Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 21454
Filename: ahcpd_0.53-3_arm_arm926ej-s.ipk
Size: 22284
SHA256sum: ccfc9c555bb87b4843b7765b525b1c4b0c404ef1111310fb96d0cbb590c00292
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2019.2-3
Depends: libc, libnl-tiny, librt
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 24954
Filename: alfred_2019.2-3_arm_arm926ej-s.ipk
Size: 26079
SHA256sum: 0f1751f7c42b93e5555c5f5c96b44555c9dbebd33a87a529279be9bb9867d6c9
Description:  alfred is a user space daemon for distributing arbitrary local information over
 the mesh/network in a decentralized fashion. This data can be anything which
 appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 3825
Filename: babel-pinger_0.1-1_arm_arm926ej-s.ipk
Size: 4592
SHA256sum: 85eafb4fc2c7e055d7e826c46f5a1da6530622145d4f307901de94c2c241269f
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.9.2-1
Depends: libc
License: MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 55228
Filename: babeld_1.9.2-1_arm_arm926ej-s.ipk
Size: 56311
SHA256sum: 7b77d65cc9feded5f79139465975d992525bda4709a7d4dcb598e6760a98345f
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is in the process of becoming an IETF Standard.

Package: batctl-default
Version: 2019.2-8
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 41527
Filename: batctl-default_2019.2-8_arm_arm926ej-s.ipk
Size: 42450
SHA256sum: a3ad65dac848d4a2130782398cf5dd0e4f470030a486d8b813aead8ae647be05
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2019.2-8
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 48610
Filename: batctl-full_2019.2-8_arm_arm926ej-s.ipk
Size: 49516
SHA256sum: 1cbf371d35ea1b0333dc232eab82b9e7cba21ad6576c656c67a4d065be0eca02
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2019.2-8
Depends: libc, libnl-tiny, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 15165
Filename: batctl-tiny_2019.2-8_arm_arm926ej-s.ipk
Size: 16057
SHA256sum: a225bb9952da364a241c32f64b636e5fcc94b3fa3848e9a6677bfd54f1f1033f
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2019.2 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-0
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 39168
Filename: batmand_1440-0_arm_arm926ej-s.ipk
Size: 40016
SHA256sum: 1981b2fca6d99e4322f94d3d5f08d592e5a7c530404fb11da68ead6ec861683d
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-1
Depends: libc, bird1-ipv4, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 6732
Filename: bird1-ipv4-uci_0.3-1_arm_arm926ej-s.ipk
Size: 7708
SHA256sum: 54a232f42ede8cf5ab85b339336ac4091433668f0960c03c5879e40e0cc0b25b
Description:  bird1-ipv4 UCI integration module

Package: bird1-ipv4
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 199241
Filename: bird1-ipv4_1.6.6-1_arm_arm926ej-s.ipk
Size: 200403
SHA256sum: 78bce5ce32768e3311f8f7386a5147e79509e16068293a03c750a23047047199
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-1
Depends: libc, bird1-ipv6, libuci20130104, uci
License: GPL-3.0+
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 5896
Filename: bird1-ipv6-uci_0.3-1_arm_arm926ej-s.ipk
Size: 6804
SHA256sum: 90d773b56046ce7e171eba3986c84b5452f6e5b2e94664fe0cf35b76e5d4345f
Description:  bird1-ipv6 UCI integration module

Package: bird1-ipv6
Version: 1.6.6-1
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 229105
Filename: bird1-ipv6_1.6.6-1_arm_arm926ej-s.ipk
Size: 230112
SHA256sum: 80983ee366d803cd421f98609a75b25fdf5c16ec253e2870044267369adc30f0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8620
Filename: bird1c-ipv4_1.6.6-1_arm_arm926ej-s.ipk
Size: 9801
SHA256sum: 51ba22db2651d2e4fc9ec0f2b3d3995ff8e93e3f7c9db971b9b7d58459725565
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.6-1
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8691
Filename: bird1c-ipv6_1.6.6-1_arm_arm926ej-s.ipk
Size: 9826
SHA256sum: a98cd4643d8b3613997ed3b728f297e6aedb0ae6fd1c867dc9f116333f4a281d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.6-1
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 7938
Filename: bird1cl-ipv4_1.6.6-1_arm_arm926ej-s.ipk
Size: 9062
SHA256sum: 42576b032740181ce1579b607cc88e7099621be640a7ad47c0f0c9306df4f174
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.6-1
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8003
Filename: bird1cl-ipv6_1.6.6-1_arm_arm926ej-s.ipk
Size: 9127
SHA256sum: a5d016dfb46af6556d793e35b9afaec6eddcf8926552970e12f05523e0309f32
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.0.8-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 319290
Filename: bird2_2.0.8-1_arm_arm926ej-s.ipk
Size: 319954
SHA256sum: 07569ba8897e507e00817aff3aa363bddcca8341fed4f3b79a5edf71f594d981
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.0.8-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8575
Filename: bird2c_2.0.8-1_arm_arm926ej-s.ipk
Size: 9659
SHA256sum: 6a0205cab943a93f23917b318484dc332b7959e9a0110c856f52f33da9b4ef3a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.0.8-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 7298
Filename: bird2cl_2.0.8-1_arm_arm926ej-s.ipk
Size: 8324
SHA256sum: ea1dd3d37689a4b2b684ef4642331588bee59b9d891c3404dc52a6daa567f967
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx6-json
Version: r2018020902-5
Depends: libc, bmx6, libjson-c2
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 6325
Filename: bmx6-json_r2018020902-5_arm_arm926ej-s.ipk
Size: 7041
SHA256sum: dc151d8571928dc5d7051b2b04ca9e7a6caa95cd651b68a8e7069bb52f3745c2
Description:  json plugin based on json-c

Package: bmx6-sms
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 4855
Filename: bmx6-sms_r2018020902-5_arm_arm926ej-s.ipk
Size: 5537
SHA256sum: 5274e228fd97bcb41abe1f7808bd053be33a63c9e52d92ba9aee25a3af788589
Description:  sms plugin

Package: bmx6-table
Version: r2018020902-5
Depends: libc, bmx6
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8377
Filename: bmx6-table_r2018020902-5_arm_arm926ej-s.ipk
Size: 9118
SHA256sum: 3fec2c1b8c790094a1e0043a367933b8cfeb82d7f64a782b492c5c753939afb7
Description:  bmx6 table plugin to automatic announce routing-table routes via ip6ip tunnels

Package: bmx6-uci-config
Version: r2018020902-5
Depends: libc, bmx6, libuci20130104
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8320
Filename: bmx6-uci-config_r2018020902-5_arm_arm926ej-s.ipk
Size: 9123
SHA256sum: da77e279bd579d242b5c08ae62d80b120bb3da0286ca2153a4b03291c45cd6d5
Description:  configuration plugin based on uci (recommended!)

Package: bmx6
Version: r2018020902-5
Depends: libc, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 142174
Filename: bmx6_r2018020902-5_arm_arm926ej-s.ipk
Size: 142862
SHA256sum: 93aaa48fce7e0ee1f6f4522b3cece9d199ead3df08f52642d6ca97152b7f56fa
Description:  BMX6 layer 3 routing daemon supporting IPv4, IPv6, and IPv4 over IPv6

Package: bmx7-iwinfo
Version: r2019030802-1
Depends: libc, bmx7, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 4028
Filename: bmx7-iwinfo_r2019030802-1_arm_arm926ej-s.ipk
Size: 4763
SHA256sum: c5bd7adf8f2c5e8c240554b9e280cd4516e4ee1c0dea6bc1b2830991d16b9a8e
Description:  link characteristics plugin based on libiwinfo (recommended!)

Package: bmx7-json
Version: r2019030802-1
Depends: libc, bmx7, libjson-c2
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 7520
Filename: bmx7-json_r2019030802-1_arm_arm926ej-s.ipk
Size: 8291
SHA256sum: 75547566d073afe39a36f8ca1d1b3f1f5f4d9a49f137188dc0d9280181ce2a9b
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 5346
Filename: bmx7-sms_r2019030802-1_arm_arm926ej-s.ipk
Size: 6057
SHA256sum: 89d352d6ec7e28986ede5a0abfb4d8df1b009a81c39ea3752b194c4a0bbd411d
Description:  sms plugin

Package: bmx7-table
Version: r2019030802-1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 9370
Filename: bmx7-table_r2019030802-1_arm_arm926ej-s.ipk
Size: 10117
SHA256sum: d2e7e9aef37e08c41c436c5c27cd18be78bb38996bf8332a79718fc405125e1f
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2019030802-1
Depends: libc, bmx7
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 5025
Filename: bmx7-topology_r2019030802-1_arm_arm926ej-s.ipk
Size: 5714
SHA256sum: 5e6934f0745615c220f2056347c67a538c4c1c56000c53dad5d14e1a26532753
Description:  topology plugin

Package: bmx7-tun
Version: r2019030802-1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 25660
Filename: bmx7-tun_r2019030802-1_arm_arm926ej-s.ipk
Size: 26388
SHA256sum: 9fa826d8fed401ce2077a4e1d8e79ae997a3089172bedbd2dabeb5e9c106f90e
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2019030802-1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8023
Filename: bmx7-uci-config_r2019030802-1_arm_arm926ej-s.ipk
Size: 8833
SHA256sum: fbabf9eb6ef69ed0bb35158c49ad301700a081336ea7652358957e2a8750ba38
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2019030802-1
Depends: libc, zlib, libmbedtls12, libiwinfo20181126
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 172338
Filename: bmx7_r2019030802-1_arm_arm926ej-s.ipk
Size: 173191
SHA256sum: 8fe4fb2e6e085e3e61d336ee4c1cc7eef935c936f395b06a9bc643aaeb7633d2
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 20.2-1
Depends: libc, libpthread, librt
License: GPL-3.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 301434
Filename: cjdns-tests_20.2-1_arm_arm926ej-s.ipk
Size: 301224
SHA256sum: 1aacbc8211c50274848bb8e55fce830909d6957a5582266fc581ee20a4457628
Description:  cjdns test cases

Package: cjdns
Version: 20.2-1
Depends: libc, kmod-tun, libnl-tiny, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 382894
Filename: cjdns_20.2-1_arm_arm926ej-s.ipk
Size: 383042
SHA256sum: 19af559ada1e727672721ac006928e3d730b29241064bf3fc32ded09140d326d
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 545
Filename: hnet-full-l2tp_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk
Size: 1377
SHA256sum: 369b1ce3f8211b258520cc72eb086e236a722593f6782cd094b7005be0cfcb9d
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 96
Filename: hnet-full-secure_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk
Size: 908
SHA256sum: 922e5009e657a83e9116021a12643796897f6d43b92efd70ba0633ca72b9b1ac
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 96
Filename: hnet-full_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk
Size: 897
SHA256sum: b31acdda84cad012e1128b0db43b5fc7cef873742f2015d90a0ed3653934ae71
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 95254
Filename: hnetd-nossl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk
Size: 96113
SHA256sum: 397f00691cb30231ad216699bb6ab93d48afbcd8066bbd7e705ab8cdc8bd260c
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl1.1
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 104935
Filename: hnetd-openssl_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk
Size: 105862
SHA256sum: f9fbc3c04ea4c3ba832e77ded0ed6b7075a608e9692e73d0f154696deb1f3f78
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-1
Depends: libc, bird1-ipv4-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 7416
Filename: luci-app-bird1-ipv4_0.3-1_arm_arm926ej-s.ipk
Size: 8198
SHA256sum: b9a620fa0f23c747f223c1d2665a89eed6d5316ca5ce17f02004481ef7d7a5a8
Description:  bird4 application for LuCI

Package: luci-app-bird1-ipv6
Version: 0.3-1
Depends: libc, bird1-ipv6-uci, luci-base
License: GPL-3.0+
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 7459
Filename: luci-app-bird1-ipv6_0.3-1_arm_arm926ej-s.ipk
Size: 8232
SHA256sum: aebd685007163874dcc9a2b981978ecff54bd0914d9fd6a0023d87963ef9d1f0
Description:  bird6 application for LuCI

Package: luci-app-bmx6
Version: 6
Depends: libc, luci-lib-json, luci-base, luci-lib-httpclient, bmx6, luci-lib-jquery-1-4, luci-lib-dracula
License: GPL-2.0+
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 30305
Filename: luci-app-bmx6_6_arm_arm926ej-s.ipk
Size: 31102
SHA256sum: f695be2250a5db9a8c0520b9a093c2a623ebfc93bceedbfae23d5034d85a6aba
Description:  bmx6 web application (status and configuration) for LuCi web interface

Package: luci-app-cjdns
Version: 1.3-6
Depends: libc, cjdns, luci-base
License: GPL-3.0
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 5366
Filename: luci-app-cjdns_1.3-6_arm_arm926ej-s.ipk
Size: 6280
SHA256sum: cfb83e6c2adbbd5fd864a12b2934f186ca93042fe5c4eb798ff78d9555c51e17
Description:  This package allows you to configure and inspect cjdns networking using LuCI.
 
 Cjdns implements an encrypted IPv6 network using public-key cryptography
 for address allocation and a distributed hash table for routing.
 This provides near-zero-configuration networking, and prevents many
 of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2
Depends: libc
License: GPL-2.0
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 56777
Filename: luci-app-hnet_2016-06-28-606d7e904603ad8792ac1a7ba825618df97b5a4e-2_arm_arm926ej-s.ipk
Size: 57607
SHA256sum: c99730ab27c357da8db74de4f32544ea161571d419f4a052ba501b5de2531113
Description:  HNCP Homenet configuration and visualization

Package: luci-lib-dracula
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 23282
Filename: luci-lib-dracula_6_arm_arm926ej-s.ipk
Size: 23972
SHA256sum: 2cbdf56ca23ea06151012ee89bff48ce9fbf64a12414f955c0a56238ab267559
Description:  dracula graph javascript library

Package: luci-lib-jquery-1-4
Version: 6
Depends: libc
License: GPL-2.0+
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 24817
Filename: luci-lib-jquery-1-4_6_arm_arm926ej-s.ipk
Size: 25530
SHA256sum: 4cfe2fe4f703c742e0453cd6bf6f9917ae57cba6f74e272e72ada430944df7aa
Description:  minified javascript jQuery 1.4 library

Package: mcproxy
Version: 2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 116887
Filename: mcproxy_2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99-2_arm_arm926ej-s.ipk
Size: 117834
SHA256sum: dd03dbe4b845e7090d5c2b1fb96e3d46ba3c67b240ff0bf1cff8578f100870fa
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: minimalist-pcproxy
Version: 2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 6068
Filename: minimalist-pcproxy_2015-01-12-2d6d1b0b0a3b79a9b4a9b0a7606a84600a967bcb-1_arm_arm926ej-s.ipk
Size: 7080
SHA256sum: a8c7921680f33bab84f1bd33aa09f17cfa3e3f8aaa11e33e38af5d0b16d18725
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: mrd6
Version: 2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2
Depends: libc, libstdcpp6
License: GPL-2.0+
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 260433
Filename: mrd6_2013-11-30-c805eb33255dbc0b6647d463c6c67d1c9d3105a0-2_arm_arm926ej-s.ipk
Size: 261234
SHA256sum: ee085b43e423af42b25cefa77cd6b976b965a117f9e5e46374a4ac8c4c77b721
Description:  Multicast is becoming a major component in next generation networks, used 
 in several scenarios, from video broadcasting to multimedia conferencing. 
 In order to be implemented, new technology needs supporting hardware and 
 software across a set of devices and systems. MRD6 is an implementation of 
 a modular IPv6 Multicast Routing Framework for the Linux operating system 
 and provides MLDv2 (as well as MLDv1), PIM-SM and MBGP support.

Package: ndppd
Version: 0.2.5-1
Depends: libc, uclibcxx
License: GPL-3.0+
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 30701
Filename: ndppd_0.2.5-1_arm_arm926ej-s.ipk
Size: 31578
SHA256sum: c136b6f0c6738ddfb5788172a7dc645bd7e21df9711f0552e9854b58c88117a6
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 4.0.3-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash2
License: GPL-2.0+
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 58985
Filename: nodogsplash_4.0.3-1_arm_arm926ej-s.ipk
Size: 59941
SHA256sum: 003e4e387abf642a5262effc2989f34cc9aceb46bc17c79e3f50cc768f1e9d8b
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: ohybridproxy
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228, mdnsd
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 11759
Filename: ohybridproxy_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_arm926ej-s.ipk
Size: 12613
SHA256sum: e19739eff32703733cabaab37576b30f10da8cd7cc645cd15d643a5327bb5b91
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 1858
Filename: olsrd-mod-arprefresh_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 2608
SHA256sum: f66ba3ee74ff6a9a05e8a09b504e60b99ee6fa779a8b80deae635cb76bd1e250
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 0.9.7-v0.9.7
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 11897
Filename: olsrd-mod-bmf_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 12651
SHA256sum: 5bf79ac49d0915e96c64b3ad21ff057e2fff9dc54e8615d5322ef7014dac2745
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 3678
Filename: olsrd-mod-dot-draw_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 4395
SHA256sum: 5a802992c5551fabf30cf918e0c58cdfc39b01912f7620f43d5151292ee489c9
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 2189
Filename: olsrd-mod-dyn-gw-plain_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 2942
SHA256sum: 0877b414f8a82279b58eac176bef3f20409b0417e74df4d9dc213db5367b5c8a
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 3819
Filename: olsrd-mod-dyn-gw_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 4527
SHA256sum: 7dea25fde24b583967086af521c5a2affccd853f8618f2f1771086a8f29dd015
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-httpinfo
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 32378
Filename: olsrd-mod-httpinfo_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 33193
SHA256sum: 333377f568a36254d546f74be19c02298010c6cb7ee814d59cea38bf5e5e0b97
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 24242
Filename: olsrd-mod-jsoninfo_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 24868
SHA256sum: 1b8d816de5b9278c82eb26055515c40ade3731338ccd0521aa956dcdf113381b
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8764
Filename: olsrd-mod-mdns_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 9519
SHA256sum: 77fd0f10c34b6b7f4c12e843829c239b0c4d6e7d9c68b8020a2e6bb1009e1d53
Description:  MDNS/Zeroconf/Bonjour packet distribution 

Package: olsrd-mod-nameservice
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 10724
Filename: olsrd-mod-nameservice_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 11468
SHA256sum: 8ebaed17a7edeffde84894812df415e253e3ab7d1f0389a1fceb34a728812858
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 13440
Filename: olsrd-mod-netjson_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 14132
SHA256sum: bbf2919de88b46d44a36d1f2ccb699bcf3cc03e1fabd7ea0471ac54a2fdc57a0
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 8032
Filename: olsrd-mod-p2pd_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 8805
SHA256sum: b94cfc38a98446a4dccce1202214bdb723a1b1a7f526b515c68d17cc78ed2602
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 2756
Filename: olsrd-mod-pgraph_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 3477
SHA256sum: 9310a9824ccf538a043d2abaf231d37a3312f60b94742b5033ed723f55fd68ad
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 0.9.7-v0.9.7
Depends: libc, olsrd, libgps
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 61312
Filename: olsrd-mod-pud_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 61897
SHA256sum: 309070b4d128cefbd60a2569bc29a06b77b9e7fd4b135d5aad55cf7d502b7450
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 5911
Filename: olsrd-mod-quagga_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 6626
SHA256sum: a440cd2c90756dcd8ed02f6caa1c62df57a09308b2c9b8c9fb6be592dc106a45
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 10130
Filename: olsrd-mod-secure_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 10916
SHA256sum: 0466b6743ccf1edd595d8a6db72a63944e93947e20d2f893baa7a2af49ec2733
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 4164
Filename: olsrd-mod-sgwdynspeed_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 4928
SHA256sum: 9b394d7c4bacdc81a5bf0d3d41a862f854b57aa6a4952567e3e90cd2fca46e10
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 15134
Filename: olsrd-mod-txtinfo_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 15843
SHA256sum: 49a971fa065d3d124d60cad0f20987273e61a2483b3e76b45d5471e66b87c115
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 0.9.7-v0.9.7
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 1504
Filename: olsrd-mod-watchdog_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 2232
SHA256sum: bc2ae5f4ae9ebfc010172bae58ac31a8df46b313f650d158cc4caa15dc1f0f11
Description:  Watchdog plugin

Package: olsrd
Version: 0.9.7-v0.9.7
Depends: libc, libpthread
License: BSD-3-Clause
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 139345
Filename: olsrd_0.9.7-v0.9.7_arm_arm926ej-s.ipk
Size: 140106
SHA256sum: db16c22dd51e05d7e196dcba86f13fe233745ac0a74892dae541105ce8bdcf52
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 100166
Filename: oonf-dlep-proxy_0.14.1-1_arm_arm926ej-s.ipk
Size: 101026
SHA256sum: 8eafb37eabfcb9e01cad2a5b3e20e86b34ebf5fc7021724a3c3d917d21e18459
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 96716
Filename: oonf-dlep-radio_0.14.1-1_arm_arm926ej-s.ipk
Size: 97395
SHA256sum: 74b93fe1954f83f72413ca74b484c8a10df15e37dd070f134e8e253dfef6c360
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 1386
Filename: oonf-init-scripts_0.9.1-r3_arm_arm926ej-s.ipk
Size: 2102
SHA256sum: 44252b48e340419b3c443f68b40a6591a6b646af347b521eee520734d9e05eb3
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 0.14.1-1
Depends: libc, librt, libnl-tiny, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 161330
Filename: oonf-olsrd2_0.14.1-1_arm_arm926ej-s.ipk
Size: 162126
SHA256sum: d8022fcefe81f6c716e6661df3692aa3f4cd743e4cdb6e58f14355f080aed19e
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 5.2.0-1
Depends: libc, libpthread, iptables-mod-ipopt, libmicrohttpd-no-ssl
Conflicts: nodogsplash, nodogsplash2
License: GPL-2.0+
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 84767
Filename: opennds_5.2.0-1_arm_arm926ej-s.ipk
Size: 85618
SHA256sum: 3767568a20d92998dc396768f1b6e12b5702193009baaa57eec71ac5d0ad9340
Description:  openNDS is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.
 It also incorporates an API that allows the creation of
 sophisticated authentication applications.

Package: pimbd
Version: 2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 82902
Filename: pimbd_2018-06-19-dbf4e5913b06e3160f506df15e6a047a403a5f21-1_arm_arm926ej-s.ipk
Size: 83774
SHA256sum: ca4d54dc5853e8fb8af5955b29cb09442786540a608be457f8e9e0d5ba01a331
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be 
 installed and running in order for PIM to function.

Package: prince
Version: v0.4-1
Depends: libc, libjson-c2, libpthread
License: MIT
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 27008
Filename: prince_v0.4-1_arm_arm926ej-s.ipk
Size: 27927
SHA256sum: eb37c15e2c9bb3297e7cfaa6c3b2c7a529cff03a28cf9934e333657302ef4fe9
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 200621
Filename: quagga-bgpd_1.1.1-1_arm_arm926ej-s.ipk
Size: 200868
SHA256sum: bbc65aecbbeeae4fc287f39966b208a58cc8663ac06f91688400ce1629eb8442
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 92667
Filename: quagga-isisd_1.1.1-1_arm_arm926ej-s.ipk
Size: 93307
SHA256sum: 64950c80f39d45afc65241ecac94870b219318305f3c2fab4d9cb07929bf7ebc
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 193629
Filename: quagga-libospf_1.1.1-1_arm_arm926ej-s.ipk
Size: 192667
SHA256sum: 7c63334ef860469fecf143a70b1aa69625a06d34bb7cdcf8b61fbaab6f2fc4b7
Description:  OSPF library

Package: quagga-libzebra
Version: 1.1.1-1
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 130730
Filename: quagga-libzebra_1.1.1-1_arm_arm926ej-s.ipk
Size: 129874
SHA256sum: 5204ed05e7cbfcda28a0c20fa8ad07f1c5405b9c4b025cbca97ace33f33fa795
Description:  zebra library

Package: quagga-ospf6d
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 89185
Filename: quagga-ospf6d_1.1.1-1_arm_arm926ej-s.ipk
Size: 89805
SHA256sum: 588553c8fb82639b22330abeaba744c73f2a1df3c09762a11ec62118b122354d
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 3593
Filename: quagga-ospfd_1.1.1-1_arm_arm926ej-s.ipk
Size: 4367
SHA256sum: f5c8b019e7b84d811c676fb51afe0b1b5943ddaa4fb1f5f984b994787d1610b8
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 36519
Filename: quagga-ripd_1.1.1-1_arm_arm926ej-s.ipk
Size: 37242
SHA256sum: f7d5b958666a8346a3e77a9c2062ee1b9210cdcd50696a7653c0e992e1f7c85e
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 29840
Filename: quagga-ripngd_1.1.1-1_arm_arm926ej-s.ipk
Size: 30482
SHA256sum: 36859b4074fc433a7a0e09ba1b8192a1f614e29a600f036fd5bd1584dc9d7921
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 118379
Filename: quagga-vtysh_1.1.1-1_arm_arm926ej-s.ipk
Size: 118498
SHA256sum: b30ae3e5e7b4f39e152e17e576e80ecb38692f9ef66a33c9a6df634493c98b23
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 11456
Filename: quagga-watchquagga_1.1.1-1_arm_arm926ej-s.ipk
Size: 12229
SHA256sum: 4b1b96b65ea1a74dc73991c97053d64db3b102d3a2e71af12e9b00c77457512d
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.1.1-1
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 89565
Filename: quagga-zebra_1.1.1-1_arm_arm926ej-s.ipk
Size: 90022
SHA256sum: 452cf0ca562f2bf3870e19c96b2dcad9ab0dc72e76091f633553359bb953bd7e
Description:  Zebra daemon

Package: quagga
Version: 1.1.1-1
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 2380
Filename: quagga_1.1.1-1_arm_arm926ej-s.ipk
Size: 3197
SHA256sum: d2c841df274856c1fe6374437972b84d828797bf71009ef5a875f42872244834
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 1440-0
Depends: libc, libpthread
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 10027
Filename: vis_1440-0_arm_arm926ej-s.ipk
Size: 10821
SHA256sum: 2cd92178e238f98b1d2e763db1ea601c02d1258de9528f524d11c336f0946c10
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: arm_arm926ej-s
Installed-Size: 9598
Filename: zonestitcher_2016-06-28-8a28ae92c97099e771c9ede5641e3782ae809c27-1_arm_arm926ej-s.ipk
Size: 10360
SHA256sum: 3babe3fe2342781de1193bfbb3af85854cfa1898d84b7dfcc52c98b8b7950721
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.