Package: ahcpd Version: 0.53-3 Depends: libc, ip, librt License: MIT Section: net Architecture: mips_4kec Installed-Size: 19353 Filename: ahcpd_0.53-3_mips_4kec.ipk Size: 20094 SHA256sum: d2b5bb89b34af58318ffef28c8d79b60a4fd32e803c422192e991d4d8647f082 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2023.3-1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net Architecture: mips_4kec Installed-Size: 23697 Filename: alfred_2023.3-1_mips_4kec.ipk Size: 24632 SHA256sum: 87b32d93659f0afe2a59d8dc5c828e7d175414dd28f616ee0738e8585d5d36f2 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-1 Depends: libc, librt Section: net Architecture: mips_4kec Installed-Size: 3543 Filename: babel-pinger_0.1-1_mips_4kec.ipk Size: 4192 SHA256sum: 1c8fb0d4dc1453af646954168f04607166346b23aeea8b6f7f0d426eeb6c1d3b Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-1 Depends: libc, libubus20231128, libubox202312041 License: MIT Section: net Architecture: mips_4kec Installed-Size: 54424 Filename: babeld_1.13.1-1_mips_4kec.ipk Size: 55443 SHA256sum: 36795dc6438d051ce3642c324e0735887e9fbe6b5c48f79a7031301a0565055a Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2023.3-1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net Architecture: mips_4kec Installed-Size: 36740 Filename: batctl-default_2023.3-1_mips_4kec.ipk Size: 37298 SHA256sum: 150484dbd49bf4f270ccc9bc4fa9f57c0cb4a056e0d8720fe14f8cc14b3b6d03 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2023.3 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2023.3-1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net Architecture: mips_4kec Installed-Size: 43136 Filename: batctl-full_2023.3-1_mips_4kec.ipk Size: 43806 SHA256sum: cccf56bdd72f225df94169149b566fcf001f4e2019162d1338a7196f40258caf Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2023.3 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2023.3-1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net Architecture: mips_4kec Installed-Size: 11989 Filename: batctl-tiny_2023.3-1_mips_4kec.ipk Size: 12849 SHA256sum: 6276a02b8d367aaf69d5eb750d91115a8152d990910ced40dc551c53441ed2ac Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2023.3 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net Architecture: mips_4kec Installed-Size: 35496 Filename: batmand_1440-1_mips_4kec.ipk Size: 35997 SHA256sum: d7121ff16d4fa869786113adbabd4b62a112097959cdf994931cb9f89daf4baa Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.14-1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 351917 Filename: bird2_2.14-1_mips_4kec.ipk Size: 351286 SHA256sum: b3cb34c078efb73c5a469674bb0574ec32cdaf67e5df6b5e4f39fb412af66fd1 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.14-1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 8123 Filename: bird2c_2.14-1_mips_4kec.ipk Size: 9081 SHA256sum: 3b023ec1972aae9ec33b03d7755706e5cdd8e68ebf8c8d8005fd529b02c3dbbe Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.14-1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 7045 Filename: bird2cl_2.14-1_mips_4kec.ipk Size: 7941 SHA256sum: 29a15f1b559f7e50126ad9240ddfaa8c043f64bd1d4b17802410aa2bddf5e058 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: 7.1.1-5 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 3977 Filename: bmx7-iwinfo_7.1.1-5_mips_4kec.ipk Size: 4606 SHA256sum: 9f32ccfc2578ef5acb51a24991461593246a5d19bce6aef0b0943e857b7cfda1 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: 7.1.1-5 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 7421 Filename: bmx7-json_7.1.1-5_mips_4kec.ipk Size: 8096 SHA256sum: 66571e0852bbe8c30c2dd40c95242ca02c1bec7052e57ed23d085da7336d5d80 Description: json plugin based on json-c Package: bmx7-sms Version: 7.1.1-5 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 5335 Filename: bmx7-sms_7.1.1-5_mips_4kec.ipk Size: 5906 SHA256sum: 5bce030d0b45541afcea9e92a2275f545340ac486c16f873933a6ebfa198bc06 Description: sms plugin Package: bmx7-table Version: 7.1.1-5 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 8874 Filename: bmx7-table_7.1.1-5_mips_4kec.ipk Size: 9536 SHA256sum: 80c792436bda82ce3ce678dc9dcc512b5d300a7d664252f18b08935cccc01c74 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: 7.1.1-5 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 5021 Filename: bmx7-topology_7.1.1-5_mips_4kec.ipk Size: 5617 SHA256sum: dde8bfe40fc9a56d8f36922a3fdefdcf1221821fb17084fda33dc55ced053a9f Description: topology plugin Package: bmx7-tun Version: 7.1.1-5 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 24319 Filename: bmx7-tun_7.1.1-5_mips_4kec.ipk Size: 24934 SHA256sum: 7386ef45d15b8c7477868cef4d8e4e01583c2736c0d0ad0a21aef9ea636074d9 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: 7.1.1-5 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 7609 Filename: bmx7-uci-config_7.1.1-5_mips_4kec.ipk Size: 8326 SHA256sum: cf3e43274d9a6055924211371059fc08f3c8f964a2e263179279c6ccfdf854cf Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: 7.1.1-5 Depends: libc, zlib, libmbedtls12, libiwinfo20230701 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 158343 Filename: bmx7_7.1.1-5_mips_4kec.ipk Size: 158739 SHA256sum: 9864176cc62d6aab90bff801ccbdbc1cd07abe00d9889a9c9996f009f3e18812 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: v21.1-5 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net Architecture: mips_4kec Installed-Size: 334216 Filename: cjdns-tests_v21.1-5_mips_4kec.ipk Size: 334273 SHA256sum: 2fe5a50c30bc61c49baf47aa584d22752fae792a0457c9a723b9c7d098cb2822 Description: cjdns test cases Package: cjdns Version: v21.1-5 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net Architecture: mips_4kec Installed-Size: 401356 Filename: cjdns_v21.1-5_mips_4kec.ipk Size: 401604 SHA256sum: 1ec864fc9d1d4be5e99176fcec87e584241252235c725e114bce26171b9ccecb Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018-12-21-c4376661-1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 545 Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mips_4kec.ipk Size: 1391 SHA256sum: 502ca24188c706af1ba2debe7beea4650aa3a709eff1168646746398bc393f81 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018-12-21-c4376661-1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 97 Filename: hnet-full-secure_2018-12-21-c4376661-1_mips_4kec.ipk Size: 927 SHA256sum: 8dfe50a700ceedddadb27106b666c7a818f806267042524f3ccba7321b3d833a Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018-12-21-c4376661-1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 97 Filename: hnet-full_2018-12-21-c4376661-1_mips_4kec.ipk Size: 908 SHA256sum: 8a05e31a985898533365200eef242a1de074253ab83beffac0d854e66d6494b4 Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018-12-21-c4376661-1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 83283 Filename: hnetd-nossl_2018-12-21-c4376661-1_mips_4kec.ipk Size: 84184 SHA256sum: 6405c05613dee4d574b427c33440a29a18709959f7b674ad04ede79aa91cfb2e Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018-12-21-c4376661-1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 92107 Filename: hnetd-openssl_2018-12-21-c4376661-1_mips_4kec.ipk Size: 92802 SHA256sum: ecf808dc2d130a32e97e95cb28898375e7c5ef396aa15636a390969877872a3c Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci Architecture: mips_4kec Installed-Size: 5672 Filename: luci-app-cjdns_1.3-9_mips_4kec.ipk Size: 6553 SHA256sum: 7c9bcde86f19b62226a62d64afabba390cc6070dfa73165c01320988634609eb Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018-12-21-c4376661-1 Depends: libc License: GPL-2.0-only Section: luci Architecture: mips_4kec Installed-Size: 56777 Filename: luci-app-hnet_2018-12-21-c4376661-1_mips_4kec.ipk Size: 57613 SHA256sum: 06827497b0f60dc8a71d8b40f1bcb7dd910bb85f3437edc4701146926bafd04e Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-15 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 6995 Filename: luci-app-olsrd2_0.2.6-15_all.ipk Size: 7866 SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0 Description: OLSR2 configuration and status module Package: mcproxy Version: 2017-08-24-93b5ace4-9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 106687 Filename: mcproxy_2017-08-24-93b5ace4-9_mips_4kec.ipk Size: 107367 SHA256sum: c0f39b7c61d3661c4470e6501e73a202ae0697d853528c0259cf4fa657544ec4 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 2.0.0-1 Depends: libc License: GPL-2.0-or-later Section: net Architecture: all Installed-Size: 5498 Filename: mesh11sd_2.0.0-1_all.ipk Size: 6885 SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon dynamically checks configured parameters and sets them as required. Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014-12-12-2d6d1b0b-7 Depends: libc, libubox202312041 License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 5600 Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mips_4kec.ipk Size: 6554 SHA256sum: b4aded6a938974a75b643666f5e790f3b783392f1f36e8a9c20b321013d8f846 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 1943 Filename: naywatch_1-7_all.ipk Size: 2849 SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net Architecture: mips_4kec Installed-Size: 26749 Filename: ndppd_0.2.5-2_mips_4kec.ipk Size: 27621 SHA256sum: 2a6f423603f0279fb242d8d2be4872c26819595a66ae48f271fa4b71f983669b Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 42666 Filename: nodogsplash_5.0.2-1_mips_4kec.ipk Size: 43382 SHA256sum: dd0feac33da26f7b11387dc82a9f2e18c42c1ee11c12baceddb3ad3e80524820 Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020-05-22-0dfef1eb-3 Depends: libc, libubox202312041, mdnsd License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 9277 Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mips_4kec.ipk Size: 9991 SHA256sum: 51b90065e9a1e46bd61e3d7a7a192d2feb71928b68e69fcb956e0a71448bdd56 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 2042 Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 2697 SHA256sum: 6bbe6aacc2736b8ab47ab23290adcf6da17ca673980a71198f9c0bcc641372e3 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 11054 Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 11684 SHA256sum: a05642066186b24f693fe1746b59af95e86bff3319e0c9a216617a1b95cbb5f9 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 3708 Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 4318 SHA256sum: a0fd9b964b061a674ffd469c8275554bd13afedca2c7be0429a167768a714d43 Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 2235 Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 2900 SHA256sum: 134c65e550619e9c4f7f0d83f0a69690facb4d4451f2437b982168b4d811aa8a Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 3839 Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 4449 SHA256sum: 15ef35e56b8b7fa114297d8d9555a31faf96f9b917307ca0e8837cfd3df5dda9 Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 2479 Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 3134 SHA256sum: 82e7d744d126b5829f57692b186116c95d5b51bee59aea35f07dc082861284f7 Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 30491 Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 31083 SHA256sum: d01e8bd11523e9639899c847870d6b858ef4799dc5c8a25145c2e4342b8e7e5c Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 20711 Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 21402 SHA256sum: b882b3a16188b6cf78583f7db856f4777c5d4ff455d4240fb24a8a2aaf05eb41 Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 8352 Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 8998 SHA256sum: 9d353469d6be0cf0b1e2d10769739f59a7ae15ce902159ee76b0fa695da5316f Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 10229 Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 10872 SHA256sum: 588fa347851e8ab2111a413a4155070faa75d4ebe916cfca3d32d0a6aa7421c7 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 11859 Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 12471 SHA256sum: bf7f14c23eb0e0445c2cd350c353ed4fe80bce53286546cf753dea3e30696035 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 7894 Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 8554 SHA256sum: fc118e0548e7734f14ff369c187426821f4c0df2cbad8e65dbe664c8881346c7 Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 2845 Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 3477 SHA256sum: c283cdae0b13b78f1e93c55564f6efd69c480a73904600cfa7f942b7bf742ae8 Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 59169 Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 59868 SHA256sum: 211c900259527fed506e747a87aed7f894f94c9dfa367f6e6bf10510d18b0782 Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 6002 Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 6603 SHA256sum: 2a13d2df7559bbebe5abadbcc71e7b0eb696cb85f1def93516afec5462363f16 Description: Quagga plugin Package: olsrd-mod-secure Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 9887 Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 10577 SHA256sum: 766674f9147d29126385aeb56e10c7d00d711f3456c3c6dd39ab400c27eb3cce Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 4289 Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 4945 SHA256sum: 9cc7d9bf59dd8c0086e00133a091045f4b1c919ee88ca5078fceda609b1f3086 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 13152 Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 13770 SHA256sum: 2ae9e30b22391726f1292fc150cfceeaea6e09438101af6ac84fd3b981cd39a7 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 1745 Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 2408 SHA256sum: 7ee9cbba65b00aa55d6b34c5c790e03e06a68c804efcf51d314433f8531f9323 Description: Watchdog plugin Package: olsrd-utils Version: 2023-06-12-a9b3f1ac-1 Depends: libc, olsrd License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 1180 Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 1931 SHA256sum: 7a3c6eae3c680f95f384114355f7b37cdf3648c8dbcd777c33febbd7b79ff349 Description: Utils for OLSRD Package: olsrd Version: 2023-06-12-a9b3f1ac-1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net Architecture: mips_4kec Installed-Size: 127414 Filename: olsrd_2023-06-12-a9b3f1ac-1_mips_4kec.ipk Size: 128142 SHA256sum: 9448b3b9674956da58df1bb30c024800b76952e64e6bc44c7b161aecb4f43f87 Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022-08-25-fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net Architecture: mips_4kec Installed-Size: 135952 Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mips_4kec.ipk Size: 136736 SHA256sum: 478988bd74f666a07dcea1e1aa878e926126bc9d2e8814e456b48f372cea53df Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022-08-25-fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net Architecture: mips_4kec Installed-Size: 132644 Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mips_4kec.ipk Size: 133397 SHA256sum: d8491f768f5d2513f3e64198f5f651489105e013c4562c877f636e248f011e97 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net Architecture: mips_4kec Installed-Size: 1545 Filename: oonf-init-scripts_0.9.1-r3_mips_4kec.ipk Size: 2277 SHA256sum: 2a64bd7385cfe34ff03ce7e19319c62f6e84f167d3a3715ea880b7eb6541d5bf Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022-08-25-1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net Architecture: mips_4kec Installed-Size: 198085 Filename: oonf-olsrd2_2022-08-25-1cec9b21_mips_4kec.ipk Size: 198869 SHA256sum: 8955669c246c2242f842562e143e2bea4e1e8f3894573931a92e20fd1f67f730 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.2.0-1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net Architecture: mips_4kec Installed-Size: 154660 Filename: opennds_10.2.0-1_mips_4kec.ipk Size: 154259 SHA256sum: db532b0151a5490ba3ee8b2781c7a87293b81d54d25ae1ebac4280ef0f736e09 Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018-06-19-dbf4e591-4 Depends: libc, netifd License: Apache-2.0 Section: net Architecture: mips_4kec Installed-Size: 71599 Filename: pimbd_2018-06-19-dbf4e591-4_mips_4kec.ipk Size: 72494 SHA256sum: 329511bc5fd268c5ee867d7eadd40dc9354b86c4dae0e41a041a4b87b2b57dbd Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-3 Depends: libc, libjson-c5, libpthread License: MIT Section: net Architecture: mips_4kec Installed-Size: 33219 Filename: prince_0.4-3_mips_4kec.ipk Size: 33766 SHA256sum: 99596c71494cc63f6ffb27872b5dc3dbd9b8ac183aecf373d813716473540c5c Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013-04-07-7710cce4-9 Depends: libc, libpthread License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 9035 Filename: vis_2013-04-07-7710cce4-9_mips_4kec.ipk Size: 9713 SHA256sum: 34e6a97b36f5968fdc36834d189bfbfd470ef5502a294bfcef85be88ce3a6c9b Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020-05-22-0dfef1eb-3 Depends: libc, libubox202312041 License: GPL-2.0-only Section: net Architecture: mips_4kec Installed-Size: 7146 Filename: zonestitcher_2020-05-22-0dfef1eb-3_mips_4kec.ipk Size: 7818 SHA256sum: e51f7dcc8e41cdee108316e6c6d7d6f6d592ed4954284e929520e0b0fab33d40 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.