helpers="list of helpers" This option selects which negotiate scheme authentication helpers to build and install as part of the normal build process. For a list of available helpers see the helpers/negotiate_auth directory.], [ case "$enableval" in yes) echo "ERROR: --enable-negotiate-auth-helpers requires an argument" exit 1 ;; no) ;; *) NEGOTIATE_AUTH_HELPERS="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" esac ]) if test -n "$NEGOTIATE_AUTH_HELPERS"; then for helper in $NEGOTIATE_AUTH_HELPERS; do if test -f $srcdir/helpers/negotiate_auth/$helper/Makefile.in; then : else echo "ERROR: negotiate auth helper $helper does not exists" exit 1 fi done echo "Negotiate auth helpers built: $NEGOTIATE_AUTH_HELPERS" fi AC_SUBST(NEGOTIATE_AUTH_HELPERS) dnl Enable "NTLM fail open" AC_ARG_ENABLE(ntlm-fail-open, [ --enable-ntlm-fail-open Enable NTLM fail open, where a helper that fails one of the Authentication steps can allow squid to still authenticate the user.], [ if test "$enableval" = "yes" ; then AC_DEFINE(NTLM_FAIL_OPEN, 1, [Define if NTLM is allowed to fail gracefully when a helper has problems]) fi ]) dnl Select external_acl helpers to build EXTERNAL_ACL_HELPERS= AC_ARG_ENABLE(external-acl-helpers, [ --enable-external-acl-helpers="list of helpers" This option selects which external_acl helpers to build and install as part of the normal build process. For a list of available helpers see the helpers/external_acl directory.], [ case "$enableval" in yes) echo "ERROR: --enable-external-acl-helpers requires an argument" exit 1 ;; no) ;; *) EXTERNAL_ACL_HELPERS="`echo $enableval| sed -e 's/,/ /g;s/ */ /g'`" esac ]) if test -n "$EXTERNAL_ACL_HELPERS"; then for helper in $EXTERNAL_ACL_HELPERS; do if test -f $srcdir/helpers/external_acl/$helper/Makefile.in; then : else echo "ERROR: external acl helper $helper does not exists" exit 1 fi done echo "External acl helpers built: $EXTERNAL_ACL_HELPERS" fi AC_SUBST(EXTERNAL_ACL_HELPERS) dnl Check for Cyrus SASL if test "$require_sasl" = "yes"; then AC_CHECK_HEADERS(sasl/sasl.h sasl.h) if test "$ac_cv_header_sasl_sasl_h" = "yes"; then echo "using SASL2" LIBSASL="-lsasl2" else if test "$ac_cv_header_sasl_h" = "yes"; then echo "using SASL" LIBSASL="-lsasl" else echo "ERROR: Neither SASL nor SASL2 found" exit 1 fi fi AC_SUBST(LIBSASL) fi dnl Disable "unlinkd" code AC_ARG_ENABLE(unlinkd, [ --disable-unlinkd Do not use unlinkd], [ if test "$enableval" = "no" ; then use_unlinkd=no else use_unlinkd=yes fi ],[ # Here we should probably use some magic depending on the selected # storage models use_unlinkd=yes ]) if test "$use_unlinkd" = "yes"; then echo "unlinkd enabled" AC_DEFINE(USE_UNLINKD, 1, [Define this if unlinkd is required (strongly recommended for ufs storage type)]) AM_CONDITIONAL(ENABLE_UNLINKD, true) else echo "unlinkd disabled" AM_CONDITIONAL(ENABLE_UNLINKD, false) fi dnl Enable backtraces on fatal errors AC_ARG_ENABLE(stacktraces, [ --enable-stacktraces Enable automatic call backtrace on fatal errors], [ if test "$enableval" = "yes" ; then echo "Enabling automatic stack backtraces on fatal errors" AC_DEFINE(PRINT_STACK_TRACE, 1, [Print stacktraces on fatal errors]) if test "$GCC" = "yes"; then LDFLAGS="$LDFLAGS -rdynamic" fi fi ]) dnl Enable X-Accelerator-Vary for Vary support within an accelerator setup AC_ARG_ENABLE(x_accelerator_vary, [ --enable-x-accelerator-vary Enable support for the X-Accelerator-Vary HTTP header. Can be used to indicate variance within an accelerator setup. Typically used together with other code that adds custom HTTP headers to the requests.], [ if test "$enableval" = "yes" ; then echo "Enabling support for X-Accelerator-Vary" AC_DEFINE(X_ACCELERATOR_VARY, 1, [Enable support for the X-Accelerator-Vary HTTP header]) fi ]) AC_ARG_ENABLE(follow-x-forwarded-for, [ --enable-follow-x-forwarded-for Enable support for following the X-Forwarded-For HTTP header to try to find the IP address of the original or indirect client when a request has been forwarded through other proxies.], [ if test "$enableval" = "yes" ; then echo "follow X-Forwarded-For enabled" AC_DEFINE(FOLLOW_X_FORWARDED_FOR, 1, [Enable following X-Forwarded-For headers]) AC_SEARCH_LIBS(inet_aton, resolv) dnl some systems don't have this in libc fi ]) # Force some compilers to use ANSI features # case "$host" in alpha-dec-osf*) if test "$ac_cv_prog_CC" = "cc" ; then echo "adding '-std1' to cc args for $host" CC="cc -std1"; ac_cv_prog_CC="$CC" fi ;; *-hp-hpux*) if test "$ac_cv_prog_CC" = "cc" ; then echo "adding '-Ae' to cc args for $host" CC="cc -Ae"; ac_cv_prog_CC="$CC" fi ;; esac dnl Check for programs AC_PROG_EGREP AC_PROG_CPP AC_PROG_INSTALL AC_PROG_RANLIB AC_PROG_LN_S AC_PATH_PROG(SH, sh, /bin/sh) AC_PATH_PROG(FALSE, false, /usr/bin/false) AC_PATH_PROG(TRUE, true, /usr/bin/true) AC_PATH_PROG(RM, rm, $FALSE) AC_PATH_PROG(MV, mv, $FALSE) AC_PATH_PROG(MKDIR, mkdir, $FALSE) AC_PATH_PROG(LN, ln, cp) AC_PATH_PROG(PERL, perl, none) dnl automake handles this AC_PATH_PROG(MAKEDEPEND, makedepend, $TRUE) AC_PATH_PROG(AR, ar, $FALSE) if test "$ac_cv_path_PERL" = "none"; then echo "Perl is required to compile Squid" echo "Please install Perl and then re-run configure" exit 1 fi case "$host" in *-hp-hpux*) echo "Disabling 'ranlib' for HP-UX..." RANLIB=":" ;; esac dnl set $(AR) AR_R="$AR r" case "$host" in *-next-nextstep3) AR="libtool -o" ;; esac AC_SUBST(AR_R) dnl Check for headers AC_HEADER_DIRENT AC_HEADER_STDC dnl Check for headers. sys/types.h and stddef.h and limits must be first (see below) AC_CHECK_HEADERS( sys/types.h \ stddef.h \ limits.h \ sys/param.h \ sys/socket.h \ netinet/in.h \ stdio.h \ stdlib.h \ arpa/inet.h \ arpa/nameser.h \ assert.h \ bstring.h \ crypt.h \ ctype.h \ errno.h \ execinfo.h \ fcntl.h \ fnmatch.h \ getopt.h \ glob.h \ gnumalloc.h \ grp.h \ libc.h \ linux/netfilter_ipv4.h \ linux/netfilter_ipv4/ip_tproxy.h \ malloc.h \ math.h \ memory.h \ mount.h \ net/if.h \ net/pfvar.h \ netdb.h \ netinet/if_ether.h \ netinet/tcp.h \ openssl/err.h \ openssl/md5.h \ openssl/ssl.h \ openssl/engine.h \ paths.h \ poll.h \ pwd.h \ regex.h \ resolv.h \ sched.h \ signal.h \ stdarg.h \ string.h \ strings.h \ sys/bitypes.h \ sys/file.h \ sys/ioctl.h \ sys/mount.h \ md5.h \ sys/md5.h \ sys/msg.h \ sys/prctl.h \ sys/resource.h \ sys/poll.h \ sys/select.h \ sys/stat.h \ sys/statfs.h \ sys/statvfs.h \ syscall.h \ sys/syscall.h \ sys/time.h \ sys/un.h \ sys/vfs.h \ sys/wait.h \ sys/event.h \ syslog.h \ time.h \ unistd.h \ utime.h \ varargs.h \ byteswap.h \ glib.h \ stdint.h \ inttypes.h \ grp.h \ nss_common.h \ nss.h \ db.h \ db_185.h \ aio.h \ sys/capability.h \ ,,,[ #if HAVE_SYS_TYPES_H #include #endif #if HAVE_STDDEF_H #include #endif #if HAVE_LIMITS_H #include #endif #if HAVE_SYS_PARAM_H #include #endif #if HAVE_SYS_SOCKET_H #include #endif #if HAVE_STDIO_H #include #endif #if HAVE_STDLIB_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_NET_IF_H #include #endif #if HAVE_NETINET_IF_ETHER_H #include #endif ]) dnl Check for IP-Filter headers. These are a bit nasty.. AC_CHECK_HEADERS( \ ip_compat.h \ ip_fil_compat.h \ ip_fil.h \ ip_nat.h \ ipl.h \ netinet/ip_compat.h \ netinet/ip_fil_compat.h \ netinet/ip_fil.h \ netinet/ip_nat.h \ netinet/ipl.h \ ,,,[ #if HAVE_SYS_TYPES_H #include #endif #if HAVE_STDDEF_H #include #endif #if HAVE_LIMITS_H #include #endif #if HAVE_SYS_PARAM_H #include #endif #if HAVE_SYS_SOCKET_H #include #endif #if HAVE_STDIO_H #include #endif #if HAVE_STDLIB_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_NET_IF_H #include #endif #if HAVE_NETINET_IF_ETHER_H #include #endif #if HAVE_IP_COMPAT_H #include #elif HAVE_NETINET_IP_COMPAT_H #include #endif #if HAVE_IP_FIL_H #include #elif HAVE_NETINET_IP_FIL_H #include #endif ]) AC_C_CONST AC_C_BIGENDIAN AC_C_INLINE AC_CACHE_CHECK(if ANSI prototypes work,ac_cv_have_ansi_prototypes, [ AC_TRY_COMPILE([int foo(char *); int foo (char *bar) {return 1;}], [foo("bar")], ac_cv_have_ansi_prototypes="yes", ac_cv_have_ansi_prototypes="no") ]) if test $ac_cv_have_ansi_prototypes = "yes" ; then AC_DEFINE(HAVE_ANSI_PROTOTYPES, 1, [Define if your compiler supports prototyping]) fi AC_CACHE_CHECK(for tm->tm_gmtoff,ac_cv_have_tm_gmoff, [ AC_TRY_COMPILE([#include #include ], [struct tm foo; foo.tm_gmtoff = 0;], ac_cv_have_tm_gmoff="yes", ac_cv_have_tm_gmoff="no") ]) if test $ac_cv_have_tm_gmoff = "yes" ; then AC_DEFINE(HAVE_TM_GMTOFF, 1, [Define if struct tm has tm_gmtoff member]) fi AC_CACHE_CHECK(for struct mallinfo,ac_cv_have_struct_mallinfo, [ AC_TRY_COMPILE([#include #if HAVE_MALLOC_H #include #endif], [struct mallinfo foo; foo.arena = 0; foo.ordblks = 0; foo.smblks = 0; foo.hblks = 0; foo.hblkhd = 0; foo.uordblks = 0; foo.fordblks = 0; foo.keepcost = 0;], ac_cv_have_struct_mallinfo="yes", ac_cv_have_struct_mallinfo="no") ]) if test $ac_cv_have_struct_mallinfo = "yes" ; then AC_DEFINE(HAVE_STRUCT_MALLINFO, 1, [we check for the existance of struct mallinfo]) fi AC_CACHE_CHECK(for extended mallinfo,ac_cv_have_ext_mallinfo, [ AC_TRY_COMPILE([#include #include ], [struct mallinfo foo; foo.mxfast = 0;], ac_cv_have_ext_mallinfo="yes", ac_cv_have_ext_mallinfo="no") ]) if test $ac_cv_have_ext_mallinfo = "yes" ; then AC_DEFINE(HAVE_EXT_MALLINFO, 1, [Define if struct mallinfo has mxfast member]) fi case "$host_os" in mingw|mingw32) AC_DEFINE(HAVE_STRUCT_RUSAGE) ac_cv_func_getrusage='yes' echo "Using own rusage on Windows." ;; *) AC_CACHE_CHECK(for struct rusage,ac_cv_have_struct_rusage, [ AC_TRY_COMPILE([ #if HAVE_SYS_TIME_H #include #endif #if HAVE_SYS_RESOURCE_H #include #endif], [struct rusage R;], ac_cv_have_struct_rusage="yes", ac_cv_have_struct_rusage="no") ]) if test $ac_cv_have_struct_rusage = "yes" ; then AC_DEFINE(HAVE_STRUCT_RUSAGE, 1, [Define if you have struct rusage]) fi ;; esac AC_CACHE_CHECK(for ip->ip_hl, ac_cv_have_ip_hl, [ AC_TRY_COMPILE([#include #include #include #include #if defined (__linux__) || defined (__CYGWIN__) #define ip_hl ihl #endif #ifndef __linux__ #ifndef __CYGWIN__ #define iphdr ip #endif #endif], [struct iphdr ip; ip.ip_hl= 0;], ac_cv_have_ip_hl="yes", ac_cv_have_ip_hl="no") ]) if test $ac_cv_have_ip_hl = "yes" ; then AC_DEFINE(HAVE_IP_HL, 1, [Define if struct ip has ip_hl member]) fi dnl Check for typedefs AC_CHECK_SIZEOF(void *) AC_CHECK_SIZEOF(char) AC_CHECK_SIZEOF(short) AC_CHECK_SIZEOF(int) AC_CHECK_SIZEOF(long) AC_CHECK_SIZEOF(long long) AC_CHECK_SIZEOF_SYSTYPE(int8_t) AC_CHECK_SIZEOF_SYSTYPE(uint8_t) AC_CHECK_SIZEOF_SYSTYPE(u_int8_t) AC_CHECK_SIZEOF_SYSTYPE(int16_t) AC_CHECK_SIZEOF_SYSTYPE(uint16_t) AC_CHECK_SIZEOF_SYSTYPE(u_int16_t) AC_CHECK_SIZEOF_SYSTYPE(int32_t) AC_CHECK_SIZEOF_SYSTYPE(uint32_t) AC_CHECK_SIZEOF_SYSTYPE(u_int32_t) AC_CHECK_SIZEOF_SYSTYPE(int64_t) AC_CHECK_SIZEOF_SYSTYPE(uint64_t) AC_CHECK_SIZEOF_SYSTYPE(u_int64_t) AC_CHECK_SIZEOF_SYSTYPE(__int64) dnl int8_t if test "x$ac_cv_sizeof_char" = "x1"; then AC_CHECK_SYSTYPE(int8_t,char) fi dnl u_int8_t if test "x$ac_cv_sizeof_uint8_t" = "x1"; then AC_CHECK_SYSTYPE(u_int8_t,uint8_t) elif test "x$ac_cv_sizeof_char" = "x1"; then AC_CHECK_SYSTYPE(u_int8_t,unsigned char) fi dnl uint8_t if test "x$ac_cv_sizeof_u_int8_t" = "x1"; then AC_CHECK_SYSTYPE(uint8_t,u_int8_t) elif test "x$ac_cv_sizeof_char" = "x1"; then AC_CHECK_SYSTYPE(uint8_t,unsigned char) fi dnl int16_t if test "x$ac_cv_sizeof_short" = "x2"; then AC_CHECK_SYSTYPE(int16_t,short) elif test "x$ac_cv_sizeof_int" = "x2"; then AC_CHECK_SYSTYPE(int16_t,int) fi dnl u_int16_t if test "x$ac_cv_sizeof_uint16_t" = "x2"; then AC_CHECK_SYSTYPE(u_int16_t,uint16_t) elif test "x$ac_cv_sizeof_short" = "x2"; then AC_CHECK_SYSTYPE(u_int16_t,unsigned short) elif test "x$ac_cv_sizeof_int" = "x2"; then AC_CHECK_SYSTYPE(u_int16_t,unsigned int) fi dnl uint16_t if test "x$ac_cv_sizeof_u_int16_t" = "x2"; then AC_CHECK_SYSTYPE(uint16_t,u_int16_t) elif test "x$ac_cv_sizeof_short" = "x2"; then AC_CHECK_SYSTYPE(uint16_t,unsigned short) elif test "x$ac_cv_sizeof_int" = "x2"; then AC_CHECK_SYSTYPE(uint16_t,unsigned int) fi dnl int32_t if test "x$ac_cv_sizeof_int" = "x4"; then AC_CHECK_SYSTYPE(int32_t,int) elif "x$ac_cv_sizeof_long" = "x4"; then AC_CHECK_SYSTYPE(int32_t,long) fi dnl u_int32_t if test "x$ac_cv_sizeof_uint32_t" = "x4"; then AC_CHECK_SYSTYPE(u_int32_t,uint32_t) elif test "x$ac_cv_sizeof_int" = "x4"; then AC_CHECK_SYSTYPE(u_int32_t,unsigned int) elif test "x$ac_cv_sizeof_long" = "x4"; then AC_CHECK_SYSTYPE(u_int32_t,unsigned long) fi dnl uint32_t if test "x$ac_cv_sizeof_u_int32_t" = "x4"; then AC_CHECK_SYSTYPE(uint32_t,u_int32_t) elif test "x$ac_cv_sizeof_int" = "x4"; then AC_CHECK_SYSTYPE(uint32_t,unsigned int) elif test "x$ac_cv_sizeof_long" = "x4"; then AC_CHECK_SYSTYPE(uint32_t,unsigned long) fi dnl int64_t if test "x$ac_cv_sizeof_long" = "x8"; then AC_CHECK_SYSTYPE(int64_t,long) elif test "x$ac_cv_sizeof_long_long" = "x8"; then AC_CHECK_SYSTYPE(int64_t,long long) elif test "x$ac_cv_sizeof___int64" = "x8"; then AC_CHECK_SYSTYPE(int64_t,__int64) fi dnl u_int64_t if test "x$ac_cv_sizeof_uint64_t" = "x8"; then AC_CHECK_SYSTYPE(u_int64_t,uint64_t) elif test "x$ac_cv_sizeof_long" = "x8"; then AC_CHECK_SYSTYPE(u_int64_t,unsigned long) elif test "x$ac_cv_sizeof_long_long" = "x8"; then AC_CHECK_SYSTYPE(u_int64_t,unsigned long long) elif test "x$ac_cv_sizeof___int64" = "x8"; then AC_CHECK_SYSTYPE(u_int64_t,unsigned __int64) fi dnl uint64_t if test "x$ac_cv_sizeof_u_int64_t" = "x8"; then AC_CHECK_SYSTYPE(uint64_t,u_int64_t) elif test "x$ac_cv_sizeof_long" = "x8"; then AC_CHECK_SYSTYPE(uint64_t,unsigned long) elif test "x$ac_cv_sizeof_long_long" = "x8"; then AC_CHECK_SYSTYPE(uint64_t,unsigned long long) elif test "x$ac_cv_sizeof___int64" = "x8"; then AC_CHECK_SYSTYPE(uint64_t,unsigned __int64) fi AC_CHECK_SYSTYPE(pid_t, int) AC_CHECK_SYSTYPE(size_t, unsigned int) AC_CHECK_SYSTYPE(ssize_t, int) AC_CHECK_SYSTYPE(off_t, int) AC_CHECK_SYSTYPE(mode_t, unsigned short) AC_CHECK_SYSTYPE(fd_mask, int) AC_CHECK_SIZEOF_SYSTYPE(off_t, 4) AC_CHECK_SIZEOF_SYSTYPE(size_t, 4) dnl Check for special functions AC_FUNC_ALLOCA dnl Check for type in sys/socket.h AC_CACHE_CHECK(for socklen_t, ac_cv_type_socklen_t, [ AC_EGREP_CPP([socklen_t[^a-zA-Z_0-9]], [#include #include #if STDC_HEADERS #include #include #endif], ac_cv_type_socklen_t=yes, ac_cv_type_socklen_t=no) ]) if test $ac_cv_type_socklen_t = no; then AC_DEFINE(socklen_t, int, [This makes warnings go away. If you have socklen_t defined in your /usr/include files, then this should remain undef'd. Otherwise it should be defined to int.]) fi dnl Check for mtyp_t in some headers AC_CACHE_CHECK(for mtyp_t, ac_cv_type_mtyp_t, [ AC_EGREP_CPP([mtyp_t[^a-zA-Z_0-9]], [#include #include #include ], ac_cv_type_mtyp_t=yes, ac_cv_type_mtyp_t=no) ]) if test $ac_cv_type_mtyp_t = no; then AC_DEFINE(mtyp_t, long, [message type for message queues]) fi use_libcap=auto AC_ARG_WITH(libcap, AS_HELP_STRING([--without-libcap],[disable usage of Linux capabilities library to control privileges]), [ if test "x$withval" = "xyes" ; then AC_MSG_RESULT(libcap forced enabled) use_libcap=yes else AC_MSG_RESULT(libcap forced disabled) use_libcap=no fi ]) if test "x$use_libcap" != "xno"; then # cap_clear_flag is the most recent libcap function we require AC_SEARCH_LIBS(cap_clear_flag, cap) AC_CHECK_FUNCS(cap_clear_flag) if test "x$ac_cv_func_cap_clear_flag" = xyes; then use_libcap=yes else if test "x$use_libcap" = "xyes"; then AC_MSG_ERROR([libcap forced enabled but not available or not usable, requires libcap-2.09 or later]) fi use_libcap=no fi fi if test "x$use_libcap" = "xyes"; then AC_DEFINE(USE_LIBCAP, 1, [use libcap to set capabilities required for TPROXY]) dnl Check for libcap headader breakage. AC_CHECK_HEADERS(sys/capability.h) AC_CACHE_CHECK([for operational libcap2 headers], squid_cv_sys_capability_works, AC_LINK_IFELSE([AC_LANG_PROGRAM([[ #include #include #include ]], [[ capget(NULL, NULL); capset(NULL, NULL); ]])],[squid_cv_sys_capability_works=yes],[squid_cv_sys_capability_works=no]) ) if test x$squid_cv_sys_capability_works != xyes; then AC_DEFINE([LIBCAP_BROKEN],1,[if libcap2 headers are broken and clashing with glibc]) fi fi # Check for needed libraries AX_LIB_SOCKET_NSL # yp_match is in libnsl on some systems, needed by helpers/basic_auth/YP saved_LIBS="$LIBS" AC_SEARCH_LIBS([yp_match], [nsl], [test "$ac_res" = "none required" || NIS_LIBS="$ac_res $NIS_LIBS";LIBS="$saved_LIBS"]) AC_SUBST(NIS_LIBS) dnl Check for Winsock only on MinGW, on Cygwin we must use emulated BSD socket API case "$host_os" in mingw|mingw32) AC_MSG_CHECKING(for winsock) save_LIBS="$LIBS" for curlib in ws2_32 wsock32; do LIBS="$LIBS -l$curlib" AC_TRY_LINK([ char __attribute__((stdcall)) socket(int,int,int); char __attribute__((stdcall)) select(int,int,int,int,int); char __attribute__((stdcall)) closesocket(int); char __attribute__((stdcall)) gethostname(int,int); ], [ socket(1,2,3); select(1,2,3,4,5); closesocket(1); gethostname(1,2); ], have_winsock=yes, have_winsock=no) if test $have_winsock = yes; then ac_cv_func_select='yes' if test $curlib = ws2_32; then have_winsock=winsock2 fi break fi LIBS="$save_LIBS" done AC_MSG_RESULT($have_winsock) if test $have_winsock = winsock2; then AC_CHECK_HEADERS(winsock2.h) else AC_CHECK_HEADERS(winsock.h) fi ;; esac dnl Ripped from the Samba sources AC_CACHE_CHECK([for unix domain sockets],squid_cv_unixsocket, [ AC_TRY_COMPILE([ #include #include #include #include #include ], [ struct sockaddr_un sunaddr; sunaddr.sun_family = AF_UNIX; ], squid_cv_unixsocket=yes,squid_cv_unixsocket=no)]) if test x"$squid_cv_unixsocket" = x"yes"; then AC_DEFINE(HAVE_UNIXSOCKET, 1, [Do we have unix sockets? (required for the winbind ntlm helper]) fi dnl end rip if test "x$ac_cv_enabled_dlmalloc" = "xyes" ; then echo "skipping libmalloc check (--enable-dlmalloc specified)" else dnl prefer gnumalloc if available AC_CHECK_LIB(gnumalloc, malloc) if test "$ac_cv_lib_gnumalloc_main" = "yes"; then echo "Disabling extended malloc functions when using gnumalloc" ac_cv_func_mallinfo=no ac_cv_func_mallocblksize=no ac_cv_func_mallopt=no else case "$host" in *-sun-solaris*) echo "skipping libmalloc check for $host" ;; i386-*-freebsd*) echo "skipping libmalloc check for $host" ;; *) dnl prefer libmalloc if available AC_CHECK_LIB(malloc, malloc) ;; esac fi fi dnl no idea who requires libbsd, or what function to look for. Been around since day 0 dnl but not needed on any of our main platforms and may contain stuff we do not want dnl as can be seen below where -lbsd is removed from many systems dnl AC_CHECK_LIB(bsd, main) dnl prefer separate regex library if available AC_CHECK_LIB(regex, regcomp, [REGEXLIB="-lregex"]) case "$host_os" in mingw|mingw32) dnl Is this special case really required, doesn't AC_CHECK_LIB work? echo "Use MSVCRT for math functions." ;; *) AC_CHECK_LIB(m, rint) ;; esac dnl Check for libcrypt dnl Some of our helpers use crypt(3) which may be in libc, or in dnl libcrypt (eg FreeBSD) saved_LIBS="$LIBS" AC_SEARCH_LIBS([crypt], [crypt], [test "$ac_res" = "none required" || CRYPTLIB="$ac_res $CRYPTLIB";LIBS="$saved_LIBS"]) AC_SUBST(CRYPTLIB) dnl Solaris10 provides MD5 natively through libmd5 dnl FreeBSD provides MD5 natively through libmd AC_SEARCH_LIBS([MD5Init], [md5 md]) dnl Check for libdl, used by auth_modules/PAM if test "$with_dl" = "yes"; then AC_SEARCH_LIBS([dlopen], [dl]) fi dnl Check for pthreads dnl We use pthreads when doing ASYNC I/O if test "$with_pthreads" = "yes"; then CFLAGS="$CFLAGS -D_REENTRANT" case "$host" in i386-unknown-freebsd*) if test "$GCC" = "yes" ; then if test -z "$PRESET_LDFLAGS"; then LDFLAGS="$LDFLAGS -pthread" fi fi ;; *-solaris2.*) if test "$GCC" = "yes" ; then CFLAGS="$CFLAGS -pthreads" else CFLAGS="$CFLAGS -mt" fi ;; esac AC_CHECK_LIB(pthread, pthread_create) fi dnl Check for librt dnl We use AIO in the coss store if test "$with_aio" = "yes"; then dnl On some systems POSIX AIO functions are in libaio AC_SEARCH_LIBS(aio_read, [rt aio]) fi LIB_EPOLL='' dnl Check for libepoll saved_LIBS="$LIBS" AC_SEARCH_LIBS([epoll_ctl], [epoll], [test "$ac_res" = "none required" || LIB_EPOLL="$ac_res $LIB_EPOLL";LIBS="$saved_LIBS"]) AC_SUBST(LIB_EPOLL) dnl -lintl is needed on SCO version 3.2v4.2 for strftime() dnl Robert Side dnl Mon, 18 Jan 1999 17:48:00 GMT case "$host" in *-pc-sco3.2*) AC_SEARCH_LIBS(strftime, intl) ;; esac dnl On MinGW OpenLDAP is not available, so LDAP helpers can be linked dnl only with Windows LDAP libraries using -lwldap32 case "$host_os" in mingw|mingw32) LIB_LDAP="-lwldap32" ;; *) LIB_LDAP="-lldap" dnl LDAP helpers need to know if -llber is needed or not dnl unfortunately there is no well defined function API to dnl look for so we use AC_CHECK_LIB and just check for some dnl C-library function. AC_CHECK_LIB(lber, open, [LIB_LDAP="${LIB_LDAP} -llber"]) ;; esac AC_SUBST(LIB_LDAP) dnl Check for libdb DBLIB= dnl 1.85 AC_CACHE_CHECK(if dbopen needs -ldb,ac_cv_dbopen_libdb, [ SAVED_LIBS="$LIBS"; LIBS="$LIBS -ldb" AC_TRY_LINK([ #if HAVE_SYS_TYPES_H #include #endif #if HAVE_LIMITS_H #include #endif #if HAVE_DB_185_H #include #elif HAVE_DB_H #include #endif], [dbopen((void *)0L, 0, 0, DB_HASH, (void *)0L)], ac_cv_dbopen_libdb="yes", ac_cv_dbopen_libdb="no") LIBS="$SAVED_LIBS" ]) if test $ac_cv_dbopen_libdb = yes; then LIB_DB="-ldb" fi AC_SUBST(LIB_DB) dnl System-specific library modifications dnl case "$host" in i386-*-solaris2.*) if test "$GCC" = "yes"; then echo "Removing -O for gcc on $host" CFLAGS="`echo $CFLAGS | sed -e 's/-O[[0-9]]*//'`" fi ;; *-sgi-irix*) echo "Removing -lsocket for IRIX..." LIBS=`echo $LIBS | sed -e s/-lsocket//` echo "Removing -lnsl for IRIX..." LIBS=`echo $LIBS | sed -e s/-lnsl//` ac_cv_lib_nsl_main=no echo "Removing -lbsd for IRIX..." LIBS=`echo $LIBS | sed -e s/-lbsd//` ;; dnl From: c0032033@ws.rz.tu-bs.de (Joerg Schumacher) dnl Date: Thu, 17 Oct 1996 04:09:30 +0200 dnl Please change your configure script. AIX doesn't need -lbsd. *-ibm-aix*) echo "Removing -lbsd for AIX..." LIBS=`echo $LIBS | sed -e s/-lbsd//` case "$host" in dnl From: mlaster@metavillage.com (Mike Laster) dnl AIX 4.1.4.x does not have header files for snprintf/vsnprintf dnl So using the internal versions generates a load of warnings dnl during compile. *-ibm-aix4*) echo "disabling snprintf/vsnprintf for $host" ac_cv_func_snprintf=no ac_cv_func_vsnprintf=no ;; esac ;; *m88k*-openbsd*) ;; *m88k*) CFLAGS="$CFLAGS -D_SQUID_MOTOROLA_" AC_DEFINE(GETTIMEOFDAY_NO_TZP, 1, [If gettimeofday is known to take only one argument]) ;; [*-*-solaris2.[0-4]]) AC_DEFINE(GETTIMEOFDAY_NO_TZP, 1, [If gettimeofday is known to take only one argument]) ;; [*-sony-newsos[56]*]) AC_DEFINE(GETTIMEOFDAY_NO_TZP, 1, [If gettimeofday is known to take only one argument]) ;; esac # Remove optimization for GCC 2.95.[123] # gcc -O[2] on *BSD and Linux (x86) causes pointers to magically become NULL if test "$GCC" = "yes"; then GCCVER=`$CC -v 2>&1 | awk '$2 == "version" {print $3}'` case "$GCCVER" in [2.95.[123]]) echo "Removing -O for gcc on $host with GCC $GCCVER" CFLAGS="`echo $CFLAGS | sed -e 's/-O[[0-9]]*//'`" ;; esac fi # Recommended by Balint Nagy Endre case "$host" in *-univel-sysv4.2MP) if test `uname -v` = "2.03"; then echo "disabling mallinfo for $host" ac_cv_func_mallinfo=no fi ;; esac dnl This has to be before AC_CHECK_FUNCS # Disable poll() on certain platforms. Override by setting ac_cv_func_poll # when running configure. if test -z "$ac_cv_func_poll"; then case "$host" in [alpha-dec-osf3.*]) # John Kay (jkay@nlanr.net) 19970818 echo "disabling poll for $host..." ac_cv_func_poll='no' ;; [*-hp-hpux*.*]) # Duane Wessels echo "disabling poll for $host..." ac_cv_func_poll='no' ;; [*-linux-*]) # Henrik Nordstrom (hno@squid-cache.org) 19980817 # poll is problematic on Linux. We disable it # by default until Linux gets it right. # See also bug #932 rev=`uname -r | awk -F. '{printf "%03d%03d",$1,$2}'` if test $rev -lt 002004; then echo "disabling poll for $host < 2.4..." ac_cv_func_poll='no' fi ;; [powerpc-ibm-aix4.1.*]) # Mike Laster (mlaster@metavillage.com) 19981021 echo "disabling poll for $host..." ac_cv_func_poll='no' ;; [*-pc-sco3.2*]) # Robert Side # Mon, 18 Jan 1999 17:48:00 GMT echo "disabling poll for $host..." ac_cv_func_poll='no' ;; esac fi dnl Override statfs detect on MinGW because is emulated in source code case "$host_os" in mingw|mingw32) ac_cv_func_statfs='yes' ;; esac dnl Check for library functions AC_CHECK_FUNCS(\ bcopy \ backtrace_symbols_fd \ fchmod \ getdtablesize \ getpagesize \ getpass \ getrusage \ getspnam \ gettimeofday \ glob \ kqueue \ lrand48 \ mallinfo \ mallocblksize \ MD5Init \ mallopt \ memcpy \ memmove \ memset \ mkstemp \ mktime \ mstats \ poll \ prctl \ pthread_attr_setscope \ pthread_setschedparam \ pthread_attr_setschedparam \ pthread_sigmask \ putenv \ random \ regcomp \ regexec \ regfree \ res_init \ __res_init \ rint \ sbrk \ select \ seteuid \ setgroups \ setpgrp \ setrlimit \ getrlimit \ setsid \ sigaction \ snprintf \ socketpair \ srand48 \ srandom \ statfs \ strsep \ strtoll \ sysconf \ syslog \ timegm \ vsnprintf \ ) SAVED_LIBS="$LIBS" LIBS="$LIBS $LIB_EPOLL" AC_CHECK_FUNCS(epoll_ctl) LIBS="$SAVED_LIBS" SAVED_LIBS="$LIBS" LIBS="$LIBS $CRYPTLIB" AC_CHECK_FUNCS(crypt) LIBS="$SAVED_LIBS" dnl Verify that epoll really works if test $ac_cv_func_epoll_ctl = yes; then AC_CACHE_CHECK(if epoll works, ac_cv_epoll_works, AC_TRY_RUN([ #include #include #include int main(int argc, char **argv) { int fd = epoll_create(256); if (fd < 0) { perror("epoll_create:"); exit(1); } exit(0); } ], [ac_cv_epoll_works=yes], [ac_cv_epoll_works=no])) if test ac_cv_epoll_works = no && test ac_force_epoll = yes; then echo "Error - no epoll found"; echo "Try running 'sh ./scripts/get_epoll-lib.sh'"; echo "then run configure again"; exit -1 fi fi dnl Magic which checks whether we are forcing a type of comm loop we dnl are actually going to (ab)use dnl Actually do the define magic now dnl mostly ripped from squid-commloops, thanks to adrian and benno if test -n "$SELECT_TYPE"; then : # Nothing to do elif test "$ac_cv_epoll_works" = "yes" ; then SELECT_TYPE="epoll" elif test "$ac_cv_func_kqueue" = "yes" ; then SELECT_TYPE="kqueue" elif test "$ac_cv_func_poll" = "yes" ; then SELECT_TYPE="poll" elif test "$ac_cv_func_select" = "yes" ; then case "$host_os" in mingw|mingw32) SELECT_TYPE="select_win32" ;; *) SELECT_TYPE="select" ;; esac else echo "Eep! Can't find poll, epoll, kqueue or select!" echo "I'll try select and hope for the best." SELECT_TYPE="select" fi echo "Using ${SELECT_TYPE} for the IO loop." AM_CONDITIONAL([USE_POLL], [test $SELECT_TYPE = poll]) AM_CONDITIONAL([USE_EPOLL], [test $SELECT_TYPE = epoll]) AM_CONDITIONAL([USE_SELECT], [test $SELECT_TYPE = select]) AM_CONDITIONAL([USE_SELECT_SIMPLE], [test $SELECT_TYPE = select_simple]) AM_CONDITIONAL([USE_SELECT_WIN32], [test $SELECT_TYPE = select_win32]) AM_CONDITIONAL([USE_KQUEUE], [test $SELECT_TYPE = kqueue]) AM_CONDITIONAL([USE_DEVPOLL], [test $SELECT_TYPE = devpoll]) dnl Hmm.. some OS:es (i.e. FreeBSD) can't handle large AF_UNIX dgram packets. dnl Verify that at least 16K is supported, if not fall back on using dnl IP dgram sockets for IPC. AC_CACHE_CHECK(if AF_UNIX dgram sockets support large packets, ac_cv_af_unix_large_dgram, AC_TRY_RUN([ #include #include #if HAVE_SYS_SELECT_H #include #else #include #endif #include #include #include #define BUFSIZE 16384 void consumer(int s, int p) { fd_set fds; char buf[[BUFSIZE]]; int len; int nfds = p > s ? p + 1 : s + 1; int rc; FD_ZERO(&fds); FD_SET(s, &fds); FD_SET(p, &fds); rc = select(nfds, &fds, NULL, NULL, NULL); if (rc < 0) exit(1); if (FD_ISSET(s, &fds)) len = recv(s, buf, sizeof(buf), 0); } void sender(int s, int p) { char buf[[BUFSIZE]]; int len = sizeof(buf); int rc = send(s, buf, len, 0); if (rc < 0) { perror("send"); exit(1); } if (rc != len) { fprintf(stderr, "Short send %d of %d\n", rc, len); exit(1); } } int main(int argc, char **argv) { int s[[2]]; int p[[2]]; pid_t pid; socketpair(AF_UNIX, SOCK_DGRAM, 0, s); pipe(p); pid = fork(); if (pid < 0) { perror("fork"); exit(0); } if (pid == 0) { close(s[[0]]); close(p[[0]]); consumer(s[[1]],p[[1]]); } else { close(s[[1]]); close(p[[1]]); sender(s[[0]],p[[0]]); } return 0; } ], ac_cv_af_unix_large_dgram="yes",ac_cv_af_unix_large_dgram="no") ) if test "$ac_cv_af_unix_large_dgram" = "yes" ; then AC_DEFINE(SUPPORTS_LARGE_AF_UNIX_DGRAM, 1, [Supports large dgram sockets over AF_UNIX sockets]) fi dnl Yay! Another Linux brokenness. Its not good enough dnl to know that setresuid() exists, because RedHat 5.0 declares dnl setresuid() but doesn't implement it. dnl AC_CACHE_CHECK(if setresuid is implemented, ac_cv_func_setresuid, AC_TRY_RUN([ #include int main() { if(setresuid(-1,-1,-1)) { perror("setresuid:"); exit(1); } exit(0); } ],ac_cv_func_setresuid="yes",ac_cv_func_setresuid="no") ) if test "$ac_cv_func_setresuid" = "yes" ; then AC_DEFINE(HAVE_SETRESUID, 1, [Yay! Another Linux brokenness. Its not good enough to know that setresuid() exists, because RedHat 5.0 declare setresuid() but doesn't implement it.]) fi AM_CONDITIONAL(NEED_OWN_SNPRINTF, false) if test "$ac_cv_func_snprintf" = "no" || test "$ac_cv_func_vsnprintf" = "no" ; then AM_CONDITIONAL(NEED_OWN_SNPRINTF, true) fi AM_CONDITIONAL(NEED_OWN_STRSEP, false) if test "$ac_cv_func_strsep" = "no" ; then AM_CONDITIONAL(NEED_OWN_STRSEP, true) fi dnl dnl Test for va_copy dnl AC_CACHE_CHECK(if va_copy is implemented, ac_cv_func_va_copy, AC_TRY_RUN([ #include void f (int i, ...) { va_list args1, args2; va_start (args1, i); va_copy (args2, args1); if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42) exit (1); va_end (args1); va_end (args2); } int main() { f (0, 42); return 0; } ],ac_cv_func_va_copy="yes",ac_cv_func_va_copy="no") ) if test "$ac_cv_func_va_copy" = "yes" ; then AC_DEFINE(HAVE_VA_COPY, 1, [Some systems dont have va_copy]) fi dnl dnl Some systems support __va_copy dnl AC_CACHE_CHECK(if __va_copy is implemented, ac_cv_func___va_copy, AC_TRY_RUN([ #include void f (int i, ...) { va_list args1, args2; va_start (args1, i); __va_copy (args2, args1); if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42) exit (1); va_end (args1); va_end (args2); } int main() { f (0, 42); return 0; } ],ac_cv_func___va_copy="yes",ac_cv_func___va_copy="no") ) if test "$ac_cv_func___va_copy" = "yes" ; then AC_DEFINE(HAVE___VA_COPY, 1, [Some systems support __va_copy]) fi dnl IP-Filter support requires ipf header files. These aren't dnl installed by default, so we need to check for them if test "$IPF_TRANSPARENT" ; then AC_MSG_CHECKING(if IP-Filter header files are installed) # hold on to your hats... if test "$ac_cv_header_ip_compat_h" = "yes" || test "$ac_cv_header_ip_fil_compat_h" = "yes" || test "$ac_cv_header_netinet_ip_compat_h" = "yes" || test "$ac_cv_header_netinet_ip_fil_compat_h" = "yes" ; then have_ipfilter_compat_header="yes" fi if test "x$have_ipfilter_compat_header" = "xyes" && test "$ac_cv_header_ip_fil_h" = "yes" && test "$ac_cv_header_ip_nat_h" = "yes" ; then IPF_TRANSPARENT="yes" AC_DEFINE(IPF_TRANSPARENT, 1, [Enable support for Transparent Proxy on systems using IP-Filter address redirection. This provides "masquerading" support for non Linux system.]) elif test "$have_ipfilter_compat_header" = "yes" && test "$ac_cv_header_netinet_ip_fil_h" = "yes" && test "$ac_cv_header_netinet_ip_nat_h" = "yes" ; then IPF_TRANSPARENT="yes" AC_DEFINE(IPF_TRANSPARENT, 1, [Enable support for Transparent Proxy on systems using IP-Filter address redirection. This provides "masquerading" support for non Linux system.]) else IPF_TRANSPARENT="no" AC_DEFINE(IPF_TRANSPARENT, 0, [Enable support for Transparent Proxy on systems using IP-Filter address redirection. This provides "masquerading" support for non Linux system.]) fi AC_MSG_RESULT($IPF_TRANSPARENT) fi if test "$IPF_TRANSPARENT" = "no" ; then echo "WARNING: Cannot find necessary IP-Filter header files" echo " Transparent Proxy support WILL NOT be enabled" sleep 10 fi dnl PF support requires a header file. if test "$PF_TRANSPARENT" ; then AC_MSG_CHECKING(if PF header file is installed) # hold on to your hats... if test "$ac_cv_header_net_pfvar_h" = "yes"; then PF_TRANSPARENT="yes" AC_DEFINE(PF_TRANSPARENT, 1, [Enable support for Transparent Proxy on systems using PF address redirection. This provides "masquerading" support for OpenBSD.]) else PF_TRANSPARENT="no" AC_DEFINE(PF_TRANSPARENT, 0, [Enable support for Transparent Proxy on systems using PF address redirection. This provides "masquerading" support for OpenBSD.]) fi AC_MSG_RESULT($PF_TRANSPARENT) fi if test "$PF_TRANSPARENT" = "no" ; then echo "WARNING: Cannot find necessary PF header file" echo " Transparent Proxy support WILL NOT be enabled" sleep 10 fi dnl Linux-Netfilter support requires Linux 2.4 or newer kernel header files. dnl Shamelessly copied from above if test "$LINUX_NETFILTER" = "yes"; then AC_MSG_CHECKING(if Linux 2.4 or newer kernel header files are installed) # hold on to your hats... if test "$ac_cv_header_linux_netfilter_ipv4_h" = "yes"; then LINUX_NETFILTER="yes" AC_DEFINE(LINUX_NETFILTER, 1, [Enable support for Transparent Proxy on Linux (Netfilter) systems]) else LINUX_NETFILTER="no" AC_DEFINE(LINUX_NETFILTER, 0, [Enable support for Transparent Proxy on Linux (Netfilter) systems]) fi AC_MSG_RESULT($LINUX_NETFILTER) fi if test "$LINUX_NETFILTER" = "no" ; then echo "WARNING: Cannot find necessary Linux kernel header files" echo " Linux Netfilter Transparent Proxy support WILL NOT be enabled" sleep 10 fi dnl Linux Netfilter/TPROXY support requires some specific header files and libcap dnl Shamelessly copied from shamelessly copied from above if test "$LINUX_TPROXY"; then AC_MSG_CHECKING(if TPROXY header files are installed) # hold on to your hats... if test "$ac_cv_header_linux_netfilter_ipv4_ip_tproxy_h" = "yes" && test "$LINUX_NETFILTER" = "yes"; then LINUX_TPROXY="yes" AC_DEFINE(LINUX_TPROXY, 1, [Enable real Transparent Proxy support for Netfilter TPROXY.]) else LINUX_TPROXY="no" AC_DEFINE(LINUX_TPROXY, 0, [Enable real Transparent Proxy support for Netfilter TPROXY.]) fi AC_MSG_RESULT($LINUX_TPROXY) if test "$use_libcap" != "yes"; then AC_MSG_WARN([Missing needed capabilities (libcap or libcap2) for TPROXY]) LINUX_TPROXY="no" sleep 10 fi fi if test "$LINUX_TPROXY" = "no" && test "$LINUX_NETFILTER" = "yes"; then echo "WARNING: Cannot find TPROXY headers, you need to patch your kernel with the" echo "tproxy package from:" echo " - lynx http://www.balabit.com/downloads/files/tproxy/" sleep 10 fi if test -z "$USE_GNUREGEX" ; then case "$host" in *-sun-solaris2.[[0-4]]) USE_GNUREGEX="yes" ;; *-next-nextstep*) USE_GNUREGEX="yes" ;; esac fi AC_MSG_CHECKING(if GNUregex needs to be compiled) if test -z "$USE_GNUREGEX"; then if test "$ac_cv_func_regcomp" = "no" || test "$USE_GNUREGEX" = "yes" ; then USE_GNUREGEX="yes" else AC_TRY_COMPILE([#include #include ],[regex_t t; regcomp(&t,"",0);], USE_GNUREGEX="no", USE_GNUREGEX="yes") fi fi AC_MSG_RESULT($USE_GNUREGEX) if test "$USE_GNUREGEX" = "yes"; then REGEXLIB="-lregex" LIBREGEX="libregex.a" AC_DEFINE(USE_GNUREGEX, 1, [Define if we should use GNU regex]) fi AC_SUBST(REGEXLIB) AC_SUBST(LIBREGEX) AC_REPLACE_FUNCS(\ drand48 \ tempnam \ strerror \ initgroups ) dnl Not cached since people are likely to tune this AC_MSG_CHECKING(Default FD_SETSIZE value) AC_TRY_RUN([ #if HAVE_STDIO_H #include #endif #if HAVE_UNISTD_H #include #endif #if HAVE_SYS_TIME_H #include #endif #if HAVE_SYS_SELECT_H #include #endif #if HAVE_SYS_TYPES_H #include #endif #if HAVE_WINSOCK_H #include #endif #if HAVE_WINSOCK2_H #include #endif main() { FILE *fp = fopen("conftestval", "w"); fprintf (fp, "%d\n", FD_SETSIZE); exit(0); } ], DEFAULT_FD_SETSIZE=`cat conftestval`, DEFAULT_FD_SETSIZE=256, DEFAULT_FD_SETSIZE=256) AC_MSG_RESULT($DEFAULT_FD_SETSIZE) AC_DEFINE_UNQUOTED(DEFAULT_FD_SETSIZE, $DEFAULT_FD_SETSIZE, [Default FD_SETSIZE value]) AC_ARG_WITH(maxfd, [ --with-maxfd=N Override maximum number of filedescriptors. Useful if you build as another user who is not privileged to use the number of filedescriptors you want the resulting binary to support], [ case $withval in [[0-9]]*) SQUID_MAXFD=$withval echo "Maximum filedescriptors set to $SQUID_MAXFD" ;; *) echo "ERROR: Invalid --with-maxfd argument" exit 1 ;; esac ]) if test -z "$SQUID_MAXFD"; then dnl Not cached since people are likely to tune this AC_MSG_CHECKING(Maximum number of filedescriptors we can open) dnl damn! FreeBSD's pthreads breaks dup2(). TLDFLAGS="$LDFLAGS" case $host in i386-unknown-freebsd*) if echo "$LDFLAGS" | grep -q pthread; then LDFLAGS=`echo $LDFLAGS | sed -e "s/-pthread//"` fi esac AC_TRY_RUN([ #include #include #include /* needed on FreeBSD */ #include #include main() { FILE *fp; int i,j; #if defined(__CYGWIN32__) || defined (__CYGWIN__) /* getrlimit and sysconf returns bogous values on cygwin32. * Number of fds is virtually unlimited in cygwin (sys/param.h) * __CYGWIN32__ is deprecated. */ i = NOFILE; #else #if HAVE_SETRLIMIT struct rlimit rl; #if defined(RLIMIT_NOFILE) if (getrlimit(RLIMIT_NOFILE, &rl) < 0) { perror("getrlimit: RLIMIT_NOFILE"); } else { rl.rlim_cur = rl.rlim_max; /* set it to the max */ if (setrlimit(RLIMIT_NOFILE, &rl) < 0) { perror("setrlimit: RLIMIT_NOFILE"); } } #elif defined(RLIMIT_OFILE) if (getrlimit(RLIMIT_OFILE, &rl) < 0) { perror("getrlimit: RLIMIT_OFILE"); } else { rl.rlim_cur = rl.rlim_max; /* set it to the max */ if (setrlimit(RLIMIT_OFILE, &rl) < 0) { perror("setrlimit: RLIMIT_OFILE"); } } #endif /* RLIMIT_NOFILE */ #endif /* HAVE_SETRLIMIT */ /* by starting at 2^14, we will never get higher than 2^15 for SQUID_MAXFD */ i = j = 1<<14; while (j) { j >>= 1; if (dup2(0, i) < 0) { i -= j; } else { close(i); i += j; } } i++; #endif /* IF !DEF CYGWIN */ fp = fopen("conftestval", "w"); fprintf (fp, "%d\n", i & ~0x3F); exit(0); } ], SQUID_MAXFD=`cat conftestval`, SQUID_MAXFD=256, SQUID_MAXFD=256) dnl Microsoft MSVCRT.DLL supports 2048 maximum FDs case "$host_os" in mingw|mingw32) SQUID_MAXFD="2048" ;; esac AC_MSG_RESULT($SQUID_MAXFD) fi # --with-maxfd SQUID_MAXFD AC_DEFINE_UNQUOTED(SQUID_MAXFD, $SQUID_MAXFD, [Maximum number of open filedescriptors]) if test "$SQUID_MAXFD" -lt 512 ; then echo "WARNING: $SQUID_MAXFD may not be enough filedescriptors if your" echo " cache will be very busy. Please see the FAQ page" echo " http://www.squid-cache.org/FAQ/FAQ-11.html#filedescriptors" echo " on how to increase your filedescriptor limit" sleep 10 fi LDFLAGS="$TLDFLAGS" dnl Not cached since people are likely to tune this AC_MSG_CHECKING(Default UDP send buffer size) AC_TRY_RUN([ #include #include #include #if HAVE_SYS_SOCKET_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_WINSOCK_H #include #endif #if HAVE_WINSOCK2_H #include #endif main () { FILE *fp; int fd,val=0,len=sizeof(int); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSADATA wsaData; WSAStartup(2, &wsaData); #endif if ((fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) exit(1); if (getsockopt(fd, SOL_SOCKET, SO_SNDBUF, &val, &len) < 0) exit(1); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSACleanup(); #endif if (val<=0) exit(1); fp = fopen("conftestval", "w"); fprintf (fp, "%d\n", val); exit(0); } ], SQUID_UDP_SO_SNDBUF=`cat conftestval`, SQUID_UDP_SO_SNDBUF=16384, SQUID_UDP_SO_SNDBUF=16384) AC_MSG_RESULT($SQUID_UDP_SO_SNDBUF) AC_DEFINE_UNQUOTED(SQUID_UDP_SO_SNDBUF, $SQUID_UDP_SO_SNDBUF, [UDP send buffer size]) dnl Not cached since people are likely to tune this AC_MSG_CHECKING(Default UDP receive buffer size) AC_TRY_RUN([ #include #include #include #if HAVE_SYS_SOCKET_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_WINSOCK_H #include #endif #if HAVE_WINSOCK2_H #include #endif main () { FILE *fp; int fd,val=0,len=sizeof(int); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSADATA wsaData; WSAStartup(2, &wsaData); #endif if ((fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) exit(1); if (getsockopt(fd, SOL_SOCKET, SO_RCVBUF, &val, &len) < 0) exit(1); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSACleanup(); #endif if (val <= 0) exit(1); fp = fopen("conftestval", "w"); fprintf (fp, "%d\n", val); exit(0); } ], SQUID_UDP_SO_RCVBUF=`cat conftestval`, SQUID_UDP_SO_RCVBUF=16384, SQUID_UDP_SO_RCVBUF=16384) AC_MSG_RESULT($SQUID_UDP_SO_RCVBUF) AC_DEFINE_UNQUOTED(SQUID_UDP_SO_RCVBUF, $SQUID_UDP_SO_RCVBUF, [UDP receive buffer size]) dnl Not cached since people are likely to tune this AC_MSG_CHECKING(Default TCP send buffer size) AC_TRY_RUN([ #include #include #include #if HAVE_SYS_SOCKET_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_WINSOCK_H #include #endif #if HAVE_WINSOCK2_H #include #endif main () { FILE *fp; int fd,val=0,len=sizeof(int); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSADATA wsaData; WSAStartup(2, &wsaData); #endif if ((fd = socket(AF_INET, SOCK_STREAM, 0)) < 0) exit(1); if (getsockopt(fd, SOL_SOCKET, SO_SNDBUF, &val, &len) < 0) exit(1); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSACleanup(); #endif if (val <= 0) exit(1); fp = fopen("conftestval", "w"); fprintf (fp, "%d\n", val); exit(0); } ], SQUID_TCP_SO_SNDBUF=`cat conftestval`, SQUID_TCP_SO_SNDBUF=16384, SQUID_TCP_SO_SNDBUF=16384) AC_MSG_RESULT($SQUID_TCP_SO_SNDBUF) if test $SQUID_TCP_SO_SNDBUF -gt 32768; then echo "Limiting send buffer size to 32K" SQUID_TCP_SO_SNDBUF=32768 fi AC_DEFINE_UNQUOTED(SQUID_TCP_SO_SNDBUF, $SQUID_TCP_SO_SNDBUF, [TCP send buffer size]) dnl Not cached since people are likely to tune this AC_MSG_CHECKING(Default TCP receive buffer size) AC_TRY_RUN([ #include #include #include #if HAVE_SYS_SOCKET_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_WINSOCK_H #include #endif #if HAVE_WINSOCK2_H #include #endif main () { FILE *fp; int fd,val=0,len=sizeof(int); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSADATA wsaData; WSAStartup(2, &wsaData); #endif if ((fd = socket(AF_INET, SOCK_STREAM, 0)) < 0) exit(1); if (getsockopt(fd, SOL_SOCKET, SO_RCVBUF, &val, &len) < 0) exit(1); #if (defined(WIN32) || defined(__WIN32__) || defined(__WIN32)) && !(defined(__CYGWIN32__) || defined(__CYGWIN__)) WSACleanup(); #endif if (val <= 0) exit(1); fp = fopen("conftestval", "w"); fprintf (fp, "%d\n", val); exit(0); } ], SQUID_TCP_SO_RCVBUF=`cat conftestval`, SQUID_TCP_SO_RCVBUF=16384, SQUID_TCP_SO_RCVBUF=16384) AC_MSG_RESULT($SQUID_TCP_SO_RCVBUF) if test $SQUID_TCP_SO_RCVBUF -gt 65535; then echo "Limiting receive buffer size to 64K" SQUID_TCP_SO_RCVBUF=65535 fi AC_DEFINE_UNQUOTED(SQUID_TCP_SO_RCVBUF, $SQUID_TCP_SO_RCVBUF, [TCP receive buffer size]) AC_CACHE_CHECK(if sys_errlist is already defined, ac_cv_needs_sys_errlist, AC_TRY_COMPILE([#include ],[char *s = sys_errlist;], ac_cv_needs_sys_errlist="no", ac_cv_needs_sys_errlist="yes") ) if test "$ac_cv_needs_sys_errlist" = "yes" ; then AC_DEFINE(NEED_SYS_ERRLIST, 1, [If we need to declare sys_errlist[] as external]) fi AC_MSG_CHECKING(if inet_ntoa() actually works) AC_TRY_RUN([ #include #include #include #include #include main () { FILE *fp; struct in_addr in; in.s_addr = inet_addr("1.2.3.4"); fp = fopen("conftestval", "w"); fprintf (fp, "%s\n", inet_ntoa(in)); exit(0); } ], INET_NTOA_RESULT=`cat conftestval`, INET_NTOA_RESULT="broken", INET_NTOA_RESULT="broken") if test "$INET_NTOA_RESULT" = "1.2.3.4" ; then AC_MSG_RESULT("yes") else AC_MSG_RESULT("no") case "$host_os" in mingw|mingw32) echo "Using Win32 resolver instead." ;; *) echo "Will use our own inet_ntoa()." # autoconf-2.13 needs the lines below switched # LIBOBJS="$LIBOBJS inet_ntoa.o" AC_LIBOBJ(inet_ntoa) # echo "WARNING: This looks bad, and probably prevents Squid from working." # echo " If you're on IRIX and using GCC 2.8, you probably need" # echo " to use the IRIX C compiler instead." # sleep 10 ;; esac fi if test "$ac_cv_header_sys_statvfs_h" = "yes" ; then AC_MSG_CHECKING(for working statvfs() interface) AC_TRY_COMPILE([ #include #include #include #include ], [ struct statvfs sfs; fsblkcnt_t blocks; fsfilcnt_t files; blocks = sfs.f_blocks = sfs.f_bfree = sfs.f_frsize = 0; files = sfs.f_files = sfs.f_ffree = 0; statvfs("/tmp", &sfs); ], ac_cv_func_statvfs=yes, ac_cv_func_statvfs=no) AC_MSG_RESULT($ac_cv_func_statvfs) if test "$ac_cv_func_statvfs" = "yes" ; then AC_DEFINE(HAVE_STATVFS, 1, [If your system has statvfs(), and if it actually works!]) fi fi AC_CACHE_CHECK(for _res.nsaddr_list, ac_cv_have_res_nsaddr_list, AC_TRY_COMPILE([ #if HAVE_SYS_TYPES_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_ARPA_INET_H #include #endif #if HAVE_ARPA_NAMESER_H #include #endif #if HAVE_RESOLV_H #include #endif ], [_res.nsaddr_list[[0]];], ac_cv_have_res_nsaddr_list="yes", ac_cv_have_res_nsaddr_list="no")) if test $ac_cv_have_res_nsaddr_list = "yes" ; then AC_DEFINE(HAVE_RES_NSADDR_LIST, 1, [If _res structure has nsaddr_list member]) fi if test $ac_cv_have_res_nsaddr_list = "no" ; then AC_CACHE_CHECK(for _res.ns_list, ac_cv_have_res_ns_list, AC_TRY_COMPILE([ #if HAVE_SYS_TYPES_H #include #endif #if HAVE_NETINET_IN_H #include #endif #if HAVE_ARPA_INET_H #include #endif #if HAVE_ARPA_NAMESER_H #include #endif #if HAVE_RESOLV_H #include #endif ], [_res.ns_list[[0]].addr;], ac_cv_have_res_ns_list="yes", ac_cv_have_res_ns_list="no")) if test $ac_cv_have_res_ns_list = "yes" ; then AC_DEFINE(HAVE_RES_NS_LIST, 1, [If _res structure has ns_list member]) fi fi dnl Need the debugging version of malloc if available XTRA_OBJS='' if test "$ac_cv_lib_malloc_main" = "yes" ; then if test -r /usr/lib/debug/malloc.o ; then XTRA_OBJS="$XTRA_OBJS /usr/lib/debug/malloc.o" fi if test -r /usr/lib/debug/mallocmap.o ; then XTRA_OBJS="$XTRA_OBJS /usr/lib/debug/mallocmap.o" fi fi AC_SUBST(XTRA_OBJS) if test -z "$XTRA_LIBS"; then XTRA_LIBS="$LIBS" dnl minor cleanup XTRA_LIBS=`echo $XTRA_LIBS | sed -e "s/ */ /g"` LIBS='' fi AC_SUBST(XTRA_LIBS) dnl Clean up after OSF/1 core dump bug rm -f core dnl FS_MAKEFILES="" dnl for fs in $STORE_MODULES none; do dnl if test $fs != none; then dnl FS_MAKEFILES="$FS_MAKEFILES ./src/fs/$fs/Makefile" dnl fi dnl done dnl REPL_MAKEFILES="" dnl for repl in $REPL_POLICIES none; do dnl if test $repl != none; then dnl REPL_MAKEFILES="$REPL_MAKEFILES ./src/repl/$repl/Makefile" dnl fi dnl done dnl This could actually be used to find all the Makefiles.. dnl One of Automake's limitations is that it needs to know all the created makefiles. dnl AUTH_MAKEFILES="" dnl for auth in `find $srcdir/src/auth -type d -print`; do dnl if test -f $auth/Makefile.in; then dnl dir=`echo $auth | sed -e "s|^$srcdir/||"` dnl AUTH_MAKEFILES="$AUTH_MAKEFILES ./$dir/Makefile" dnl fi dnl done AC_OUTPUT([\ Makefile \ lib/Makefile \ scripts/Makefile \ scripts/RunCache \ src/Makefile \ src/fs/Makefile \ src/repl/Makefile \ src/auth/Makefile \ contrib/Makefile \ snmplib/Makefile \ icons/Makefile \ errors/Makefile \ doc/Makefile \ helpers/Makefile \ helpers/basic_auth/Makefile \ helpers/basic_auth/LDAP/Makefile \ helpers/basic_auth/MSNT/Makefile \ helpers/basic_auth/NCSA/Makefile \ helpers/basic_auth/PAM/Makefile \ helpers/basic_auth/SMB/Makefile \ helpers/basic_auth/YP/Makefile \ helpers/basic_auth/getpwnam/Makefile \ helpers/basic_auth/mswin_sspi/Makefile \ helpers/basic_auth/multi-domain-NTLM/Makefile \ helpers/basic_auth/SASL/Makefile \ helpers/basic_auth/POP3/Makefile \ helpers/basic_auth/DB/Makefile \ helpers/basic_auth/squid_radius_auth/Makefile \ helpers/digest_auth/Makefile \ helpers/digest_auth/password/Makefile \ helpers/digest_auth/ldap/Makefile \ helpers/digest_auth/eDirectory/Makefile \ helpers/ntlm_auth/Makefile \ helpers/ntlm_auth/fakeauth/Makefile \ helpers/ntlm_auth/mswin_sspi/Makefile \ helpers/ntlm_auth/no_check/Makefile \ helpers/ntlm_auth/SMB/Makefile \ helpers/ntlm_auth/SMB/smbval/Makefile \ helpers/negotiate_auth/Makefile \ helpers/negotiate_auth/mswin_sspi/Makefile \ helpers/negotiate_auth/squid_kerb_auth/Makefile \ helpers/external_acl/Makefile \ helpers/external_acl/ip_user/Makefile \ helpers/external_acl/ldap_group/Makefile \ helpers/external_acl/mswin_ad_group/Makefile \ helpers/external_acl/mswin_lm_group/Makefile \ helpers/external_acl/session/Makefile \ helpers/external_acl/unix_group/Makefile \ helpers/external_acl/wbinfo_group/Makefile \ tools/Makefile \ ])