# packages

pkgId: a5f4fe2cc334be068111c89dbf851b548fea4baa
name: mpich-ethernet-gnu
arch: i386
version: 1.2.7
epoch: 0
release: 1
summary: A Portable Implementation of MPI built with the GNU Compilers
rpm_license: freely distributable
rpm_group: Development/Libraries
rpm_buildhost: rocks-157.sdsc.edu
rpm_sourcerpm: mpich-ethernet-gnu-1.2.7-1.src.rpm
location_href: mpich-ethernet-gnu-1.2.7-1.i386.rpm
checksum_type: sha
description:
  MPICH is a freely available, portable implementation of MPI (Message Passing
  Interface), the Standard for message-passing libraries. This version is
  configured to use ssh instead of rsh when using mpirun. This is the ethernet
  version of MPICH.


pkgId: ffbaae4832c3b4399830aa1983b38293c0caedde
name: memtest86
arch: i386
version: 3.2
epoch: 0
release: 1
summary: A stand alone memory test for i386 architecture systems
url: http://www.memtest86.com
rpm_license: GPL
rpm_group: Fermi
rpm_buildhost: fnpt119.fnal.gov
rpm_sourcerpm: memtest86-3.2-1.src.rpm
rpm_packager: Steven Timm <timm@fnal.gov>
location_href: memtest86-3.2-1.i386.rpm
checksum_type: sha
description:
  Memtest86 is maintained by Eric Biederman, http://www.memtest86.com.
  It can be run under Windows or Linux, or most commonly as a standalone
  executable.  This RPM packages it so that it can be added
  to LILO or GRUB so it is an option on the boot menu and it is not necessary
  to have a floppy disk to start the memtest.  There
  are six different RPMS, one for each of four serial console speeds,
  one with no console support at all, and one which does not
  do anything in the %post.  Since memtest86 rpm
  attempts to modify /etc/lilo.conf and /boot/grub/grub.conf,
  it must either be installed in %post, after the bootloader is
  installed, or the script add_memtest.pl must be invoked again in the
  post section.  Note that all of the 5 binaries are actually included
  in each rpm to allow for easy changing of speeds after the rpm
  is installed.


pkgId: 9999bd956b93ef34635356160f938732614961d5
name: netlog
arch: i386
version: 1
epoch: 0
release: 1
summary: Install netlog script to log network errors once per hour
rpm_license: GPL
rpm_group: Fermi
rpm_buildhost: fnpcb.fnal.gov
rpm_sourcerpm: netlog-1-1.src.rpm
rpm_packager: Steve Timm <timm@fnal.gov>
location_href: netlog-1-1.i386.rpm
checksum_type: sha
description:
  Netlog installs a script into cron that puts the contents of the
  /proc/net/dev counters into /var/log/netlog once an hour. the file
  is rotated by means of /etc/logrotate.d/netlog


pkgId: c6f6e78505998f49ff38d0cb99333a6892da23a4
name: smartcron
arch: noarch
version: 5
epoch: 0
release: 2
summary: Install smartcron script to run short smartctl test on each disk once per day at cron.daily
rpm_license: GPL
rpm_group: Fermi
rpm_buildhost: fnpcd.fnal.gov
rpm_sourcerpm: smartcron-5-2.src.rpm
rpm_packager: Steve Timm <timm@fnal.gov>
location_href: smartcron-5-2.noarch.rpm
checksum_type: sha
description:
  Smartcron installs the script smartctl_all into /etc/cron.daily.
  Once a day it detects all IDE drives that are on the system and
  runs the short smartctl test on each one of them in turn.
  Output goes to /var/log/smartctl_hd? and /var/log/sc_?


pkgId: ab7e565305e13bb3eb7791c8552844cd95a075eb
name: zz_remove_message
arch: noarch
version: 1.0
epoch: 0
release: 4
summary: Script to remove /boot/message
rpm_license: GPL
rpm_group: Fermi
rpm_buildhost: fnpcb.fnal.gov
rpm_sourcerpm: zz_remove_message-1.0-4.src.rpm
rpm_packager: Steven Timm <timm@fnal.gov>
location_href: zz_remove_message-1.0-4.noarch.rpm
checksum_type: sha
description:
  This edits lilo.conf to remove the line message=/boot/message.
  We remove this line because it makes a mess on the serial console
  if it comes up.  If this rpm is uninstalled we'll put the line back.
  It also edits grub.conf to comment out the splashimage,
  for the same reason.  Only the bootloader that is currently
  active has its file modified.  This rpm must be installed
  during the post install, after the boot loader is already configured.


