Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 22595
Filename: ahcpd_0.53-3_x86_64.ipk
Size: 23479
SHA256sum: feff0c1b53e957b92909fd67472cfb8295fc96ece8e76f0a140971b5e8bf77d7
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: x86_64
Installed-Size: 26012
Filename: alfred_2023.3-1_x86_64.ipk
Size: 27224
SHA256sum: f7b2aa7d6ad7496442bb5efeaf100d2bb6ab95090f13f3b921782beb114586fb
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: x86_64
Installed-Size: 3758
Filename: babel-pinger_0.1-1_x86_64.ipk
Size: 4556
SHA256sum: 4cbd8483744defc0dd29f24d2f9b41e5faf38f9942ea0803e6851c45064d7f58
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 68065
Filename: babeld_1.13.1-1_x86_64.ipk
Size: 69268
SHA256sum: ed18e6a203345c7d52bf3c65f6c6dbd2c95cdb831d25341d514aedced7a17a0f
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 45905
Filename: batctl-default_2023.3-1_x86_64.ipk
Size: 46848
SHA256sum: 4b73ce7a0a2b9f7b54b29b0e1139b01dee239f922ba200eb3bee46861c7f21e2
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 53208
Filename: batctl-full_2023.3-1_x86_64.ipk
Size: 54262
SHA256sum: 3d050a00645bf1d09bcd011afcd4c699bd347969235bd1d6e0eb23a7ccca18b6
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: x86_64
Installed-Size: 15678
Filename: batctl-tiny_2023.3-1_x86_64.ipk
Size: 16637
SHA256sum: 704d1615b8530b067a77c7717f6e84f81afaf10ab59ef6d14b07a6f17579d06b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: x86_64
Installed-Size: 43885
Filename: batmand_1440-1_x86_64.ipk
Size: 44762
SHA256sum: c01e7cb93ff3d602ba2a4f040f904f071dd5ed800797100ae53c8a7f4177ae36
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 394043
Filename: bird2_2.14-1_x86_64.ipk
Size: 393482
SHA256sum: ea7704786daf2ba9f8746407fcd2c21267798aea3770744082bec10f3959a76e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 8806
Filename: bird2c_2.14-1_x86_64.ipk
Size: 9944
SHA256sum: 8807751de6847fca2d1d1323ba6a40ceabbaf821eccb3c6394dbd5cfb2e21a13
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 7593
Filename: bird2cl_2.14-1_x86_64.ipk
Size: 8665
SHA256sum: 5d2ec81d7c13a53836b25b74961ec0db295cb55cbde75266839f82667c1a2af1
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 3972
Filename: bmx7-iwinfo_7.1.1-5_x86_64.ipk
Size: 4747
SHA256sum: 836cfa29c522f2bd244dedc904f1b61faeb341317a843b873277eea9d4ae573d
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 7729
Filename: bmx7-json_7.1.1-5_x86_64.ipk
Size: 8507
SHA256sum: 6f9572006b70c17f037bf830db1919dcf26057beea2fb70505a17ac4c6303c16
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 5273
Filename: bmx7-sms_7.1.1-5_x86_64.ipk
Size: 6010
SHA256sum: 198a588f428c0b8e4ef83266744d9527c5a146cf25bca01c8dd699d03dce4768
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 9402
Filename: bmx7-table_7.1.1-5_x86_64.ipk
Size: 10195
SHA256sum: ac88b59df0e5318ddb2c20c417d5a58d2a71ee51779abee6fcc2590b526838c0
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 4762
Filename: bmx7-topology_7.1.1-5_x86_64.ipk
Size: 5503
SHA256sum: bc9fc6c7561a7affb96f7167183f906e58137bb7b987cee623e1c041d7c2966b
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 25721
Filename: bmx7-tun_7.1.1-5_x86_64.ipk
Size: 26449
SHA256sum: 154ffe3719ef1c79be67ced53b4f15cc627e7b548d38e3853ded7f3b17ff239b
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 8560
Filename: bmx7-uci-config_7.1.1-5_x86_64.ipk
Size: 9367
SHA256sum: e79c9a613b80e2906f0a25e68ad865d29b50539d39dc21da13a5cce7677b3546
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 171889
Filename: bmx7_7.1.1-5_x86_64.ipk
Size: 172774
SHA256sum: 1b9f454d74acaa18945ea8c21d3e4593b6d7d4030e3abecdaa85bd156e76e0d6
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 330369
Filename: cjdns-tests_v21.1-5_x86_64.ipk
Size: 331075
SHA256sum: 036a2597c1e63f449662f0710018acb4cfbd292d0c9638f4f81e71eb5bffa4e7
Description:  cjdns test cases

Package: cjdns
Version: v21.1-5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 384115
Filename: cjdns_v21.1-5_x86_64.ipk
Size: 385088
SHA256sum: 971ad28e1b8d2b908238d8daa6b72c7a9a6bd52fdceb1f1123feef0622b6c0e1
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_x86_64.ipk
Size: 1391
SHA256sum: c63f4da7d13b9b871093a8c61308918b5605f1543090135fd296f790b314ad46
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_x86_64.ipk
Size: 932
SHA256sum: 47e7cd3b32db1cead62932882300820cad1afe0a6b2c1fcd6c6580e82c89be54
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_x86_64.ipk
Size: 906
SHA256sum: 652ff8d0da03171d243de9bc1f32d82d27dd25d0dcf0bdf8744b10ba4123f6d9
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 103251
Filename: hnetd-nossl_2018-12-21-c4376661-1_x86_64.ipk
Size: 104324
SHA256sum: 05b7419b5f26d2470eadfcfdd02e921f71b82c3be8216ccc86cf5d41285ec4e5
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 114244
Filename: hnetd-openssl_2018-12-21-c4376661-1_x86_64.ipk
Size: 115301
SHA256sum: 22ab8006ab95eea7421fbf76bfd6b07a4224843dc1569a848f9c83a193264e56
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: x86_64
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_x86_64.ipk
Size: 6558
SHA256sum: a7f07e43df3d11dbac6f6ffd57972660128e7726b3d723dc7c16699538e259d0
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: x86_64
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_x86_64.ipk
Size: 57613
SHA256sum: d4cfb042aef6a137d36a6b00f419763a8af442c301fd209cd6d35693ccb145fc
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 130487
Filename: mcproxy_2017-08-24-93b5ace4-9_x86_64.ipk
Size: 131574
SHA256sum: 806287cb2edc20f18b78dc3e35950cc4bf7030095beaf3233b157ea361b43bab
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 6393
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_x86_64.ipk
Size: 7451
SHA256sum: ced93b1c102f173e81032886df9d5ba6a8ecd90c0c07e9bdd0a23ab289218df3
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 33103
Filename: ndppd_0.2.5-2_x86_64.ipk
Size: 34160
SHA256sum: 22a72fda08444ea6a1416dd16c03afbc904cda6228c964442b41c4e0d7f92be8
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 47547
Filename: nodogsplash_5.0.2-1_x86_64.ipk
Size: 48582
SHA256sum: c9dd74d865881de529da3bae8e2d9ee4095d78acb45d195a55d0fb9187c3792b
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 10997
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_x86_64.ipk
Size: 11814
SHA256sum: a6586bcfb079dde99712b7c8c4cc7643425aae86a158607b1f562efb6b012571
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2010
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 2757
SHA256sum: 000989aa6bbc8b622a6f8564b0b4c6397e9b66d121f3c2e12c2a6cfb7a706788
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 12292
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 13039
SHA256sum: c7103dfcb2b20ae709332a4196e0f8914d4ac2d8090bfb57d7f290e2b29c3fc8
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 3705
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 4466
SHA256sum: b41de1b147f98777b8952eae3f502cd37e4e93f1340cb02cce5e1a26ed16224d
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2319
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 3072
SHA256sum: f4234e67f5539776bf620e8f9be802753b5f6f55fb68f8bf46f206cd39a2cae3
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 4098
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 4847
SHA256sum: 332d0d5d9a9fab61d415e473dee22a3a468822ec1b2a1b1cdb9b778457e6353e
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2552
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 3297
SHA256sum: eff8695b8b61788a8d3823adbff702ce151b9861ce71993a49876c8599511842
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 30766
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 31549
SHA256sum: dbbba38293d6144065773735ca832fc6145b591da86a04ed058d6cf8c1e60577
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 22498
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 23232
SHA256sum: 9b560ee75ec436c4e824626d6f3b152e8efe24128c0b7ab5124cbe4774200c68
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 9231
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 9985
SHA256sum: 2c438ec0d9cf8923ceae959734b949885a2f30f253df23b1a8c7ac52954f5867
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 10974
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 11727
SHA256sum: 5f76111e05181e471d7948a2f6b48c2339fd62258bbac89f25023fdb3ddf88af
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 13142
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 13893
SHA256sum: 704b11a3840009bebd59b5073b2f8e1be0252bad028140fafcf5c0bc9a750b8a
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 8661
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 9439
SHA256sum: a46426b0699447c6c3a1bc72f7e8f3330ef42fc27d4a9507f0cb33081da3441c
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 2925
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 3685
SHA256sum: 39615333e2c4af17dbbbaebc273b47ddd8b876a2fbcc6d55b363becd7e1a58af
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 62359
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 63130
SHA256sum: bb7d77c206045aee4cd6cf5cace7fb39ac3426c40f972a05a4259230950e311f
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 6391
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 7138
SHA256sum: 7d35573d73e6ed08b6d995d84bcc7ea93a83855316c53bd98efa3c73836cdb77
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 9924
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 10716
SHA256sum: 2b22a9df6699786761e527e6f158f79d75151a110344969b9b68ce0ab0dc0f39
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 4497
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 5305
SHA256sum: 8165c25ae4824ac803ced05147c48f869bf01f4ded427f1aa9a1bd279934f39d
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 14601
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 15339
SHA256sum: 704aeb1226b706968de8cc3c62a4acc9b6b2919349ef44a6ebabde867b592cbb
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 1685
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 2421
SHA256sum: b500744addbd53417a7a89dc34389d402173ea45ed01885201795baf83a72e37
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 1923
SHA256sum: 2c6e8c3b0b34db0f671003569382a221cbe01c3d2dd0849ab203700ec2ab5a4f
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: x86_64
Installed-Size: 139909
Filename: olsrd_2023-06-12-a9b3f1ac-1_x86_64.ipk
Size: 140867
SHA256sum: 47c57d0a30eb317d0ff367ab14e9f4fd3e335de26526e98eafa5ecdabb55ba66
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 182179
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_x86_64.ipk
Size: 183123
SHA256sum: 57196f8441e95db240b1428a15647295e8a306336a2688e7e8568809560dc339
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 176883
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_x86_64.ipk
Size: 177764
SHA256sum: dca9263661e649e29647e80ac89a62a24ac7e4d5c6c54fcbf8c0304a1957b72f
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: x86_64
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk
Size: 2275
SHA256sum: 66f7eb94b68e864166a93d86cdbfc1345fecf58d4b32a95b8e2777a7386993e2
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: x86_64
Installed-Size: 258859
Filename: oonf-olsrd2_2022-08-25-1cec9b21_x86_64.ipk
Size: 259695
SHA256sum: 9ed4e504b19b8d9a1d563219753f3e30cf9fd0aa1a00f2d7e16f03a7323cb9eb
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: x86_64
Installed-Size: 159156
Filename: opennds_10.2.0-1_x86_64.ipk
Size: 159352
SHA256sum: 0e155e3de6ae90552d1438cfc3bbfda0e741c2cb6de37fa8e06a51496bdd2ba1
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: x86_64
Installed-Size: 88441
Filename: pimbd_2018-06-19-dbf4e591-4_x86_64.ipk
Size: 89390
SHA256sum: d9df8223deb01d059dd44eb3674b2066a250518829bdc8e29c8697ead3bc720e
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: x86_64
Installed-Size: 30257
Filename: prince_0.4-3_x86_64.ipk
Size: 31269
SHA256sum: 06bfcc9eb8265b56a003673c6a5af8d3cf9cd5ccbd13f60ff86386c47b648725
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 10817
Filename: vis_2013-04-07-7710cce4-9_x86_64.ipk
Size: 11619
SHA256sum: 29c666f81f6132eeeb0d4cb766508f9bf79274f47f6d13dad30b1969a99be47d
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: x86_64
Installed-Size: 8787
Filename: zonestitcher_2020-05-22-0dfef1eb-3_x86_64.ipk
Size: 9630
SHA256sum: 6a7066d56e89bead133ef8be6dc1520a3bd0184709e40aef2d63a1a0d11d25bc
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.