Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: riscv64_riscv64
Installed-Size: 22130
Filename: ahcpd_0.53-3_riscv64_riscv64.ipk
Size: 22996
SHA256sum: 79fa9300d577b29c3ca655b10284b383bcfd8eb3c6680f6a2ae2f1d4764d85fc
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: riscv64_riscv64
Installed-Size: 25812
Filename: alfred_2023.3-1_riscv64_riscv64.ipk
Size: 26898
SHA256sum: 07b2f429bd1803a20128458003ad767e470cf03063c6b3f31e29000546b1f4e4
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: riscv64_riscv64
Installed-Size: 3865
Filename: babel-pinger_0.1-1_riscv64_riscv64.ipk
Size: 4652
SHA256sum: f78b9cd49803add1ca2064a5c2e88149e7377f882bd42dc3524399ec9167e81c
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: riscv64_riscv64
Installed-Size: 64918
Filename: babeld_1.13.1-1_riscv64_riscv64.ipk
Size: 66028
SHA256sum: 0bd5fa0aef7ffd8230fa5835b29dbdaa2a8de00b0e47ce00cf9881e1e8c6da2f
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: riscv64_riscv64
Installed-Size: 41492
Filename: batctl-default_2023.3-1_riscv64_riscv64.ipk
Size: 42517
SHA256sum: c621c31346337db03088f6a70643dedab40e65c9401c9c7cbc4797b7c53670cd
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: riscv64_riscv64
Installed-Size: 47797
Filename: batctl-full_2023.3-1_riscv64_riscv64.ipk
Size: 48851
SHA256sum: f12089e5105cb629801eccd40fbd3e8015c7998d25bfa3f5d4efa5c421b7f03c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: riscv64_riscv64
Installed-Size: 13815
Filename: batctl-tiny_2023.3-1_riscv64_riscv64.ipk
Size: 14761
SHA256sum: 2309f64c6060e11318c367a86b305dd16ed6bcfb46c1e471fdc90d8345bdc7ca
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: riscv64_riscv64
Installed-Size: 40169
Filename: batmand_1440-1_riscv64_riscv64.ipk
Size: 40980
SHA256sum: 5f0218c908d473d4a24ce4470724b71e4ee6569299d7b70a7ea6da155f546fb0
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 378266
Filename: bird2_2.14-1_riscv64_riscv64.ipk
Size: 377208
SHA256sum: 6d482292e2e65fb09054a5862712419b40a2050ca27589c4241f1abd4f67ea05
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 8995
Filename: bird2c_2.14-1_riscv64_riscv64.ipk
Size: 10084
SHA256sum: fef67ff50091ee566dd018d26d236e03c203f8bce72a92d3548835687b3e0123
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 7670
Filename: bird2cl_2.14-1_riscv64_riscv64.ipk
Size: 8718
SHA256sum: 45ee3243d8490bba8f1da82fa3c268ae1e3ac215b0b23fc1d358bb0f2d2ae463
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 3675
Filename: bmx7-iwinfo_7.1.1-5_riscv64_riscv64.ipk
Size: 4438
SHA256sum: 3894a5cca336254e1071210fb9ebf24ed5e0f34b2012214831a4bf934214a0f8
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 7406
Filename: bmx7-json_7.1.1-5_riscv64_riscv64.ipk
Size: 8148
SHA256sum: 24ba5ec80227b51b4baada3dc30b1ef87191ba848ffd9b0b0f8f2857c165a44f
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 5348
Filename: bmx7-sms_7.1.1-5_riscv64_riscv64.ipk
Size: 6063
SHA256sum: 2658a62305377d24299349a83b60fc9700e321e91045b8774e48ddf7ff523dc5
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 9036
Filename: bmx7-table_7.1.1-5_riscv64_riscv64.ipk
Size: 9799
SHA256sum: 3f5611cae35773e853ca0f55f5922376bbe842aee0ef3c5bfc136b5eefa08d10
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 4670
Filename: bmx7-topology_7.1.1-5_riscv64_riscv64.ipk
Size: 5408
SHA256sum: ab5be58c66d56c7bfc7bfc9507f20510ebd1c88237dca94593a4e3f5387cdde0
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 24912
Filename: bmx7-tun_7.1.1-5_riscv64_riscv64.ipk
Size: 25596
SHA256sum: 2b0d00b7a1471d97b8b9e8f306989b4a7a84546c938dcea17a651933128f5982
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 7663
Filename: bmx7-uci-config_7.1.1-5_riscv64_riscv64.ipk
Size: 8481
SHA256sum: 66d053c1ee61d48ba71337829bfee753c62999a5dbf27a5571a17eb9044a81a6
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 159477
Filename: bmx7_7.1.1-5_riscv64_riscv64.ipk
Size: 160213
SHA256sum: 508f68a1ef45c7468828ef52675a0ae43b896d1b4745e39b95670f774c19ffb3
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_riscv64_riscv64.ipk
Size: 1391
SHA256sum: 71fe36258c090d7dc20b6c3e1a5993344686d4bc3373c5a37ad41a081569aeb8
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_riscv64_riscv64.ipk
Size: 929
SHA256sum: 8b4d192e24defb84386c822e1340fd94ad5072cba1d401286a1999e7c4067fa8
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_riscv64_riscv64.ipk
Size: 920
SHA256sum: ce320b39a7f89cf9b9c25a425648403806032e14272b3b2fe29a50fbe3182b3d
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 92471
Filename: hnetd-nossl_2018-12-21-c4376661-1_riscv64_riscv64.ipk
Size: 93543
SHA256sum: 74efc3acfeeceee11b813762b0ec47be78fb026b74a0b38f994d1f45c2b153e2
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 101570
Filename: hnetd-openssl_2018-12-21-c4376661-1_riscv64_riscv64.ipk
Size: 102628
SHA256sum: 998d020fc6d1d9e4b814104915fe09560a15c869cb6d5566ead83b46f23ff7b9
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: riscv64_riscv64
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_riscv64_riscv64.ipk
Size: 6562
SHA256sum: fb6c09902c404f58aaea181922086127022550474ff575bf1afb824722c50e7b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: riscv64_riscv64
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_riscv64_riscv64.ipk
Size: 57616
SHA256sum: 549e7cb03246b9c1dc00090a7614ac35a076f4bb43449f1bfb3fb66d24e8e6b4
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 131345
Filename: mcproxy_2017-08-24-93b5ace4-9_riscv64_riscv64.ipk
Size: 132276
SHA256sum: f2b5c3ec56ea680ebe4cfa694c41b449d5489c50466f8f442e6ab9f7c447e191
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 6378
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_riscv64_riscv64.ipk
Size: 7424
SHA256sum: 49f81b0892b32f4e99efb61c43157fed5b0b45f51be944d50fd6de73fdb60fb3
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 33938
Filename: ndppd_0.2.5-2_riscv64_riscv64.ipk
Size: 34932
SHA256sum: d0f1b01f1fdf3216f43d747171b99839623d178b72d37c30409babc46b0574ee
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 46891
Filename: nodogsplash_5.0.2-1_riscv64_riscv64.ipk
Size: 47834
SHA256sum: d65f73ca2725955ee3709649da951bcc737b862d753e2334a8756fa35cab4b9b
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 10937
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_riscv64_riscv64.ipk
Size: 11768
SHA256sum: 67581d0ece4b701d1fb6d268d8cdc1b78315a153c6ef25ede832c87dbe340480
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 1931
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 2703
SHA256sum: cf780dc5ca1804d6f5c0e46d10ed4457401831396aa95d61de60d68c9e6abcb2
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 11771
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 12532
SHA256sum: 9ac81feead4959847ca5192ea4297c8b85ab029ffa6fba642e926ad75f2f41af
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 3684
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 4424
SHA256sum: bcd45031208dd0f986c792341123620add664b1a2f0063637bb5842e3a4aa697
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 2328
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 3074
SHA256sum: c25e601ace05fc9f6f1f12c4f93461a7d1023c8d47a6b65b54aa83893ff72606
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 3880
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 4626
SHA256sum: d27ec0a9a97be082218850e944c1135c40339a09424bc8abb7502b8b9a6380e6
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 2450
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 3186
SHA256sum: a838351db5f21213d550f8987ba1c68d32bff942908585d32a891a581c27c7bd
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 31054
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 31823
SHA256sum: 93aa9527d61de97a8f2f1eede1a2740fc4371ee51905cf672d9211b099bca4f6
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 21484
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 22260
SHA256sum: db83cf12dab81e42c2d197eaba7c7b3a41ed326fcce1390561059fb37d6e3a50
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 8732
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 9471
SHA256sum: e4759bd34fbc8fbe32f15a060a9714127d89715b9d5ed52ca09f97146fc93846
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 10550
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 11302
SHA256sum: 76499bce010dbf556a83bd02db68d8b74ffe485336cd98ae3749b738cf748fb2
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 12099
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 12862
SHA256sum: 674fc39ac88ae204523176bdf886eb99d79fea70b79e807dc6d5d27fa1471e48
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 8161
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 8937
SHA256sum: 0da16db93b75f3ebffc835352199d0e2f244d404aa7c9f630f485a3b7348b247
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 2777
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 3523
SHA256sum: 2181f4be6fd8c057b1acd2e908cf45788d4dd3edcec23b1441e649099a099a71
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 56921
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 57553
SHA256sum: 2c726370f58d6e950d003545b9e7601c528642f0f30c246e3de9b21c43613bfc
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 5992
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 6718
SHA256sum: dbab70fe975cfabf9434f71edb9c8e1c580fb7636fe55c11f636ccc61096b8f4
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 11054
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 11856
SHA256sum: cbdebc2e2d0482c1c4d4a0e7159ec396628bc701431060b8c8460cf020a57818
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 4018
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 4808
SHA256sum: 057163bec8000c2d6d8e289b9994f65adab7fc306939f1fb639f1c2b4065e764
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 13731
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 14437
SHA256sum: 7453e24f2ca3f0d044aa6314a26cc504183ea9b2435bb08573ef51bd7fd101f9
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 1618
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 2365
SHA256sum: 9397fe8f918f8ef371d0cbce769a1c6ca4e628372b179080186dff4f15b01d2b
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 1925
SHA256sum: 34a3fbd3421ab4d82193db1d7ad6cb3d172c9eff16152c2be5e20e3eb23dc6ae
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: riscv64_riscv64
Installed-Size: 131075
Filename: olsrd_2023-06-12-a9b3f1ac-1_riscv64_riscv64.ipk
Size: 131904
SHA256sum: cd940de498a2a4adedc28243565456ada9ce655102695f75c9811ce37877ffb4
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: riscv64_riscv64
Installed-Size: 152526
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_riscv64_riscv64.ipk
Size: 153379
SHA256sum: c663e496775ee6b8782bc7fc081e585503eee289b88349f3e5d1a843437efad6
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: riscv64_riscv64
Installed-Size: 148842
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_riscv64_riscv64.ipk
Size: 149609
SHA256sum: 8e4925c804e7b623c8acd9ea0c77e1b7030843fa34cdb7043359cd546f0bfece
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: riscv64_riscv64
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_riscv64_riscv64.ipk
Size: 2279
SHA256sum: dd05e0e2e368e20753f52cb8cc479d9a9ad6afdd64558c0dcb13a2b7b143db45
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: riscv64_riscv64
Installed-Size: 221403
Filename: oonf-olsrd2_2022-08-25-1cec9b21_riscv64_riscv64.ipk
Size: 222233
SHA256sum: a709f92fb25821e8e9098c43829748430c9c526b2eaa4ad8ce8a05ce01b862c4
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: riscv64_riscv64
Installed-Size: 157923
Filename: opennds_10.2.0-1_riscv64_riscv64.ipk
Size: 157986
SHA256sum: 85203ac65ac8803ac6bbe7918e93806dca7a57c03f2ab5776f65e9b2c67f1bf7
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: riscv64_riscv64
Installed-Size: 79879
Filename: pimbd_2018-06-19-dbf4e591-4_riscv64_riscv64.ipk
Size: 80782
SHA256sum: 91f26b912404015d5ab9bc977f5c817dcad396689e31da2d9506ab03ecbc668c
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: riscv64_riscv64
Installed-Size: 26093
Filename: prince_0.4-3_riscv64_riscv64.ipk
Size: 27010
SHA256sum: 1f98aaa75fb74743813842c123ebd5da63c1eb8c9bf2f1f6ffbba7b8c4ba1e23
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 10429
Filename: vis_2013-04-07-7710cce4-9_riscv64_riscv64.ipk
Size: 11215
SHA256sum: ad4242b3649d202b7f0d07d0a7e34cd78ba1aa8e634d1e2385091e4ff1527d53
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: riscv64_riscv64
Installed-Size: 8822
Filename: zonestitcher_2020-05-22-0dfef1eb-3_riscv64_riscv64.ipk
Size: 9671
SHA256sum: 5e3d539f545a59422cff0694f03f7fd204cdbefc5024664c8b5ae7c8b08c3b35
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.