Package: ahcpd Version: 0.53-3 Depends: libc, ip, librt License: MIT Section: net Architecture: powerpc_8548 Installed-Size: 26821 Filename: ahcpd_0.53-3_powerpc_8548.ipk Size: 27628 SHA256sum: f7f8e222374839b121baadf9074fe16ad0c775a102b90227f1fe734be8a33864 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2023.3-1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net Architecture: powerpc_8548 Installed-Size: 30287 Filename: alfred_2023.3-1_powerpc_8548.ipk Size: 31229 SHA256sum: a8f99fc5aac14b92ce61db428297b2883c3cc1983c7f3365ce80bd1c08aac7f9 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-1 Depends: libc, librt Section: net Architecture: powerpc_8548 Installed-Size: 4424 Filename: babel-pinger_0.1-1_powerpc_8548.ipk Size: 5079 SHA256sum: 8e55d38762fc2abb2ce4a06b15df6948468b2fb62cb4a45db36e5735db07c03c Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-1 Depends: libc, libubus20231128, libubox202312041 License: MIT Section: net Architecture: powerpc_8548 Installed-Size: 77169 Filename: babeld_1.13.1-1_powerpc_8548.ipk Size: 77993 SHA256sum: 9089fad281d3ead4160c5938e0c85cfa4d5f69b4fa2ec9983ed8e10ef680e19d Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2023.3-1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net Architecture: powerpc_8548 Installed-Size: 48409 Filename: batctl-default_2023.3-1_powerpc_8548.ipk Size: 49150 SHA256sum: 3b304fdacab77e985786700e564d478cfa72ce920db6a310741055063db4a512 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2023.3 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2023.3-1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net Architecture: powerpc_8548 Installed-Size: 56892 Filename: batctl-full_2023.3-1_powerpc_8548.ipk Size: 57496 SHA256sum: a5c49e053ec13193ff24c769a633d545a16ea3fb33366870be5b7b2bcf93d79d Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2023.3 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2023.3-1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net Architecture: powerpc_8548 Installed-Size: 16664 Filename: batctl-tiny_2023.3-1_powerpc_8548.ipk Size: 17607 SHA256sum: c08fa94cab706c030c8180188ca235a7223659e32a408af43e883ef298a574ee Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2023.3 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net Architecture: powerpc_8548 Installed-Size: 48411 Filename: batmand_1440-1_powerpc_8548.ipk Size: 49124 SHA256sum: 7ee12a2a77589018dc63ce5c60f26ccd5490a75cc8faaef377eb30eead85170a Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.14-1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 460047 Filename: bird2_2.14-1_powerpc_8548.ipk Size: 458704 SHA256sum: 2e8b4faede3a618a5c32c0326655cdc44bbe0cc0cc298cac4e2b74623ed53fdc Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.14-1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 9810 Filename: bird2c_2.14-1_powerpc_8548.ipk Size: 10819 SHA256sum: c4a561edae16026bd5baf8c1cd709699c03925ce416527ab5df66fa94debeb03 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.14-1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 8360 Filename: bird2cl_2.14-1_powerpc_8548.ipk Size: 9318 SHA256sum: c0604cbf7a84bc4bfbafb1f6cb98ccb802fcd99c63b71a6a28758fa8f2cddd0a Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: 7.1.1-5 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 4709 Filename: bmx7-iwinfo_7.1.1-5_powerpc_8548.ipk Size: 5327 SHA256sum: 9be554de1757d3924920d9f70078ef362bc7688fed80a6c4c4742c37c7129207 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: 7.1.1-5 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 9451 Filename: bmx7-json_7.1.1-5_powerpc_8548.ipk Size: 10036 SHA256sum: dad2e1536f16809bd14868452ec0a30354cb813ebc43cabfc45dcd829f4d3090 Description: json plugin based on json-c Package: bmx7-sms Version: 7.1.1-5 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 6672 Filename: bmx7-sms_7.1.1-5_powerpc_8548.ipk Size: 7340 SHA256sum: 65966f207a8cb66d639366db0cee38b0647d0ba45cef560aca7ac62087f2889e Description: sms plugin Package: bmx7-table Version: 7.1.1-5 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 11519 Filename: bmx7-table_7.1.1-5_powerpc_8548.ipk Size: 12155 SHA256sum: c97b427bb4936deb82162de043e8877350939555e8f3bd79b389bd270e9ed9e9 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: 7.1.1-5 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 6196 Filename: bmx7-topology_7.1.1-5_powerpc_8548.ipk Size: 6921 SHA256sum: f9f07ad32e51189f9b458d718578e49c3458495fa37c80eed23bb73b8a765a4b Description: topology plugin Package: bmx7-tun Version: 7.1.1-5 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 30526 Filename: bmx7-tun_7.1.1-5_powerpc_8548.ipk Size: 30922 SHA256sum: 4366226f00e3749130bc404c7f29a01f04f835ff28b75e21ed1ccd6f79af4c74 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: 7.1.1-5 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 9307 Filename: bmx7-uci-config_7.1.1-5_powerpc_8548.ipk Size: 9953 SHA256sum: 99461cb255e9bd08d4fc10b77bda9e0a620fc86a7d39739674f7f073cb9390fe Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: 7.1.1-5 Depends: libc, zlib, libmbedtls12, libiwinfo20230701 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 197533 Filename: bmx7_7.1.1-5_powerpc_8548.ipk Size: 197763 SHA256sum: f85ce12c767209410052c4297f5dc5b1f19b800274ab96d88f7866b6264a7fb3 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: v21.1-5 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 382654 Filename: cjdns-tests_v21.1-5_powerpc_8548.ipk Size: 381130 SHA256sum: 57cb7e2bb9b14ac32b49160a2687c242aa17868d6498d47c566e6d2c81c158c6 Description: cjdns test cases Package: cjdns Version: v21.1-5 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 452027 Filename: cjdns_v21.1-5_powerpc_8548.ipk Size: 450694 SHA256sum: 735d9762eceb12da8ae7978300dee3ae06a4f2b913f2c696d90297d409d3a6af Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018-12-21-c4376661-1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 545 Filename: hnet-full-l2tp_2018-12-21-c4376661-1_powerpc_8548.ipk Size: 1389 SHA256sum: 369431c5fe3aee3500abe01059b065608a2252d2639ed3a198036729a8df6017 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018-12-21-c4376661-1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 97 Filename: hnet-full-secure_2018-12-21-c4376661-1_powerpc_8548.ipk Size: 938 SHA256sum: 8984b7e53fd0c29c8d82df284f850a0b8ad76ac108b00e100751f035c8eece5e Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018-12-21-c4376661-1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 97 Filename: hnet-full_2018-12-21-c4376661-1_powerpc_8548.ipk Size: 910 SHA256sum: f415b7692cf13c4a98c6ab800dd608faaf0543c4bb84cdec8932aea0ad1a9f48 Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018-12-21-c4376661-1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 114451 Filename: hnetd-nossl_2018-12-21-c4376661-1_powerpc_8548.ipk Size: 115107 SHA256sum: e9ce2b20da713b6a5af9c4888983e0ae151f2136f0b81376f515b48a882277d9 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018-12-21-c4376661-1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 127710 Filename: hnetd-openssl_2018-12-21-c4376661-1_powerpc_8548.ipk Size: 127891 SHA256sum: 93e4a1da37e4d9933a66dd8d7f96c32fec2f3100283354b89b1ab6cad094cb05 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci Architecture: powerpc_8548 Installed-Size: 5672 Filename: luci-app-cjdns_1.3-9_powerpc_8548.ipk Size: 6557 SHA256sum: 8c73085aebbec71168b3545413bbc3cb433ae952598eb9af640858a2dd9e0bcd Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018-12-21-c4376661-1 Depends: libc License: GPL-2.0-only Section: luci Architecture: powerpc_8548 Installed-Size: 56777 Filename: luci-app-hnet_2018-12-21-c4376661-1_powerpc_8548.ipk Size: 57617 SHA256sum: 7f0d0ddc8cebd8db3a299698e4df6f7cffc23f1dfd9ae920fea606b5758ea71f Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-15 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 6995 Filename: luci-app-olsrd2_0.2.6-15_all.ipk Size: 7866 SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0 Description: OLSR2 configuration and status module Package: mcproxy Version: 2017-08-24-93b5ace4-9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 138362 Filename: mcproxy_2017-08-24-93b5ace4-9_powerpc_8548.ipk Size: 138816 SHA256sum: e15d88aa2a4f8f8062b1ae71553ebc49d85a6562d60e15ff529312e6ac578442 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 2.0.0-1 Depends: libc License: GPL-2.0-or-later Section: net Architecture: all Installed-Size: 5498 Filename: mesh11sd_2.0.0-1_all.ipk Size: 6885 SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon dynamically checks configured parameters and sets them as required. Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014-12-12-2d6d1b0b-7 Depends: libc, libubox202312041 License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 7908 Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_powerpc_8548.ipk Size: 8872 SHA256sum: 9596c4e83e92a272884d329b0fe16865b73fb3d46b5ea8e5cab94addb3bd40d6 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 1943 Filename: naywatch_1-7_all.ipk Size: 2849 SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 34728 Filename: ndppd_0.2.5-2_powerpc_8548.ipk Size: 35397 SHA256sum: 0e70c68bf842660536c459d5f0302bdd1bfbc3b76d9b15103c1db6f355d01f82 Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 51244 Filename: nodogsplash_5.0.2-1_powerpc_8548.ipk Size: 51777 SHA256sum: b3e49e213a1be72706782fd69961c28cf746b3c49d111b13f8ae17165d619f8d Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020-05-22-0dfef1eb-3 Depends: libc, libubox202312041, mdnsd License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 13002 Filename: ohybridproxy_2020-05-22-0dfef1eb-3_powerpc_8548.ipk Size: 13664 SHA256sum: cb7b6433a806ea8fb4099b9eae9b659e168e20c00b9783bb40f78ff397155255 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 2485 Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 3124 SHA256sum: eb316f03508e8067df29f4d4c4d053beb1f5ea55af242bd721cae8a13ff0805c Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 14582 Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 15248 SHA256sum: 7dc510cf4215e2009f4943de05a386b6a4e8afb709548f381fc536f2491ddce7 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 4669 Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 5252 SHA256sum: 3f14cee260c50a0fc69b13101f7829e9bcde809874760c2cfe624c506c233104 Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 3003 Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 3646 SHA256sum: 4ddd63c3673745a37589848bbf18524345e3c84050b72b9d8dcb82717ba5b6b0 Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 5036 Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 5624 SHA256sum: efbb99e505243e7d59f8b93c497b955b7ee9a4bc832d41a6f0aa57f389c9cdea Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 3217 Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 3850 SHA256sum: 5e79df379eeff00892fc877f5324fba1d535b74566984cad495b41d4c7316114 Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 33940 Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 34488 SHA256sum: 7a7d1859b2e2c90ede1ed7261491504b90ad918afbef0544a306b64de5553086 Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 26705 Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 27048 SHA256sum: 90d13c9dd1b305b2a11209b8ed29c059638e1dd165eb9411738d23554f9c17e7 Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 11028 Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 11647 SHA256sum: be05b8fb9dabfa2c9a8e913bd521832da9329808af2214e3a572234f0b7bbe3e Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 13140 Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 13825 SHA256sum: 86537a25d5a676ca60d8b0688f1d23c3771ee65bd505c39689fdd0825e210787 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 15317 Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 15939 SHA256sum: 2ba8498c946f4759d63c52bf0bdf6c9fe67d1ad85f6a0a07809a24928b2e44c5 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 10723 Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 11363 SHA256sum: 387d4e3167179721bb30c38d5368feb3ef206160e7cc9feaab3c9e1e62e64f04 Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 3510 Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 4119 SHA256sum: 8ae58a5b560687f9d550ea2e277bc1e750ffb1f8265fb057847af3a499e6729d Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 73144 Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 73020 SHA256sum: 86f85357892dd27775ef4dbc2288193fa55b1f0aab1847905f34c231491a0d78 Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 7944 Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 8610 SHA256sum: dca9ea0f514cad62f4c32f03eaa0eb935d64a02354e3f6fc7a0758bdbcee7fc1 Description: Quagga plugin Package: olsrd-mod-secure Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 11745 Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 12502 SHA256sum: 46f28a520ddc08d33d85b94f25be065a92e68f176c9ab1ba44dc5bf8311077cf Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 5556 Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 6187 SHA256sum: cb28763e7d27eddd6493317874ee2d846073c94039da01e7a58d0980ca3af0d7 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 17397 Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 18062 SHA256sum: 9a26b0c5b82ac858f53bd5d1313403be2451e8ffb7957cdf37c2bb5be374e793 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 2149 Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 2772 SHA256sum: a18ae4850ad3e9d9deba60779d741742eae3298b82f17249db2ecb272abef47c Description: Watchdog plugin Package: olsrd-utils Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 1180 Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 1930 SHA256sum: 42ac3c31c281e0b5d76c26aa918b0491eae3b68596c288e4b43c6e8f79f9d213 Description: Utils for OLSRD Package: olsrd Version: 2023-06-12-a9b3f1ac-1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net Architecture: powerpc_8548 Installed-Size: 154591 Filename: olsrd_2023-06-12-a9b3f1ac-1_powerpc_8548.ipk Size: 154940 SHA256sum: 51c5cdaf46aa930199a18723ce3a386d592b33934cee6e7164ddfffc379a8dcc Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022-08-25-fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net Architecture: powerpc_8548 Installed-Size: 216851 Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_powerpc_8548.ipk Size: 217320 SHA256sum: 204248b3794b548b1ec15584b9b2c227ad6938edcba6158c02e57218f8d53773 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022-08-25-fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net Architecture: powerpc_8548 Installed-Size: 210968 Filename: oonf-dlep-radio_2022-08-25-fb15d54d_powerpc_8548.ipk Size: 211499 SHA256sum: 5588de47b79ca33bcfb93ff4da8a4408f7559f1ed0342bddd16e4d1dbbc8470d Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net Architecture: powerpc_8548 Installed-Size: 1545 Filename: oonf-init-scripts_0.9.1-r3_powerpc_8548.ipk Size: 2282 SHA256sum: ca7497b63adf410957a0ebfec21c76327abc3445ec15ae28a262d3ce60b42753 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022-08-25-1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net Architecture: powerpc_8548 Installed-Size: 314353 Filename: oonf-olsrd2_2022-08-25-1cec9b21_powerpc_8548.ipk Size: 314520 SHA256sum: 71313b04a50d7cf1fd4cf7d1ad124c5811be54d6f8add59f7c8665b54e0cc84f Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.2.0-1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net Architecture: powerpc_8548 Installed-Size: 165219 Filename: opennds_10.2.0-1_powerpc_8548.ipk Size: 164576 SHA256sum: f10fd7079d44c45b5ad9042214480589d003ea4ec5168988111baec1158a448d Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018-06-19-dbf4e591-4 Depends: libc, netifd License: Apache-2.0 Section: net Architecture: powerpc_8548 Installed-Size: 90300 Filename: pimbd_2018-06-19-dbf4e591-4_powerpc_8548.ipk Size: 91049 SHA256sum: 5cc1178812724946363c442deae9e6ad63c0967242fea1ed8aae40fe3a494dc3 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-3 Depends: libc, libjson-c5, libpthread License: MIT Section: net Architecture: powerpc_8548 Installed-Size: 44863 Filename: prince_0.4-3_powerpc_8548.ipk Size: 45587 SHA256sum: 1782d691907cea80d1bf140cc75fe5b16aaa2260a6410070781e743fbda42199 Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013-04-07-7710cce4-9 Depends: libc, libpthread License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 12611 Filename: vis_2013-04-07-7710cce4-9_powerpc_8548.ipk Size: 13314 SHA256sum: f5ab1ac029cc19b1aa4dd2215879f7ba31086710ac1e18f488bc7021fbb3dbb0 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020-05-22-0dfef1eb-3 Depends: libc, libubox202312041 License: GPL-2.0-only Section: net Architecture: powerpc_8548 Installed-Size: 10507 Filename: zonestitcher_2020-05-22-0dfef1eb-3_powerpc_8548.ipk Size: 11222 SHA256sum: adfcd0cea53098b86b17dadae113848bc641929db0d87154f6ec1cce333447e6 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.