Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 22035
Filename: ahcpd_0.53-3_arm_arm926ej-s.ipk
Size: 22909
SHA256sum: 590d7f80570338a6a32e930df661e7dd5003c4abfac2de54f4766f852c4f00b4
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 24892
Filename: alfred_2023.3-1_arm_arm926ej-s.ipk
Size: 26087
SHA256sum: b5c345c56034aeba8b93298a4bdef477f1b545eb70e8b356e2751f0f42a775be
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 3827
Filename: babel-pinger_0.1-1_arm_arm926ej-s.ipk
Size: 4617
SHA256sum: 7bf49b8adbd2ab4758c10a5adbb0b6ebc9e6883e3ee05689adf41071809a46b4
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20231128, libubox202312041
License: MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 62603
Filename: babeld_1.13.1-1_arm_arm926ej-s.ipk
Size: 63734
SHA256sum: f23fb96f142b9b4547bf4f15c92e86da8eff72bbd0a9ed90668d0846823e27c4
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 41840
Filename: batctl-default_2023.3-1_arm_arm926ej-s.ipk
Size: 42864
SHA256sum: 72baf2c87d9030da0a073385d0ecc88bea014aea8adf2f5eb3d0437227cf2860
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 49077
Filename: batctl-full_2023.3-1_arm_arm926ej-s.ipk
Size: 50139
SHA256sum: 83709c439d0634155a840f9810bc1a82d338b6084ea31540f13680c360692334
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.3-1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 13708
Filename: batctl-tiny_2023.3-1_arm_arm926ej-s.ipk
Size: 14664
SHA256sum: d7c4aff98bb4712105af3a9cb42a4a97d54be006162bacf317ea92c76de5eef5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 42413
Filename: batmand_1440-1_arm_arm926ej-s.ipk
Size: 43213
SHA256sum: 135b3808c761f41a8481389ce87b2d61e9b806d4789937b68ec55f0fdee900cb
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 383406
Filename: bird2_2.14-1_arm_arm926ej-s.ipk
Size: 382517
SHA256sum: e4282aac48b8cebc282b972195585e4541d2e2c4be0385add0a6d1eab3e508b2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8675
Filename: bird2c_2.14-1_arm_arm926ej-s.ipk
Size: 9748
SHA256sum: 03fe8482ca9a36f1e381dd1d49e05e44ef34d88715d5d1a7b54d2d7f92c129f5
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 7412
Filename: bird2cl_2.14-1_arm_arm926ej-s.ipk
Size: 8453
SHA256sum: 2af9a6402ed1e53bcc8a7c78b04a1cb587c7210f3a5a8097723318685afd5b3f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 4010
Filename: bmx7-iwinfo_7.1.1-5_arm_arm926ej-s.ipk
Size: 4774
SHA256sum: 3518987a65d9dab5aa768f4b0b672282a9697e82106dff878ba72287d20a1e45
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 7694
Filename: bmx7-json_7.1.1-5_arm_arm926ej-s.ipk
Size: 8497
SHA256sum: 7baeb521f3d5ddc5e201df9fe58c7c67f6eaa9f617b6a09f947ec031808fc494
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 5383
Filename: bmx7-sms_7.1.1-5_arm_arm926ej-s.ipk
Size: 6137
SHA256sum: 21fbfe1c1eca9a517434b72c21de4ae7816404a91989f585feff2702e19fa20d
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 9501
Filename: bmx7-table_7.1.1-5_arm_arm926ej-s.ipk
Size: 10235
SHA256sum: 8436e2ef079d9147d49527d27308613f482e748f2b49fcdb122c8ad4419e00ff
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 5032
Filename: bmx7-topology_7.1.1-5_arm_arm926ej-s.ipk
Size: 5761
SHA256sum: c4c198db5f902a1260439fcf1fe4d21c8d212997421ebdb81e82437147658336
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 25790
Filename: bmx7-tun_7.1.1-5_arm_arm926ej-s.ipk
Size: 26555
SHA256sum: 2c5a950425512eb0351953048a3c0948c64d9cdd6689b68860c98bf950d4c24b
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8068
Filename: bmx7-uci-config_7.1.1-5_arm_arm926ej-s.ipk
Size: 8902
SHA256sum: d7dd6958de992abc6fc01a0f4f9859e355eaf6a590b3ac6c429c2c932c0c1444
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 175120
Filename: bmx7_7.1.1-5_arm_arm926ej-s.ipk
Size: 175723
SHA256sum: 95e9375b6193fb4d59478c6f6b0f66e160f7e9d88898310a53fec5c728c9e494
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 346195
Filename: cjdns-tests_v21.1-5_arm_arm926ej-s.ipk
Size: 346390
SHA256sum: 96d64c56a24885e32d7ae8a30cadf0b96d1c571715e92f47ebfebded8dc84f1b
Description:  cjdns test cases

Package: cjdns
Version: v21.1-5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 399592
Filename: cjdns_v21.1-5_arm_arm926ej-s.ipk
Size: 399949
SHA256sum: 78c005e64e4d3d8f1949ad52a920bd479a4f3bc3d246b9fc91ea1dfed7e49699
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_arm_arm926ej-s.ipk
Size: 1394
SHA256sum: e5a3a1f49c01cf37ad8250d2a7d1d978e9473d36c4a19e45c0c8477c22054fbb
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 97
Filename: hnet-full-secure_2018-12-21-c4376661-1_arm_arm926ej-s.ipk
Size: 928
SHA256sum: eb3930a94978523c3249c4ad514004a424c8e4fe497d43a45bf4995658df49cd
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 97
Filename: hnet-full_2018-12-21-c4376661-1_arm_arm926ej-s.ipk
Size: 918
SHA256sum: a30ddcd52ba434efd3d22928b894ab8a84895a597fe2a7b1d80afe5aec1c4190
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 94267
Filename: hnetd-nossl_2018-12-21-c4376661-1_arm_arm926ej-s.ipk
Size: 95246
SHA256sum: 27db542241ff407e71ba3f3ba5f2863cf2750f79bb027c85808a8e8da92d889e
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 104057
Filename: hnetd-openssl_2018-12-21-c4376661-1_arm_arm926ej-s.ipk
Size: 104947
SHA256sum: 083af5b818bdd32b4f969dcd3fe74658b307748ad25a3cb781e6453e22d8bd8a
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_arm_arm926ej-s.ipk
Size: 6559
SHA256sum: a39b4091710db2c84b5b537fd3b4e979d3ea9ffc2c2fab5eead40dddbda95b71
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 56777
Filename: luci-app-hnet_2018-12-21-c4376661-1_arm_arm926ej-s.ipk
Size: 57617
SHA256sum: 76e291c5660d5a221194403e13126d36ef370f34d55d7503d81f46891b4599d6
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6995
Filename: luci-app-olsrd2_0.2.6-15_all.ipk
Size: 7866
SHA256sum: 4a347460ff48f54c7f0380bb80d7810828414e792ba148c66bc71ed148003ce0
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 121941
Filename: mcproxy_2017-08-24-93b5ace4-9_arm_arm926ej-s.ipk
Size: 122921
SHA256sum: b2401aae14b3e1ab16a134e4102c01f1c72cb9115a1cfcbfc3ba435e0d6ddf37
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 2.0.0-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 5498
Filename: mesh11sd_2.0.0-1_all.ipk
Size: 6885
SHA256sum: bfdba4904870c87c1b513b3732d6b3611f0a631f668a0d73ccf9225f20cb7b5a
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox202312041
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 6161
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_arm_arm926ej-s.ipk
Size: 7232
SHA256sum: 4bd33800d4afe78eeffdccca32b3a915d994fe39e89a2d84191304493584b04e
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2849
SHA256sum: c532339d17ee4935287b9be0fe99fff3905c9d93afe2c789272fff205e5076b7
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 31428
Filename: ndppd_0.2.5-2_arm_arm926ej-s.ipk
Size: 32316
SHA256sum: c7cf024689cb014032e90b61eaccf35d3b0a5414e95509e037d452942a470143
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 46586
Filename: nodogsplash_5.0.2-1_arm_arm926ej-s.ipk
Size: 47563
SHA256sum: 0f88e7c9ada630a65b0b928899e81c788a5aa99748189feb27d7490515fd5195
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041, mdnsd
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 10269
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_arm_arm926ej-s.ipk
Size: 11125
SHA256sum: b5206521e890764573e26ed5c64d4e33aeadb688e0972c6b94c5a1348f78d794
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 1932
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 2705
SHA256sum: 291dc05a47cd501f69e23efe047d673d678fb5787a53f0c3124caf886a6995a9
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 12233
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 12967
SHA256sum: 5afb817675fd4f6ba2890e9e3e1413baa60cc0c8db484f6960574571cdf1222b
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 3793
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 4540
SHA256sum: 3def6bfaf2aa8a3c4df73a68e6b65e410222063a0cd85fec9a3a9f828a129992
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 2298
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 3046
SHA256sum: 6d629c9ca40842974f7c0872b8de62470bde16715c5d3ada39e49e213596561f
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 3977
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 4721
SHA256sum: 3e4c451cd8fcee9203ba759aded113f1ed0ebfb457934ffba821db94e923362c
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 2524
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 3258
SHA256sum: 0601bb5319cec43e6ac2d48794263924f4e0c7f603527a1a0412bc042b4710b7
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 32688
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 33540
SHA256sum: c2682b434198370d0977e48f78ecbfeb71c89d3f12fa052eeef7d3a038d1ce06
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 24571
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 25299
SHA256sum: 2fc8a88c24c8822107af13ea51c22f0fb2e5e7b9aff12fb76603656b8e4e8441
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8973
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 9743
SHA256sum: 5bdf09d62d3706e8bff1121b9cbfb8ede7fc9fbb45f998b918290c9873008307
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 10961
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 11751
SHA256sum: f08148725bf7cbda250cd054e317cfdc1c83912f1fbb308fb7c63cb34a3dd5c8
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 13690
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 14418
SHA256sum: 2ca31e0755943dad06ea103096db9ce7b3dc0dd0bab22001dd698a656c124680
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8248
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 9054
SHA256sum: e82b0291ac29387dfe7cbaf81cdd668b93a1c0fa7edb3665e7036c8c4a3cd6e8
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 2883
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 3629
SHA256sum: b29afbc2e551736db596b68aaeb1217a45411af3e6222185976245b7a656c8f4
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 61083
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 61782
SHA256sum: f8df112d6e36475addb7ecfac2c6579cbc9fabba0bf89c06484ac70e2ac8b83e
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 6078
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 6822
SHA256sum: bb1c68bc36197fd9b1b04fba215acfff6d78bb740b8f1d0968f3c61836171ae2
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 10199
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 11009
SHA256sum: 64f2510d35767aef9d9b9054677cac85a934e9c3afb1fecbfa0228a853c700a6
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 4266
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 5049
SHA256sum: 8c780910c3d4722fd66453ba457d64861f98e03a21b20d3bdd1ebb980da5b78e
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 15772
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 16506
SHA256sum: 6855a20ffdce8f0ff78d626867de4e9b6c91b12fe5203c6f89569e0bddd2a170
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 1563
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 2316
SHA256sum: e634894ade9f6224d5fa4be219f89e4924ca1d9406927aabc2c6386454982f8d
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 1180
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 1926
SHA256sum: 6319bedc88b9760c0c8e0efe6a93ada56917d82ab1db52ece164b78fa4e0eb60
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 141291
Filename: olsrd_2023-06-12-a9b3f1ac-1_arm_arm926ej-s.ipk
Size: 142075
SHA256sum: 0f5b3c8db63adeed2de4e4c9306c5bcf682c219241203a14cf28a66f5b394c0d
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 161373
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_arm_arm926ej-s.ipk
Size: 162117
SHA256sum: fd98a4c3e5f9aa51802be49d060e0908e9081d99ba2eda0f9820046cc9ee1173
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 157304
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_arm_arm926ej-s.ipk
Size: 158153
SHA256sum: 0995e3c3c835d4543acb7690dd006756a0de0376b7d52bc2d937a2d0289debcd
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_arm_arm926ej-s.ipk
Size: 2280
SHA256sum: faa05f3502fb9d55c3b66abcbddf0061d8d89fa1fc5b5cd24dde87dce25bce87
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 233900
Filename: oonf-olsrd2_2022-08-25-1cec9b21_arm_arm926ej-s.ipk
Size: 234557
SHA256sum: 8cfab99d877449921d444ddcdb5f650c66e5694ed72a9c9f0b425c6c7064ab5f
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 160126
Filename: opennds_10.2.0-1_arm_arm926ej-s.ipk
Size: 160269
SHA256sum: 25d377715624aa4f07ab9c7aae5ef17ad00744bc5ed89e8857fc62712b05d9b4
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 82918
Filename: pimbd_2018-06-19-dbf4e591-4_arm_arm926ej-s.ipk
Size: 83866
SHA256sum: adfd068814a57c8cbc9d237e5c58e6c33434d983b87ae818372687bcfadc0ae8
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 26722
Filename: prince_0.4-3_arm_arm926ej-s.ipk
Size: 27764
SHA256sum: cbae85f14ec81dc78df8e82ec7e75901e3fddf80d0ac39ee56ea1798cc69e381
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 10263
Filename: vis_2013-04-07-7710cce4-9_arm_arm926ej-s.ipk
Size: 11088
SHA256sum: 41c4912192eed22a9ba6e435bffd8e3c811d2f11c98ac855ee34c2a708b27236
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox202312041
License: GPL-2.0-only
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8122
Filename: zonestitcher_2020-05-22-0dfef1eb-3_arm_arm926ej-s.ipk
Size: 8972
SHA256sum: 902cae93eade3bf0d7d503da680484ce0e587d7c5d0c8455a7cba295d12560d4
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.