Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 22003
Filename: ahcpd_0.53-3_arm_xscale.ipk
Size: 22794
SHA256sum: 0d7dc22d12ccd8d707ef1402258c2130cd8e056fcca168655f640b3538779474
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: arm_xscale
Installed-Size: 24941
Filename: alfred_2023.3-1_arm_xscale.ipk
Size: 26132
SHA256sum: 58ddd53ac85ffa8ee0acca2026d2a61f44fdba2825da827cd1cf87505048c271
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_xscale
Installed-Size: 3822
Filename: babel-pinger_0.1-1_arm_xscale.ipk
Size: 4605
SHA256sum: dfd4f64ec58e24a52194fceef0978c59955f16bcc8f3789284fea82907bbffda
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 62726
Filename: babeld_1.13.1-1_arm_xscale.ipk
Size: 63851
SHA256sum: 5745a2f86b1e211464e6e9e1a406117df1c9b84f9e39adbb5dc031e6c84ad0e6
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_xscale
Installed-Size: 41929
Filename: batctl-default_2023.3-1_arm_xscale.ipk
Size: 42871
SHA256sum: 4643b312e11859ebc80e39a50a5affc2dce51f10c87465f7376db4b8fd951b51
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_xscale
Installed-Size: 49130
Filename: batctl-full_2023.3-1_arm_xscale.ipk
Size: 50126
SHA256sum: 53e2f5ec91bf6d0a10de6e4b1d200633ccee778c9de17ef5ac60cdff956520b2
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_xscale
Installed-Size: 13759
Filename: batctl-tiny_2023.3-1_arm_xscale.ipk
Size: 14746
SHA256sum: 0581a85bd22bf156c4a1052f37f782505ddd48bf10540d86505e36711f2a8208
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 42392
Filename: batmand_1440-1_arm_xscale.ipk
Size: 43153
SHA256sum: cdc12e6f534416fb9ca03c902aa954abfa9d0b974fefd58c6c4c64001d0a5271
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 383749
Filename: bird2_2.14-1_arm_xscale.ipk
Size: 382898
SHA256sum: 09f2ab21b47ded0239033997358425a846f24520104162d355a18c02457bff25
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 8670
Filename: bird2c_2.14-1_arm_xscale.ipk
Size: 9750
SHA256sum: 7605088dbc54517b7202e86ee447aedd21fcce8d64e509e779fc9cd39f0dd271
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 7403
Filename: bird2cl_2.14-1_arm_xscale.ipk
Size: 8442
SHA256sum: 9c6a0e76c7a65fbc3d52f61ad60855df42af665404993c2b57b9c22bfa388116
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 4017
Filename: bmx7-iwinfo_7.1.1-5_arm_xscale.ipk
Size: 4778
SHA256sum: d903a3c86dc98bbff512feafa718edf14258214d6d26ecc94437778e1baf8bf4
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 7710
Filename: bmx7-json_7.1.1-5_arm_xscale.ipk
Size: 8509
SHA256sum: 2ed7c0ecc83fb431fff685d726fe266c2117fc5e83231782d415d2b369f91778
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 5369
Filename: bmx7-sms_7.1.1-5_arm_xscale.ipk
Size: 6119
SHA256sum: c798674d15b1ae7465528880fa2e3ff3587dd6efd8ae9e0314e0ac8924b2be9a
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 9491
Filename: bmx7-table_7.1.1-5_arm_xscale.ipk
Size: 10267
SHA256sum: b7afc2c15c8d5f1674eec9449045f91a1bf1806861a3c640936d85b2a0c129ea
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 5026
Filename: bmx7-topology_7.1.1-5_arm_xscale.ipk
Size: 5747
SHA256sum: 125ee2790a804085197fea68d8402eb74b25f470574ecb5ed034e2ab1828ff86
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 25793
Filename: bmx7-tun_7.1.1-5_arm_xscale.ipk
Size: 26544
SHA256sum: 62c207dcb7758db77d6919d9d5216cba5969751c4de7ce30685832b96ef80a86
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 8080
Filename: bmx7-uci-config_7.1.1-5_arm_xscale.ipk
Size: 8925
SHA256sum: 8cdd470203901822b6e8f5c56c80cd5c0265c356f0325fbdee6726568cfe07f9
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 175543
Filename: bmx7_7.1.1-5_arm_xscale.ipk
Size: 176157
SHA256sum: 2efb1348a370647f54933b1f0fc5184ed4193d0c803baf6b9207cb5ad7e7314e
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 345941
Filename: cjdns-tests_v21.1-5_arm_xscale.ipk
Size: 346151
SHA256sum: 360cf01593f31c750cd6339d151c0ef336b965e8d9fb8f80d689a02f46d4f5f0
Description:  cjdns test cases

Package: cjdns
Version: v21.1-5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 399456
Filename: cjdns_v21.1-5_arm_xscale.ipk
Size: 399963
SHA256sum: 4c1b2b205a0acfae4aab34b1b3ab17c549a77118d81d3945cec5e98da0e7561c
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 1391
SHA256sum: 6a8eb892e78ff03602fafa2cd1914622d0768fdd42ccb4ebfc40f6df96b3f3b3
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 933
SHA256sum: 4efae2fb07b867bda9b6e3eba35e3f41d11a0fb9c739bb3cf23c04c416551b9a
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 917
SHA256sum: c1ce0163f9bb6296e943542b502495fb129f8c0a319b1605bc5dd1f446473882
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 94311
Filename: hnetd-nossl_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 95299
SHA256sum: 94aa427906abfa227984becea594c00f28a8b4163641480df703429fd12bd655
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 104113
Filename: hnetd-openssl_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 105005
SHA256sum: 997ec544c0e7b23404d3972a958a823481bcef68d24d7c996c4abc4dfc2cb24d
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: arm_xscale
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_arm_xscale.ipk
Size: 6556
SHA256sum: b4fae8e6cbdfde9603ea7c42beb90b8ea3ab5f312ee21f4cf6d76a6580937f51
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_xscale
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 57613
SHA256sum: 3f0adfbf5ec18d4fd1fa1a38e867d4f3a27ff57a916a74adac5b76dd8741495a
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 121947
Filename: mcproxy_2017-08-24-93b5ace4-9_arm_xscale.ipk
Size: 122815
SHA256sum: 613d39cd1af8b9eccd2e17c7397e0c43498a7c44d50604a743445ca46662deaf
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 6159
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_arm_xscale.ipk
Size: 7225
SHA256sum: eb3b3f0a254c370212923488e347ce6f5c1bb6ab862edcea3aa4b3e60a320ef7
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 31409
Filename: ndppd_0.2.5-2_arm_xscale.ipk
Size: 32300
SHA256sum: 9a3204637e153e711250f6ccd51e143f6c572472b9f04f58238ef92e01aff3ad
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 46612
Filename: nodogsplash_5.0.2-1_arm_xscale.ipk
Size: 47582
SHA256sum: 9368879e3804b14731552c48278487b8afc3f6b6133d5590a5549355452c28f8
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 10263
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_arm_xscale.ipk
Size: 11126
SHA256sum: 03143b4a3df6e5865773869c9a913f4adff27d0faf9feec3e6e53226183b5825
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 1977
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 2750
SHA256sum: aca451d27611c0aa76be6e05428f2533da94b6d6cdde6671cbf8ad6090b0cf7b
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 12289
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 13023
SHA256sum: 3cb6301d1710b5e0cc89c843ea0b7838b2fb7e9413998aa77d15e42402df27cf
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 3797
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 4540
SHA256sum: 541aa0e0e20b1ee5e35fade3f3a89cee2c6b0ac6e26cb241e06e2146c4971a5c
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 2294
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 3036
SHA256sum: 4d2d68c8d3c79603b55120c5f60fc81e6452d67095675993ab72fddbeb46a7fe
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 3985
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 4724
SHA256sum: d0e50a0e9e3add89574c20216f30cc55feed5535e3bc40f8fbe044e780e6d741
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 2527
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 3257
SHA256sum: ea0cc0a87c9cb549a103e1b359288c2ac29e438eabc3828afde9567af21a1f0f
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 32749
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 33586
SHA256sum: aac9550a105f9d310b7a148dc97b3c9c280a6e4aed511fc95ada4b7ff0f41056
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 24671
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 25416
SHA256sum: 132ebc85e1f5c8cc1fc88eafade77f476672f05ae0486fd8659889d6b9a2d489
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 8999
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 9768
SHA256sum: 0420275025ed008698e3d99bb190818f61c8db409845753dae6474b37a849474
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 10943
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 11725
SHA256sum: 1124d987fb41376d1960e32fdca407e8b9e721964e28276fe2716ebb081530ea
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 13759
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 14482
SHA256sum: 24632a9913042f28022eb417fd3bd43912cb974a9601f38a2ba7b8dbc378f7c3
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 8258
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 9062
SHA256sum: eea42bcc9f2bcad9cdb5bf718442e7dcc0bcc5ee640963397fb5c8305218aedb
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 2863
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 3603
SHA256sum: fd0412679bb379cd266c39c13d485c28ed3e9ce8f1b90dc488f1bf0fd111d92c
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 61005
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 61594
SHA256sum: ed3b6a7f4ac05e5b83fb18196b5c7af346ccf14826d99227e811942328b0b8a6
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 6117
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 6857
SHA256sum: 87a3a8a53b67b8c90f3bb6ad5c4e766d1a5952e30033ff65218e3ce5f94c3823
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 10211
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 11025
SHA256sum: 0f915eb1b3f3b9e867735d1f06d009b6dd80255c6fe0febfa4b62c647c43ccb6
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 4264
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 5047
SHA256sum: c8c0f050bf92e1e46f3dfe0848d959cd38060e6fc766affd970a823e52110188
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 15810
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 16552
SHA256sum: 4b9d07ae61c759503bd97e065eed7303fe6752eea32775f27efa404ab1020cf9
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 1562
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 2315
SHA256sum: b6448fa5aaaa68bcd130c8077bcfc5e7594e0ae9333a62608c3ff51cd24ed6b7
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 1928
SHA256sum: 45bf1fa930a5347e9f55dfc9a82c4bca81e0e23021b470436c296e8ad02c4c8b
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 141375
Filename: olsrd_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 142223
SHA256sum: 0aa9a0174f94b6239063b6d466d988276a33f07bb3422ca7ba483fa323151b64
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_xscale
Installed-Size: 161214
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_arm_xscale.ipk
Size: 162081
SHA256sum: 6f1e389b04a44cca066ebb72624f6f60b16ec03c12620f6e10fd056b63cadb3c
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_xscale
Installed-Size: 157390
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_arm_xscale.ipk
Size: 158199
SHA256sum: 9b1cc89f95121378d3ff356582172472d7d19ed67b0f8419b9d3890b9d8ae494
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_xscale
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_arm_xscale.ipk
Size: 2284
SHA256sum: 94a6f310e7f90afc167479412f6b0b41a881dbb550ec8a16847260ecfe7f593f
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_xscale
Installed-Size: 234550
Filename: oonf-olsrd2_2022-08-25-1cec9b21_arm_xscale.ipk
Size: 235170
SHA256sum: 2cd748eda61348723dd80920eeea9f0bb7240c3c3cbd11f3a0f3929c401fe93b
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 160156
Filename: opennds_10.2.0-1_arm_xscale.ipk
Size: 160376
SHA256sum: a915100830aa44c0ca0ab447d32a6c7bf0f96c10cf88369631c42ee13d0044fd
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 83071
Filename: pimbd_2018-06-19-dbf4e591-4_arm_xscale.ipk
Size: 83993
SHA256sum: 795837f521f10f4b643e9f55c7d690db2894b67bbc3143364db05fbeb659871f
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 26921
Filename: prince_0.4-3_arm_xscale.ipk
Size: 27941
SHA256sum: 2b5b64398d443b6f8935d326530219d00c9e21ae0eb3eef5a783706e244045ec
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 10277
Filename: vis_2013-04-07-7710cce4-9_arm_xscale.ipk
Size: 11100
SHA256sum: 39d370700909014049a9b305e474329d3003b0fca5ffb2ff80a021db25fd742a
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 8122
Filename: zonestitcher_2020-05-22-0dfef1eb-3_arm_xscale.ipk
Size: 8999
SHA256sum: b554281c7fe848eca4d39c7f46357b264a356bfcbe510164f27ef74edd1a9921
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.