Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 22965
Filename: ahcpd_0.53-3_mipsel_mips32.ipk
Size: 23736
SHA256sum: 638fd685a8f9592897fda1dac074475769192e86d1bd4c422fd1f9d6ea250162
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 26845
Filename: alfred_2023.3-1_mipsel_mips32.ipk
Size: 27785
SHA256sum: 41477314e061890787704d27a65abc401e46e9673f5a629b95e3ceff709d5ab0
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mipsel_mips32
Installed-Size: 3961
Filename: babel-pinger_0.1-1_mipsel_mips32.ipk
Size: 4612
SHA256sum: 31d4cde0400f423bb8f15fcbf2bbf9b8257213c2b4ddf3a8fa4137239b1beb44
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 63485
Filename: babeld_1.13.1-1_mipsel_mips32.ipk
Size: 64585
SHA256sum: b89ddc1ea63ae20c304c797c4f49eb53ac68f2b559809ce0243689efa9588458
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 41456
Filename: batctl-default_2023.3-1_mipsel_mips32.ipk
Size: 42240
SHA256sum: d2ec3004bfd385f7aad7ac66a4ffbc87df58f44f463ba99baad07a5337d3c76d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 48739
Filename: batctl-full_2023.3-1_mipsel_mips32.ipk
Size: 49595
SHA256sum: c606682eff89e5799bd67b8a4350a0051fe18642ce5e4543085d4ee9a6744d13
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 13587
Filename: batctl-tiny_2023.3-1_mipsel_mips32.ipk
Size: 14487
SHA256sum: d5862c99b18830ad0490617846af739db39ff5403c3c15bb4a69ea26faebc8a0
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 39423
Filename: batmand_1440-1_mipsel_mips32.ipk
Size: 40119
SHA256sum: 266c53b29716218223894875fc060a5a5f0e85b76188d374cc269d739b1f9e50
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 391101
Filename: bird2_2.14-1_mipsel_mips32.ipk
Size: 389917
SHA256sum: 7068d7dcd61b78b8d662ca860134d92ca58cead6df27846696980a6768968a47
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 8922
Filename: bird2c_2.14-1_mipsel_mips32.ipk
Size: 9861
SHA256sum: b4aaac9218af7301b2d7058a957d74d07dd7552496d3c9d309fc9e16ca59cd1a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 7695
Filename: bird2cl_2.14-1_mipsel_mips32.ipk
Size: 8589
SHA256sum: db2fc58dfc8cbb70249881e284b0a1e7730b3595629c8d4a3909a7e48f171221
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 4025
Filename: bmx7-iwinfo_7.1.1-5_mipsel_mips32.ipk
Size: 4646
SHA256sum: 4efda5c6750ee93dcfab47fe733c125105b04deae513ac85670c57fa1fe69077
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 7960
Filename: bmx7-json_7.1.1-5_mipsel_mips32.ipk
Size: 8631
SHA256sum: d89c0b036036b6c3eff9b3dd278a2468355576827def749856c0664f48f4d94c
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 5529
Filename: bmx7-sms_7.1.1-5_mipsel_mips32.ipk
Size: 6089
SHA256sum: 4263577d52a463d094f558e1757f793e846fc3c05d4c0c00ec3bcdf8ca02d84a
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 9498
Filename: bmx7-table_7.1.1-5_mipsel_mips32.ipk
Size: 10155
SHA256sum: 79fb1f122cd72b8e55b8c33be3f4918017fb1ee0968381fb4eb98d05b29e00cc
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 5093
Filename: bmx7-topology_7.1.1-5_mipsel_mips32.ipk
Size: 5664
SHA256sum: 5093ac99ba5bbcba4a9c5bb8d36d126b57c62af6ee2521e52e5d04f39e9a6721
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 25335
Filename: bmx7-tun_7.1.1-5_mipsel_mips32.ipk
Size: 25948
SHA256sum: a6c7180bdaeaa82e9daa42bacced1d1f5edbc66a6cfbff46c83654b6a3a1a8e2
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 8096
Filename: bmx7-uci-config_7.1.1-5_mipsel_mips32.ipk
Size: 8828
SHA256sum: 91b36e4be467d452973db75dd3a36aef76d108d93e94241ac4e1ae9619391ced
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 178227
Filename: bmx7_7.1.1-5_mipsel_mips32.ipk
Size: 178707
SHA256sum: 96db39ff1dbded3b750bb2c798ec5f9aa6fe987e7b30aa877bbd4ed21611dcda
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 378972
Filename: cjdns-tests_v21.1-5_mipsel_mips32.ipk
Size: 378701
SHA256sum: 093129b188ef9b69f93ce0857fdbeba976adcf3344846eacfdcf2dce15a861a1
Description:  cjdns test cases

Package: cjdns
Version: v21.1-5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 456491
Filename: cjdns_v21.1-5_mipsel_mips32.ipk
Size: 456403
SHA256sum: 564e4bceecb10e35aa9eaee6cc807a5427b70a4c41d38407c3d48923e25b5ef9
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 1392
SHA256sum: d5c67f19d018e5f14b09c0737ad4aa55c87ea0a362891e739bba65f72fcd07f1
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 934
SHA256sum: 0ef73d3c08a3eb75d2b1410c5cad184e6be679df395b8095cde1e50c7270bea0
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 910
SHA256sum: 7a9f303d788920472d5221ef96698df9f39b1f05b794f60bd1701a1d23706cbc
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 96386
Filename: hnetd-nossl_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 97303
SHA256sum: bcf9e87fbd9b2a79f98fab7ba1155b47525d7c71d5cdbad1b43594c7e065ae68
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 106709
Filename: hnetd-openssl_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 107433
SHA256sum: fa558cc9fe9060552813e11ab938307b729863361808c837d408e75f23602377
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mipsel_mips32
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_mipsel_mips32.ipk
Size: 6557
SHA256sum: 2564eb9f8f87813b04f884c9b0a244f3b8a08445a885f501864fef3392f2bfcb
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_mips32
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_mipsel_mips32.ipk
Size: 57615
SHA256sum: 71d9c7d068e354452d9c3267197bb0949dddd750270ccd7bb9d66b30f2858442
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 119313
Filename: mcproxy_2017-08-24-93b5ace4-9_mipsel_mips32.ipk
Size: 119977
SHA256sum: 1cab5cc37fe7b5d1a03bc6e4004252b67e7a33c132108369bd89a6b7d5a06da0
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 6593
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mipsel_mips32.ipk
Size: 7595
SHA256sum: caa95c3bc1bc819e283b6b294702026812cf8ccb47c2e789eb49b86f7cd3ddc7
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 30601
Filename: ndppd_0.2.5-2_mipsel_mips32.ipk
Size: 31150
SHA256sum: 7f8585648d9e87d99e154bdc95308b6f2da6e1740af515477c24851c0f29d60e
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 45611
Filename: nodogsplash_5.0.2-1_mipsel_mips32.ipk
Size: 46058
SHA256sum: bd07f7dcb52c0a68adcb9d2150b0a33af00478a2e07ae1904686a3d10921ea3a
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 11310
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mipsel_mips32.ipk
Size: 11989
SHA256sum: 11dd32494224d6b9085e879cf708957c1b994564a95dec787b7daedf9afc3ce4
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2041
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 2703
SHA256sum: fc8e4b3b36ec49372ffefc4220d5057408981e84659b8b69294bb3a67171a2be
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 12056
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 12795
SHA256sum: 893f90e8bf7312eb67a7d5ea9e0c9fa37c231a76a1fbd7520ed5806c22adfb8d
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 3822
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 4427
SHA256sum: 71ef61555c92e0cd106d7ff5365efdb426e8f11a3e143ba2720116f53fd0c696
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2394
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3031
SHA256sum: 479f8b39069e31957cf7366d92111699f784364c584c1a0478b1cc28dfe93cfa
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 4227
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 4817
SHA256sum: 5a3fa0994c0094bb53a8367af2de11e27453a8ac1289b71a7b98cf9ebd2cf67f
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2584
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3213
SHA256sum: b3123943c3bcc2e946ecaf1ee17e2fd8b731c4ade683c8e3fa051b243eb7c030
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 31158
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 31689
SHA256sum: 24713437443e12f03492a7ef560cb337cc57f3a1f2c2b272ab407bbc266763c6
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 23017
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 23715
SHA256sum: c05d2d824c35687feed6b2bd62cf852d28d94c735a64fab4b410116199ae3781
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 8878
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 9532
SHA256sum: ba99b5a2781c62d6dd8ac4e944bc3273a5ccfe0aff6c1629fbca130069a2bb22
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 11331
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 11954
SHA256sum: 72f4025ad93244947417a37df965108ec74cbd6e94563f92b953129e8932df91
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 13354
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 13975
SHA256sum: d31ef27f6156b65b6094d655277a5e04464a8287dda3de460f5663cd4ee6bfc0
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 8538
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 9195
SHA256sum: 3ed92aff690fe91f891292ce73fd27a463ced5466b6fa5181d222e584c270ebc
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 2947
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 3579
SHA256sum: 72c7b6f30ae36c83578710eaa4273f27c503cfc28accd1d7e713c12f07cc45b0
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 62467
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 63095
SHA256sum: 623089fc9069486fce2b44ce4d199abe9f19cdea3c7f0c0b0026235730560149
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 6213
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 6939
SHA256sum: f5bb1f23d438d02e3320deb0803d95106be2e7e57d9d9921be451a1082b63396
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 10359
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 11028
SHA256sum: 49abd6b72e5844b353d946db4a18c3d2b51f867afcfe7cd841fcb8974048e7f6
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 4518
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 5160
SHA256sum: a827ed7df25292ef852ddbfc5d76c60776914481a5d63a1edd4d00f1fd87f548
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 15145
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 15738
SHA256sum: 44ec4cb102d49451b19df68ffaeafe97dd4a5e8a5847b6b37d3a4508d603ebbd
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 1714
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 2382
SHA256sum: a319462c44511a5cd2a47e74157c0769d47280297b4cb2fafaa416c9c40375a2
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 1927
SHA256sum: ae058178e15ed5767dfa4411139dc2f638f8f9726313bb85cc925948d1cc6633
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 139621
Filename: olsrd_2023-06-12-a9b3f1ac-1_mipsel_mips32.ipk
Size: 140347
SHA256sum: 49a5b123faca5223ee7ef905f10aa4b3ecdcc55d411119028f937b515d9df290
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 159959
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mipsel_mips32.ipk
Size: 160440
SHA256sum: 782e4f99ac2e7e3b718760a49da8153f82932820dd1e3524d0b5f6e388de04cb
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 155977
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mipsel_mips32.ipk
Size: 156597
SHA256sum: a467e1eff9d0d991ce710cbff0c8710d6adb0702dcbf6070bd1a968896362ea8
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mipsel_mips32
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_mipsel_mips32.ipk
Size: 2275
SHA256sum: 3c26676dbdf55cefc0cb675da132ab4e882370e80891c6fb1218f4f80aca27bf
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mipsel_mips32
Installed-Size: 232439
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mipsel_mips32.ipk
Size: 232770
SHA256sum: fb6b5c3dd13111146506b826bf48c88eba324b44cd4b906d690044e89c62bbd6
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mipsel_mips32
Installed-Size: 156664
Filename: opennds_10.2.0-1_mipsel_mips32.ipk
Size: 156341
SHA256sum: a62765ab1e6870079d65aaa3e687073683b9bef62865af785a3a440eada752fb
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 79020
Filename: pimbd_2018-06-19-dbf4e591-4_mipsel_mips32.ipk
Size: 79839
SHA256sum: 200189d424ba395dce4772e697516f3f58ac0613753252c8db60c80bc6668a6d
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mipsel_mips32
Installed-Size: 33337
Filename: prince_0.4-3_mipsel_mips32.ipk
Size: 33915
SHA256sum: a7999b2d2aa2ef63db1c8ddf65e757d594fddfc8d4cbdf1c260b710b43add0ef
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 10459
Filename: vis_2013-04-07-7710cce4-9_mipsel_mips32.ipk
Size: 11117
SHA256sum: d57112596a7a94c2d51ffaee11f17692cdfcce3f94b0126abea4a1746f92015e
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: mipsel_mips32
Installed-Size: 9144
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mipsel_mips32.ipk
Size: 9814
SHA256sum: 586d7e980036373bd020bc4b864de6f365be1af584b2fa5ffaabb29b56649171
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.