This Redboot collection contains RAM and ROM images for varios phy and ram as well as flash configurations. for devices with Realtek phys you should use the kendin image which is universal for single port phys the images are optimized for very fast startup and decompression of the kernel image. the embedded lzma decoder was modified as well as the system startup code. additionally this redboot itself is now compressed with lzma which decreases the size to less than 64 kb to enter the redboot console, you must now press the reset button (if you push it longer than 5 seconds, it will reset the dd-wrt configuration then enters then redboot too) consider to download the correct image for your device. so never use a default image on a senao device and vice versa (both devices are using different incompatible gpio configurations which are required for board reset and the reset button) DONT USE THESE IMAGES IF YOU DONT KNOW WHAT YOU ARE DOING, SOME IMAGES ARE UNTESTED 16st June - 2009, Sebastian Gottschall / DD-WRT