Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mips64_octeonplus
Installed-Size: 25105
Filename: ahcpd_0.53-3_mips64_octeonplus.ipk
Size: 25847
SHA256sum: 38d9b3cde69dc44fbc4440ecc2e6f532de4191964a9acdc4682ec4c34385e3c5
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mips64_octeonplus
Installed-Size: 28536
Filename: alfred_2023.3-1_mips64_octeonplus.ipk
Size: 29392
SHA256sum: f301df4bb10f66f5e3fd9aa823c3139c63b0717878b725fd064da9d9960d30d3
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mips64_octeonplus
Installed-Size: 4297
Filename: babel-pinger_0.1-1_mips64_octeonplus.ipk
Size: 4949
SHA256sum: f8e96aa3c7b9de61dc386f04e1c66934ee2c897f29428f1f849018c1c9dd4ee8
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: mips64_octeonplus
Installed-Size: 73662
Filename: babeld_1.13.1-1_mips64_octeonplus.ipk
Size: 74561
SHA256sum: e607c5b59268b5428bae93400fc383bb86e818c99c9af24bfa7c90c2f1603fef
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips64_octeonplus
Installed-Size: 44213
Filename: batctl-default_2023.3-1_mips64_octeonplus.ipk
Size: 45086
SHA256sum: db8f75e983decd62e8156351a800a26d55c10c9fcea80ab0d1a3f750ebd7f86a
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips64_octeonplus
Installed-Size: 51609
Filename: batctl-full_2023.3-1_mips64_octeonplus.ipk
Size: 52578
SHA256sum: 9fbb4e710f3f2b20c651220bc09369875e9e2b7f13b214fcf435b648031d34ac
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips64_octeonplus
Installed-Size: 14926
Filename: batctl-tiny_2023.3-1_mips64_octeonplus.ipk
Size: 15831
SHA256sum: 4a032ae54c028b0f2251dfcd58cce3fe7a8faaf045411afc649b874b03783fbd
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips64_octeonplus
Installed-Size: 43227
Filename: batmand_1440-1_mips64_octeonplus.ipk
Size: 43912
SHA256sum: 17b8759c45dd5e2d27a5d74991a618dc735fafd98d40459aba121edfc52b3561
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 412818
Filename: bird2_2.14-1_mips64_octeonplus.ipk
Size: 410994
SHA256sum: 40337e93016a2aaa47db1f2c536e3102c2f454195c28b696f1197c1024424fbb
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 9422
Filename: bird2c_2.14-1_mips64_octeonplus.ipk
Size: 10395
SHA256sum: d57285f513c85b80015c5dc92616bcb6cb49be7bd99f884131d6e4a66ca30da4
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 8072
Filename: bird2cl_2.14-1_mips64_octeonplus.ipk
Size: 9056
SHA256sum: b41701efa86733b15241708c03d5fb594899813cde484c2d220e03b59b0197da
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 3988
Filename: bmx7-iwinfo_7.1.1-5_mips64_octeonplus.ipk
Size: 4626
SHA256sum: 2746714f3a3b23d69c2ad2bad27cc3235b2df9a950772d36015390ffcf1965dc
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 7787
Filename: bmx7-json_7.1.1-5_mips64_octeonplus.ipk
Size: 8465
SHA256sum: fdea41b525e207c7df4a0d3be0a0b7a6e382c4e73245fc8f9f6e18ed5b88e48f
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 5642
Filename: bmx7-sms_7.1.1-5_mips64_octeonplus.ipk
Size: 6241
SHA256sum: 3270d99dd5bc947fbed3eaddf5c61f479676fe8505511152ee86805522a1a4c5
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 9535
Filename: bmx7-table_7.1.1-5_mips64_octeonplus.ipk
Size: 10174
SHA256sum: e42a43d8a68591ebe07dd80e20020366649a4eae23e9dfc54b34641b79aab90d
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 4997
Filename: bmx7-topology_7.1.1-5_mips64_octeonplus.ipk
Size: 5577
SHA256sum: 020b1c74640cb8ac2d259bff41ca95a7a45a0f77cc2bbf795ac1ad819a3b53e9
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 25390
Filename: bmx7-tun_7.1.1-5_mips64_octeonplus.ipk
Size: 25972
SHA256sum: a395d913fd049d9f89aaa43f1b93fc76077042f6b08de3896408da736c577c00
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 8263
Filename: bmx7-uci-config_7.1.1-5_mips64_octeonplus.ipk
Size: 8985
SHA256sum: d3684fcb2cfe007222f479e612d663bbb9837bf88b957a382286a5ef99ccd15f
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 168182
Filename: bmx7_7.1.1-5_mips64_octeonplus.ipk
Size: 168485
SHA256sum: 1dfccf6179423eeef8bf219fd6e38cf759326dbb1a0f9518ea4c494f3cf38a6e
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 329571
Filename: cjdns-tests_v21.1-5_mips64_octeonplus.ipk
Size: 329551
SHA256sum: 4a605b158aff10aca6957c3ec111a1238cb76d7281490ef6bf546efebf25cf3e
Description:  cjdns test cases

Package: cjdns
Version: v21.1-5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 384982
Filename: cjdns_v21.1-5_mips64_octeonplus.ipk
Size: 385320
SHA256sum: 7ebc644d2644db95f1b4dae48c30a91206afab22a8e957a65ccaba485c593271
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mips64_octeonplus.ipk
Size: 1394
SHA256sum: 9d8068860772ca2e6af5f3d8eb2f0440c41f90da06a87842c62f1038529a5598
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_mips64_octeonplus.ipk
Size: 934
SHA256sum: 053fa3d2761677b4b8828e89ccc567836b65c9cd458ec3952d88bdf2627d2db6
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_mips64_octeonplus.ipk
Size: 921
SHA256sum: 5606acd6e87fae2e82ede9b9a30dc5b22f0cc8a1d8a58f4825292a06138d89d5
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 108114
Filename: hnetd-nossl_2018-12-21-c4376661-1_mips64_octeonplus.ipk
Size: 108799
SHA256sum: 6f90a32bb60e773786ac7d550ee3323df2e8164cd24bad97d8395cd8fbdd67ff
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 119331
Filename: hnetd-openssl_2018-12-21-c4376661-1_mips64_octeonplus.ipk
Size: 120196
SHA256sum: 3284c200f375575c9148252064985414edd053fbf06d9e0ebf1894056850ebb0
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mips64_octeonplus
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_mips64_octeonplus.ipk
Size: 6558
SHA256sum: ae4ad0239102c5e50b87e80ed8cc316ace768360e1fccd103e9795970f4e4359
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips64_octeonplus
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_mips64_octeonplus.ipk
Size: 57614
SHA256sum: be6489bd5903249f2810427554c37ec6cba52c2b6882eb822cdb1562025a633e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 137500
Filename: mcproxy_2017-08-24-93b5ace4-9_mips64_octeonplus.ipk
Size: 137913
SHA256sum: 1c8cfc3da872930c54002f6a8e6e0deafdd43c3f01fe7b5f154df6d11aaaa39a
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 7367
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mips64_octeonplus.ipk
Size: 8329
SHA256sum: 64bb41e56add6766102d4a81d92afa514d083c1b5d3740a4323a5b0e0d24ce66
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 39882
Filename: ndppd_0.2.5-2_mips64_octeonplus.ipk
Size: 40866
SHA256sum: eb7eb37b83aab25a30ce632b5c2826d1df2e0a9d86ef0d8bac0d5210755c4032
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 49931
Filename: nodogsplash_5.0.2-1_mips64_octeonplus.ipk
Size: 50644
SHA256sum: 92704ad5d84fc92f952be1c81b7b0b59abfb41c44156e8db52c3f1765940b005
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 12410
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mips64_octeonplus.ipk
Size: 13048
SHA256sum: 1a86a118c879097ef11006846f95ea3707035621c569e311d976bc493c0d5091
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 2115
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 2775
SHA256sum: ed09338bd359627b92f8f6bb59fc3b43586cfa4dfd38df67f65a98c0fdac03b6
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 12112
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 12854
SHA256sum: 9248fd466fc62c9d49d9228375ccb8616b5c83e3d7329123883263a697b72863
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 3870
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 4484
SHA256sum: 698e3e0be1c2275d69bae0d447ea79f76b90cff0ae326828789d74faf484d3f1
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 2453
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 3087
SHA256sum: 7be50c89a36acdceab6edbcb137225d26b24ece34bdd7a849d8535648f644a56
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 4314
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 4933
SHA256sum: 6147c8603af91740acf2eba9d28008d33ef7f76b400637fd72ed534363ecacc0
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 2716
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 3343
SHA256sum: 327d9b0882aca33aa4d441b92638aa5ee6ef6a237a22e1ce8924517563f52ac7
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 30848
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 31360
SHA256sum: 191af75d01ef5238e018904a587146207f94b94146e1835dbd6f3dc6476e65c4
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 20988
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 21688
SHA256sum: c01f5c0a0cb84cc5a6d476f442b6a5fb475c6233c07071a7607bc65f35fea9c8
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 8923
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 9575
SHA256sum: 5d22e0ed67c1ed9d029c84f303045f436b0b7f42102581e67da03316eb369d1c
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 11178
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 11780
SHA256sum: 397e26daae6656290cfc6979e0a8a96af6a2a0fce7d22f502c1f838942773938
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 12648
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 13267
SHA256sum: c948db322127ae378e629abc74100bf61629d11066d46c1651c648c59b0022d9
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 8630
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 9270
SHA256sum: ccc82bc6a89a8b197ed62881353b1a84d22f07f9c05f1c3ca37b911f40761aa3
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 3029
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 3660
SHA256sum: 676714ca7500f46d33737d3da32d9370eae1ef7112b5bef512abd66f27fe0c98
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 58090
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 58625
SHA256sum: 8d329240d046e4cf2b456ca7e6d3ebf83aa79a2dfe08be19a6cca35ad91d76c7
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 6247
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 6967
SHA256sum: 4e69e52f86a66c798dfd980086f872659737ff98d520a9daf110c41a4d47685c
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 10248
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 10943
SHA256sum: c5f55831f144c1a3d4dbf15ef5ffcaa2203b3a0d5581e36089a8ef1ac4bbe97b
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 4530
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 5194
SHA256sum: cdcd1902696e5e3c0c96285432fa903c6aefce275372466f3efc3d42f66502b7
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 14560
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 15157
SHA256sum: 4d564777b938eaf139861b05f090884b6fb770180aa7319564b0cfd88db89f56
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 1760
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 2427
SHA256sum: 82410f5b470c81a1bc237fe59938888b4a9073b5f695a362d5d3637403f871b5
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 1934
SHA256sum: c48ed43ad6117761ef517c399d66203c1205f9aeed537fec139f392524a2d535
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mips64_octeonplus
Installed-Size: 135270
Filename: olsrd_2023-06-12-a9b3f1ac-1_mips64_octeonplus.ipk
Size: 135738
SHA256sum: 46ec2b961ca4af863d6d7370cb6a809ed5e4ceb0a2b46274db634ebd45643691
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips64_octeonplus
Installed-Size: 168372
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mips64_octeonplus.ipk
Size: 168891
SHA256sum: aea134fade70e4aef9d8950e51eb61baad308ef3e41ea8fc00904b306a86917e
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips64_octeonplus
Installed-Size: 164052
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mips64_octeonplus.ipk
Size: 164494
SHA256sum: 93759d31805f9b5d8abe71219a3c3e29586f519ab94b4d71b3fc297f0ef6acd9
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mips64_octeonplus
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_mips64_octeonplus.ipk
Size: 2279
SHA256sum: 4915fbe204032402d8c4b1e937bd3248c299449156ca2518be548b7dfd2eab8b
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips64_octeonplus
Installed-Size: 244630
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mips64_octeonplus.ipk
Size: 245036
SHA256sum: 8a53f47f6ffcbb8c73f23f7b7c449027c47944a8a81f18c3925044047399912b
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mips64_octeonplus
Installed-Size: 161799
Filename: opennds_10.2.0-1_mips64_octeonplus.ipk
Size: 161287
SHA256sum: 342b81f1b7d18edd645e81db7449e39a603098b0680ffc2cce99a15bb23881a3
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mips64_octeonplus
Installed-Size: 88327
Filename: pimbd_2018-06-19-dbf4e591-4_mips64_octeonplus.ipk
Size: 89099
SHA256sum: d8d1054a3b5ff436d97237a6f81ee3d1ad21a5bd52a41d94979d77ec79f893fb
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mips64_octeonplus
Installed-Size: 34443
Filename: prince_0.4-3_mips64_octeonplus.ipk
Size: 34985
SHA256sum: 20ba52a8db99cef1e54405f6ff9f458d2a656848ce469c8588a5d8dc7968e4c0
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 12181
Filename: vis_2013-04-07-7710cce4-9_mips64_octeonplus.ipk
Size: 12790
SHA256sum: 822a0820f9b0a1faa69ce5b29589b1aa68bbee2cd428b59313560491c43e2ef5
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: mips64_octeonplus
Installed-Size: 10023
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mips64_octeonplus.ipk
Size: 10740
SHA256sum: 16e46103931881917a1c241e2f68b9e0a0511d118cf62651dac443e8b1ea6694
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.