%FILENAME%
klipper-0.12.0-3.0-pentium4.pkg.tar.zst

%NAME%
klipper

%BASE%
klipper

%VERSION%
0.12.0-3.0

%DESC%
3D printer firmware with motion planning on the host

%CSIZE%
6759975

%ISIZE%
214230952

%SHA256SUM%
c74c3df47abb27e713a2a2573a24f370cc5742618ffe0c6f3ed925415a3fb19e

%URL%
https://www.klipper3d.org/

%LICENSE%
GPL3

%ARCH%
pentium4

%BUILDDATE%
1715944035

%PACKAGER%
TasosSah <arch32@tasossah.com>

%DEPENDS%
python-can
python-cffi
python-greenlet
python-jinja
python-markupsafe
python-pyserial
libusb

%OPTDEPENDS%
ncurses: for choosing compilation config
avrdude: for flashing firmware on AVR MCU
stm32flash: for flashing firmware on STM32 MCUs
avr-gcc: for AVR MCU firmware compilation
avr-binutils: for AVR MCU firmware compilation
avr-libc: for AVR MCU firmware compilation
python-numpy: for resonance measurement
python-matplotlib: for resonance measurement
dfu-util: for flashing firmware on STM32 MCUs
arm-none-eabi-gcc: for RPi firmware compilation
arm-none-eabi-newlib: for RPi firmware compilation

%MAKEDEPENDS%
git

