Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 22038
Filename: ahcpd_0.53-3_arm_mpcore.ipk
Size: 22836
SHA256sum: afe0ec3cee8042a478c17dd5de402435514b451c5792a4fa6ea0eb7a490b452a
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 25098
Filename: alfred_2023.3-1_arm_mpcore.ipk
Size: 26287
SHA256sum: 9f7995256e878d7b28470069831d00cc39ac341ead06c4a9d8f986892bf7f50b
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_mpcore
Installed-Size: 3788
Filename: babel-pinger_0.1-1_arm_mpcore.ipk
Size: 4577
SHA256sum: 92545d183e7ecc93c6e4df4c82fa219a285bb049b3073c561a4013a9846c6243
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 62776
Filename: babeld_1.13.1-1_arm_mpcore.ipk
Size: 63908
SHA256sum: 76f10be2b4f30a98ab7d37826174195f689db15058987db4d172bc7ca7bbf19d
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 42030
Filename: batctl-default_2023.3-1_arm_mpcore.ipk
Size: 43054
SHA256sum: b0945688141e4c44da9166cbaa566250f21c1e21907e95d85ff1a3588afb7ecd
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 49358
Filename: batctl-full_2023.3-1_arm_mpcore.ipk
Size: 50331
SHA256sum: f4392feab7fdbe01a5a8f1f7e9259eb984e8379165a81c3448f092e113a41359
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 13744
Filename: batctl-tiny_2023.3-1_arm_mpcore.ipk
Size: 14721
SHA256sum: 90edb198622aad651cbf7376638c312d23a8d23cd955127986defdbcdca20f17
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 42368
Filename: batmand_1440-1_arm_mpcore.ipk
Size: 43199
SHA256sum: e604efe53fc759206b9ff40173c73327ffabe5b45a355675e90a4e652f2d48d9
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 382784
Filename: bird2_2.14-1_arm_mpcore.ipk
Size: 381977
SHA256sum: 1de4b5ae44d7a4be36ba1fe143b9bec7d8fa107614aab55e17f53ba07b072001
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 8674
Filename: bird2c_2.14-1_arm_mpcore.ipk
Size: 9786
SHA256sum: e3d954c4c922d5a92777ca223241a30dfd06f644e1ab1f8f095494622148a6b1
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 7405
Filename: bird2cl_2.14-1_arm_mpcore.ipk
Size: 8438
SHA256sum: b64044f012f27bc605a19d35526740dee2130dc955ba94c93f07d6a8c6bc6ad6
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 4010
Filename: bmx7-iwinfo_7.1.1-5_arm_mpcore.ipk
Size: 4769
SHA256sum: be244ea7c95a9dc966ec05235b79a2021be9b8588ceee1ebb99b307174c425f0
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 7709
Filename: bmx7-json_7.1.1-5_arm_mpcore.ipk
Size: 8515
SHA256sum: 3edc2d852fba673f97f6e63c1cd87e0710c2cc9d75ceeeb764501284c9f42217
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 5408
Filename: bmx7-sms_7.1.1-5_arm_mpcore.ipk
Size: 6159
SHA256sum: f3ebd341b2200b243fcedcfe8f81c47f24c3e05ceaeb7ef74f8cafb64a5b965b
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 9631
Filename: bmx7-table_7.1.1-5_arm_mpcore.ipk
Size: 10402
SHA256sum: 3c49f592fd94f894acdfd0752eabb7824657112fe21c40a7975550a71a9aaccf
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 5034
Filename: bmx7-topology_7.1.1-5_arm_mpcore.ipk
Size: 5755
SHA256sum: 6d7d0c6d7497c75e4a604171753f529d8c64b1c6eeee2e794b7bd9597775942f
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 26163
Filename: bmx7-tun_7.1.1-5_arm_mpcore.ipk
Size: 26837
SHA256sum: 7aa8abbf67bd126435113ba4d04ba8197389dc1d979e55eaf54a3fe761031170
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 8083
Filename: bmx7-uci-config_7.1.1-5_arm_mpcore.ipk
Size: 8892
SHA256sum: 411d280680aa11782b607b742c4704955fdc2dd8bafa6d58f7f88bdfb808eb93
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 176120
Filename: bmx7_7.1.1-5_arm_mpcore.ipk
Size: 176832
SHA256sum: 7a74c931eb278b4cda39458fdb7d4fbe708b0c1de21e9033c4b8d646c33b0ba5
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 345054
Filename: cjdns-tests_v21.1-5_arm_mpcore.ipk
Size: 345201
SHA256sum: b74dd5b22cef1e91e22dfb12bf928f747cbf3b55632701b4e5ab8b1ba990eb25
Description:  cjdns test cases

Package: cjdns
Version: v21.1-5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 398888
Filename: cjdns_v21.1-5_arm_mpcore.ipk
Size: 399255
SHA256sum: e1d8a7a510835b68285a76f87e6439c876a4786d8f190bfc7309017ff4d8bad1
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 1389
SHA256sum: c20f65ad29b32354d8eacc64815b4574f1b8550324b43f987360d784e6d4ed18
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 929
SHA256sum: 0a1563dd83fb2137723b8fcc75250cde847a3829e0027cd8b05a548906669f7f
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 914
SHA256sum: 41ffba241251763f68f876f6f62f783c11934981e64b957dd71e1d68b6349f5c
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 93782
Filename: hnetd-nossl_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 94748
SHA256sum: 2dcad1a91c92cc6d887b64ebc13d03869e0be8a8100056cb3b9910b93fe99285
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 103545
Filename: hnetd-openssl_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 104445
SHA256sum: 476d4b91a6b4767bc417ef14c380c0b3ef98df6cc0d4b936b6b19bd036068ee9
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: arm_mpcore
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_arm_mpcore.ipk
Size: 6556
SHA256sum: 75fba7505194e63d0b000f543b40545b35e9648d8f1d02aa505bf51e3b95417b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_mpcore
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 57615
SHA256sum: 12f4f17b22cb2fb4a6ee1351c9f9c25eb3aeb521d7db49f5679ec43a4503f0e3
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 121218
Filename: mcproxy_2017-08-24-93b5ace4-9_arm_mpcore.ipk
Size: 122142
SHA256sum: e1b1ef0fcc6ffe9b6b68e26d2b5368ec6a7748f785d5ed4934921e5e31e89801
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 6182
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_arm_mpcore.ipk
Size: 7248
SHA256sum: 225c43ef32f3278034677c0339334b289e793cd09b84565ebdd40cbade316d2a
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 31469
Filename: ndppd_0.2.5-2_arm_mpcore.ipk
Size: 32362
SHA256sum: b790a47ce7b4d5751b1dc30e1a68a56ac1c0a3f725237d2109920c7921bd93fb
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 46620
Filename: nodogsplash_5.0.2-1_arm_mpcore.ipk
Size: 47613
SHA256sum: 23604bbd5b4f5c654ab644b3a9699e0b84ab0e7b8d7afffe02de58aada1a104b
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 10264
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_arm_mpcore.ipk
Size: 11129
SHA256sum: 3eec54e26d4d4fa03d03990c724fa657c272ec5f4e5ecd04233c2df315e4f7b8
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 1967
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 2736
SHA256sum: 7d2b913c2fa5558f4fe0db103752dc96c8de1b1a424eae2c8443195bd706f476
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 12164
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 12950
SHA256sum: b1c5b4f238951d60c079c3a8c509a978cbdc2d2cd503a98aad6d39c9a773aa2d
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 3790
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 4535
SHA256sum: 9fcb1e1c317e433b80012e7563378dbadc83bd108bddda0507df898ecaed3c12
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 2298
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 3040
SHA256sum: af136c074676a23fdc9301ab3e82062c14fe7eabb89f8cc77a219853ae3c9308
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 3988
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 4725
SHA256sum: fd269264535e30047808b4846066094cba6953e5df6164d0cfe0c422604d399f
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 2526
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 3257
SHA256sum: 721a7f3225f865bacaa4f1d65098a9e61260ecf0e3e940bbbbd533b4b568b6c3
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 32751
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 33583
SHA256sum: 3b331f371709cdb2f9993b18b136232030eabe6223ef7f4fbaef8e10882203af
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 24641
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 25379
SHA256sum: 995f55c7c530436c8f864df0efe360f4c8a0f85193cb64082870c5f11c5caea0
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 9068
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 9838
SHA256sum: dda1bdd5b7ce36b18dc64c5d3ef256fcf8312a0cc2cdf9df6c12eb91df58f436
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 10926
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 11699
SHA256sum: 6293b95467080ce917ea0593b59aab5e4302295bff17d371a5c62e0e7396b7d3
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 13727
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 14456
SHA256sum: c872fc591dd9334a56e3e3d1f79650542d9b790a55a66181e2d4fa4878350093
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 8277
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 9077
SHA256sum: 02dbcf0aeb2dceba53a0500ab479f8c1f9d0465adf131614fe4cae30a1665c18
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 2872
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 3612
SHA256sum: ae76588750cdca065e3387ee32a11c013134bcef74f039e1128eaa92815624a0
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 61149
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 61912
SHA256sum: 75fbad6b7e87ee2d6ddb4233adbaa9e4c8f464c84ec1ae0a14286ee8efad9271
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 6104
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 6844
SHA256sum: 44561745c7d5b95e3d1b476b56343feb60d78fdd3d3bcaeedc0a76f8ba5c3f5a
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 10389
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 11201
SHA256sum: 50677909c4e72bd0e44939f77a6f51b70a3a6102041b8d7fca9b43afd774d826
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 4271
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 5046
SHA256sum: 39d7f68be7adf185c1575098d043cac1f7344aebaf2f63ea78fcb96aafc5d33c
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 15805
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 16548
SHA256sum: 07e39bd8e21f3d58d5ddb2ab1cfd63c40684ca14a88a58dc4f2e56a80733d754
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 1565
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 2312
SHA256sum: d5abdfa1e302b8af9b7facf71b16cbf1adfe2bbafb62ce244eecc0817d039e2f
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 1926
SHA256sum: a5883f12706cfe5ad66f0eb5be94984ea1334b7f284dbb524b38a7f19060b358
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 141291
Filename: olsrd_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 141879
SHA256sum: f104d4d8fa37adfcf46d0837a2a044ff2c4698d89a63174500307d048ae52d71
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_mpcore
Installed-Size: 162201
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_arm_mpcore.ipk
Size: 163016
SHA256sum: ccc3c933b424a31f53bea656da972e3dc66cdf86e8ed49ac6da1a8b8e0e0fefa
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_mpcore
Installed-Size: 158016
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_arm_mpcore.ipk
Size: 158757
SHA256sum: a59b6835a9b685f77d01b0019ccee4db43e59d1b54bc8136d0ea05b737df1bb5
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_mpcore
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_arm_mpcore.ipk
Size: 2276
SHA256sum: 737da636068a3b0d4f1aa16a8723fe823d173f53ffecebce078f8bc2f4d2c344
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_mpcore
Installed-Size: 235691
Filename: oonf-olsrd2_2022-08-25-1cec9b21_arm_mpcore.ipk
Size: 236365
SHA256sum: 8834a8108202b66d5b0d3893731d31d5a9050eaec92b30386c5e4348ef94ec3c
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 160243
Filename: opennds_10.2.0-1_arm_mpcore.ipk
Size: 160424
SHA256sum: 5504155016479427739fa9d55bd6c14a2bf6fb872a0768e27351aa862924035b
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 83206
Filename: pimbd_2018-06-19-dbf4e591-4_arm_mpcore.ipk
Size: 84081
SHA256sum: 00d7b02dd3d892f17f4cacd566321d118bc6c4cbdb6a3beab86d3d684ed3a512
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 26899
Filename: prince_0.4-3_arm_mpcore.ipk
Size: 27921
SHA256sum: a75252a62e17d155e271219031745d64ea3e65c5855d403098e0932b016e2ef4
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 10306
Filename: vis_2013-04-07-7710cce4-9_arm_mpcore.ipk
Size: 11129
SHA256sum: 68d261cf70f9644f1405f1694e95c7fc93014501c3c949851fa5611df446e024
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 8130
Filename: zonestitcher_2020-05-22-0dfef1eb-3_arm_mpcore.ipk
Size: 9017
SHA256sum: 7061544a22d580ed92bb1721e03e91114f6b6cc75111a0bbd1d1ae9b4b525d60
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.