OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 200K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Wed Feb 21 13:04:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link tentative
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
Welcome to the Fedora/RISC-V stage4 builder
+ set -e
+ dnf clean all
0 files removed
+ useradd -d /builddir mockbuild
+ su -c 'mkdir /builddir/build' mockbuild
+ echo '%_topdir /builddir/build'
+ su -c 'rpm -i /var/tmp/openssh-7.6p1-6.0.riscv64.fc27.1.src.rpm' mockbuild
+ dnf -y builddep /builddir/build/SPECS/openssh.spec
Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA
Local RPMS 7% [=- ] 2.9 MB/s | 911 kB 00:03 ETA
Local RPMS 15% [=== ] 2.9 MB/s | 1.7 MB 00:03 ETA
Local RPMS 24% [====- ] 3.0 MB/s | 2.7 MB 00:02 ETA
Local RPMS 32% [======- ] 3.0 MB/s | 3.7 MB 00:02 ETA
Local RPMS 41% [======== ] 3.0 MB/s | 4.8 MB 00:02 ETA
Local RPMS 50% [========== ] 3.0 MB/s | 5.8 MB 00:01 ETA
Local RPMS 58% [===========- ] 2.8 MB/s | 6.7 MB 00:01 ETA
Local RPMS 67% [=============- ] 2.9 MB/s | 7.7 MB 00:01 ETA
Local RPMS 76% [=============== ] 2.9 MB/s | 8.7 MB 00:00 ETA
Local RPMS 84% [================- ] 2.9 MB/s | 9.7 MB 00:00 ETA
Local RPMS 93% [==================- ] 2.9 MB/s | 11 MB 00:00 ETA
Local RPMS 2.4 MB/s | 11 MB 00:04
Last metadata expiration check: 0:01:19 ago on Wed Feb 21 13:04:35 2018.
Package audit-libs-2.8.2-4.0.riscv64.fc28.riscv64 is already installed, skipping.
Package util-linux-2.32-0.1.0.riscv64.fc28.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
audit-libs-devel riscv64 2.8.2-4.0.riscv64.fc28 local 81 k
autoconf noarch 2.69-26.fc28 local 709 k
automake noarch 1.15.1-3.fc28 local 706 k
fipscheck-devel riscv64 1.5.0-3.fc28 local 14 k
groff riscv64 1.22.3-8.fc27 local 1.1 M
libedit-devel riscv64 3.1-20.20170329cvs.fc28 local 42 k
libselinux-devel riscv64 2.7-11.0.riscv64.fc28 local 196 k
ncurses-devel riscv64 6.1-2.20180129.fc27 local 527 k
openssl-devel riscv64 1:1.1.0g-2.fc28 local 1.9 M
pam-devel riscv64 1.3.0-1.fc27 local 134 k
perl-generators noarch 1.10-6.fc27 local 16 k
perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M
perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k
zlib-devel riscv64 1.2.11-4.fc28 local 56 k
Installing dependencies:
emacs-filesystem noarch 1:25.3-5.fc28 local 67 k
fipscheck riscv64 1.5.0-3.fc28 local 35 k
fipscheck-lib riscv64 1.5.0-3.fc28 local 19 k
kernel-headers noarch 4.15.0-1.fc27 local 1.1 M
libedit riscv64 3.1-20.20170329cvs.fc28 local 239 k
libpkgconf riscv64 1.4.1-1.fc27 local 74 k
libsepol-devel riscv64 2.7-3.fc28 local 83 k
m4 riscv64 1.4.18-5.fc28 local 369 k
ncurses-c++-libs riscv64 6.1-2.20180129.fc27 local 185 k
pcre2-devel riscv64 10.31-0.3.RC1.fc28.1 local 587 k
pcre2-utf16 riscv64 10.31-0.3.RC1.fc28.1 local 296 k
pcre2-utf32 riscv64 10.31-0.3.RC1.fc28.1 local 290 k
perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k
perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k
perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M
perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k
perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k
perl-Fedora-VSP noarch 0.001-8.fc27 local 23 k
perl-File-Path noarch 2.15-1.fc27 local 37 k
perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k
perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k
perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k
perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k
perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k
perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k
perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k
perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k
perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k
perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k
perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k
perl-Socket riscv64 4:2.027-1.fc27 local 95 k
perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k
perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k
perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k
perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k
perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k
perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k
perl-Time-Local noarch 1:1.250-394.fc27 local 30 k
perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k
perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k
perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M
perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k
perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k
perl-threads riscv64 1:2.21-1.fc27 local 104 k
perl-threads-shared riscv64 1.58-1.fc27 local 91 k
pkgconf riscv64 1.4.1-1.fc27 local 35 k
pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k
pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k
Transaction Summary
================================================================================
Install 62 Packages
Total download size: 23 M
Installed size: 67 M
Downloading Packages:
(1/62): audit-libs-d 0% [ ] --- B/s | 0 B --:-- ETA
(1/62): audit-libs-devel-2.8.2-4.0.riscv64.fc28 529 kB/s | 81 kB 00:00
(2-3/62): groff-1.22 1% [ ] 1.7 MB/s | 273 kB 00:13 ETA
(2/62): perl-generators-1.10-6.fc27.noarch.rpm 391 kB/s | 16 kB 00:00
(3-4/62): pam-devel- 1% [ ] 1.7 MB/s | 353 kB 00:13 ETA
(3/62): pam-devel-1.3.0-1.fc27.riscv64.rpm 543 kB/s | 134 kB 00:00
(4-5/62): openssl-de 1% [ ] 1.7 MB/s | 391 kB 00:13 ETA
(4/62): perl-Fedora-VSP-0.001-8.fc27.noarch.rpm 535 kB/s | 23 kB 00:00
(5-6/62): openssl-de 1% [ ] 1.7 MB/s | 478 kB 00:13 ETA
(5-7/62): groff-1.22 5% [= ] 1.8 MB/s | 1.3 MB 00:12 ETA
(5-7/62): groff-1.22 9% [=- ] 1.9 MB/s | 2.3 MB 00:11 ETA
(5/62): autoconf-2.69-26.fc28.noarch.rpm 920 kB/s | 709 kB 00:00
(6-7/62): openssl-de 10% [== ] 1.8 MB/s | 2.6 MB 00:11 ETA
(6/62): emacs-filesystem-25.3-5.fc28.noarch.rpm 733 kB/s | 67 kB 00:00
(7-8/62): groff-1.22 11% [== ] 1.8 MB/s | 2.8 MB 00:11 ETA
(7/62): groff-1.22.3-8.fc27.riscv64.rpm 724 kB/s | 1.1 MB 00:01
(8-9/62): openssl-de 13% [==- ] 1.8 MB/s | 3.2 MB 00:11 ETA
(8/62): fipscheck-devel-1.5.0-3.fc28.riscv64.rp 510 kB/s | 14 kB 00:00
(9-10/62): openssl-d 14% [==- ] 1.8 MB/s | 3.3 MB 00:11 ETA
(9/62): fipscheck-lib-1.5.0-3.fc28.riscv64.rpm 455 kB/s | 19 kB 00:00
(10-11/62): openssl- 14% [==- ] 1.8 MB/s | 3.4 MB 00:11 ETA
(10/62): fipscheck-1.5.0-3.fc28.riscv64.rpm 594 kB/s | 35 kB 00:00
(11-12/62): openssl- 14% [==- ] 1.8 MB/s | 3.5 MB 00:11 ETA
(11/62): libedit-devel-3.1-20.20170329cvs.fc28. 696 kB/s | 42 kB 00:00
(12-13/62): openssl- 15% [=== ] 1.8 MB/s | 3.6 MB 00:11 ETA
(12/62): libedit-3.1-20.20170329cvs.fc28.riscv6 905 kB/s | 239 kB 00:00
(13-14/62): openssl- 18% [===- ] 1.8 MB/s | 4.3 MB 00:10 ETA
(13/62): automake-1.15.1-3.fc28.noarch.rpm 623 kB/s | 706 kB 00:01
(14-15/62): libselin 20% [==== ] 1.8 MB/s | 4.8 MB 00:10 ETA
(14/62): libselinux-devel-2.7-11.0.riscv64.fc28 586 kB/s | 196 kB 00:00
(15-16/62): ncurses- 20% [==== ] 1.8 MB/s | 4.9 MB 00:10 ETA
(15/62): ncurses-c++-libs-6.1-2.20180129.fc27.r 816 kB/s | 185 kB 00:00
(16-17/62): ncurses- 23% [====- ] 1.8 MB/s | 5.5 MB 00:09 ETA
(16/62): openssl-devel-1.1.0g-2.fc28.riscv64.rp 673 kB/s | 1.9 MB 00:02
(17-18/62): perl-int 25% [===== ] 1.8 MB/s | 6.0 MB 00:09 ETA
(17/62): ncurses-devel-6.1-2.20180129.fc27.risc 551 kB/s | 527 kB 00:00
(18-19/62): perl-int 27% [===== ] 1.8 MB/s | 6.4 MB 00:09 ETA
(18/62): perl-Errno-1.28-408.fc28.1.riscv64.ris 796 kB/s | 73 kB 00:00
(19-20/62): perl-int 28% [=====- ] 1.8 MB/s | 6.6 MB 00:09 ETA
(19/62): perl-podlators-4.09-408.fc27.0.riscv64 913 kB/s | 157 kB 00:00
(20-21/62): perl-int 30% [====== ] 1.8 MB/s | 7.1 MB 00:09 ETA
(20/62): zlib-devel-1.2.11-4.fc28.riscv64.rpm 732 kB/s | 56 kB 00:00
(21-22/62): perl-int 30% [====== ] 1.8 MB/s | 7.3 MB 00:08 ETA
(21/62): libsepol-devel-2.7-3.fc28.riscv64.rpm 758 kB/s | 83 kB 00:00
(22-23/62): perl-int 32% [====== ] 1.8 MB/s | 7.5 MB 00:08 ETA
(22-24/62): perl-lib 35% [======= ] 1.9 MB/s | 8.4 MB 00:08 ETA
(22/62): pcre2-devel-10.31-0.3.RC1.fc28.1.riscv 939 kB/s | 587 kB 00:00
(23-24/62): perl-lib 39% [=======- ] 1.9 MB/s | 9.3 MB 00:07 ETA
(23-25/62): perl-lib 43% [========- ] 2.0 MB/s | 10 MB 00:06 ETA
(23/62): pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv 902 kB/s | 296 kB 00:00
(24-25/62): perl-lib 43% [========- ] 2.0 MB/s | 10 MB 00:06 ETA
(24-26/62): pcre2-ut 46% [========= ] 2.0 MB/s | 11 MB 00:06 ETA
(24/62): pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv 895 kB/s | 290 kB 00:00
(25-26/62): perl-int 46% [========= ] 2.0 MB/s | 11 MB 00:06 ETA
(25/62): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 517 kB/s | 14 kB 00:00
(26-27/62): perl-int 47% [========= ] 2.0 MB/s | 11 MB 00:06 ETA
(26/62): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 561 kB/s | 15 kB 00:00
(27-28/62): perl-int 47% [========= ] 2.0 MB/s | 11 MB 00:06 ETA
(27/62): pkgconf-1.4.1-1.fc27.riscv64.rpm 610 kB/s | 35 kB 00:00
(28-29/62): perl-int 47% [=========- ] 2.0 MB/s | 11 MB 00:06 ETA
(28/62): libpkgconf-1.4.1-1.fc27.riscv64.rpm 797 kB/s | 74 kB 00:00
(29-30/62): perl-int 48% [=========- ] 2.0 MB/s | 11 MB 00:06 ETA
(29/62): perl-Carp-1.42-408.fc27.0.riscv64.noar 772 kB/s | 84 kB 00:00
(30-31/62): perl-int 50% [========== ] 2.0 MB/s | 12 MB 00:05 ETA
(30/62): perl-Exporter-5.72-408.fc27.0.riscv64. 818 kB/s | 87 kB 00:00
(31-32/62): perl-int 51% [========== ] 2.0 MB/s | 12 MB 00:05 ETA
(31/62): perl-File-Path-2.15-1.fc27.noarch.rpm 639 kB/s | 37 kB 00:00
(32-33/62): perl-int 51% [========== ] 2.0 MB/s | 12 MB 00:05 ETA
(32/62): perl-Text-Tabs+Wrap-2013.0523-408.fc27 866 kB/s | 80 kB 00:00
(33-34/62): perl-int 52% [==========- ] 2.0 MB/s | 12 MB 00:05 ETA
(33/62): perl-constant-1.33-408.fc27.0.riscv64. 856 kB/s | 79 kB 00:00
(34-35/62): perl-lib 53% [==========- ] 2.0 MB/s | 13 MB 00:05 ETA
(34/62): perl-parent-0.236-408.fc27.0.riscv64.n 767 kB/s | 71 kB 00:00
(35-36/62): perl-lib 54% [==========- ] 2.0 MB/s | 13 MB 00:05 ETA
(35/62): perl-IO-1.38-408.fc28.1.riscv64.riscv6 844 kB/s | 176 kB 00:00
(36-37/62): perl-lib 57% [=========== ] 2.0 MB/s | 13 MB 00:05 ETA
(36/62): perl-PathTools-3.67-408.fc27.0.riscv64 870 kB/s | 166 kB 00:00
(37-38/62): perl-lib 59% [===========- ] 2.0 MB/s | 14 MB 00:04 ETA
(37/62): perl-Scalar-List-Utils-1.48-1.fc27.ris 853 kB/s | 119 kB 00:00
(38-39/62): perl-lib 60% [============ ] 2.0 MB/s | 14 MB 00:04 ETA
(38/62): perl-Unicode-Normalize-1.25-408.fc27.0 867 kB/s | 164 kB 00:00
(39-40/62): perl-lib 62% [============- ] 2.0 MB/s | 15 MB 00:04 ETA
(39/62): perl-macros-5.26.1-408.fc28.1.riscv64. 747 kB/s | 69 kB 00:00
(40-41/62): perl-int 63% [============- ] 2.0 MB/s | 15 MB 00:04 ETA
(40/62): perl-threads-2.21-1.fc27.riscv64.rpm 846 kB/s | 104 kB 00:00
(41-42/62): perl-int 65% [============= ] 2.0 MB/s | 15 MB 00:04 ETA
(41/62): perl-threads-shared-1.58-1.fc27.riscv6 795 kB/s | 91 kB 00:00
(42-43/62): perl-int 66% [============= ] 2.0 MB/s | 16 MB 00:03 ETA
(42/62): perl-libs-5.26.1-408.fc28.1.riscv64.ri 700 kB/s | 3.3 MB 00:04
(43-44/62): perl-int 67% [============= ] 1.9 MB/s | 16 MB 00:04 ETA
(43/62): perl-Socket-2.027-1.fc27.riscv64.rpm 177 kB/s | 95 kB 00:00
(44-45/62): perl-int 67% [=============- ] 1.9 MB/s | 16 MB 00:04 ETA
(44/62): perl-Data-Dumper-2.167-408.fc27.0.risc 650 kB/s | 149 kB 00:00
(45-46/62): kernel-h 69% [=============- ] 1.9 MB/s | 16 MB 00:03 ETA
(45/62): perl-Getopt-Long-2.50-3.fc27.noarch.rp 785 kB/s | 61 kB 00:00
(46-47/62): kernel-h 69% [=============- ] 1.9 MB/s | 16 MB 00:03 ETA
(46/62): perl-Pod-Simple-3.35-408.fc27.0.riscv6 924 kB/s | 271 kB 00:00
(47-48/62): kernel-h 73% [==============- ] 1.9 MB/s | 17 MB 00:03 ETA
(47/62): perl-Pod-Usage-1.69-408.fc27.0.riscv64 819 kB/s | 89 kB 00:00
(48-49/62): kernel-h 74% [==============- ] 1.9 MB/s | 17 MB 00:03 ETA
(48/62): perl-Term-ANSIColor-4.06-408.fc27.0.ri 857 kB/s | 94 kB 00:00
(49-50/62): kernel-h 75% [=============== ] 1.9 MB/s | 18 MB 00:02 ETA
(49/62): perl-Term-Cap-1.17-408.fc27.0.riscv64. 845 kB/s | 78 kB 00:00
(50-51/62): kernel-h 76% [=============== ] 1.9 MB/s | 18 MB 00:02 ETA
(50-52/62): perl-int 80% [================ ] 2.0 MB/s | 19 MB 00:02 ETA
(50/62): kernel-headers-4.15.0-1.fc27.noarch.rp 753 kB/s | 1.1 MB 00:01
(51-52/62): perl-int 81% [================ ] 1.9 MB/s | 19 MB 00:02 ETA
(51/62): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 872 kB/s | 139 kB 00:00
(52-53/62): perl-int 82% [================- ] 1.9 MB/s | 19 MB 00:02 ETA
(52/62): perl-Pod-Escapes-1.07-408.fc27.0.riscv 831 kB/s | 77 kB 00:00
(53-54/62): perl-int 83% [================- ] 1.9 MB/s | 20 MB 00:01 ETA
(53/62): perl-File-Temp-0.230.400-408.fc27.0.ri 819 kB/s | 103 kB 00:00
(54-55/62): perl-int 85% [================= ] 1.9 MB/s | 20 MB 00:01 ETA
(54/62): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 781 kB/s | 97 kB 00:00
(55-56/62): perl-Enc 86% [================= ] 2.0 MB/s | 20 MB 00:01 ETA
(55/62): perl-Text-ParseWords-3.30-408.fc27.0.r 794 kB/s | 73 kB 00:00
(56-57/62): perl-Enc 87% [=================- ] 2.0 MB/s | 21 MB 00:01 ETA
(56/62): perl-Time-Local-1.250-394.fc27.noarch. 724 kB/s | 30 kB 00:00
(57-58/62): perl-Enc 87% [=================- ] 1.9 MB/s | 21 MB 00:01 ETA
(57/62): perl-Thread-Queue-3.12-408.fc27.0.risc 834 kB/s | 77 kB 00:00
(58-59/62): perl-Enc 88% [=================- ] 1.9 MB/s | 21 MB 00:01 ETA
(58-60/62): perl-Enc 92% [==================- ] 2.0 MB/s | 22 MB 00:00 ETA
(58/62): m4-1.4.18-5.fc28.riscv64.rpm 921 kB/s | 369 kB 00:00
(59-60/62): perl-Enc 93% [==================- ] 2.0 MB/s | 22 MB 00:00 ETA
(59/62): perl-Encode-2.94-16.fc27.riscv64.rpm 705 kB/s | 1.4 MB 00:02
(60-61/62): perl-int 94% [==================- ] 1.9 MB/s | 22 MB 00:00 ETA
(60/62): perl-MIME-Base64-3.15-408.fc27.0.riscv 340 kB/s | 111 kB 00:00
(61-62/62): perl-int 95% [=================== ] 1.9 MB/s | 22 MB 00:00 ETA
(61/62): perl-Storable-2.62-408.fc27.0.riscv64. 1.0 MB/s | 205 kB 00:00
(62/62): perl-interp 96% [=================== ] 1.9 MB/s | 23 MB 00:00 ETA
(62/62): perl-interpreter-5.26.1-408.fc28.1.ris 708 kB/s | 6.7 MB 00:09
--------------------------------------------------------------------------------
Total 1.8 MB/s | 23 MB 00:13
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [ ] 1/1
Preparing : [= ] 1/1
Preparing : [== ] 1/1
Preparing : [=== ] 1/1
Preparing : [==== ] 1/1
Preparing : [===== ] 1/1
Preparing : [====== ] 1/1
Preparing : [======= ] 1/1
Preparing : [======== ] 1/1
Preparing : [========= ] 1/1
Preparing : [========== ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============ ] 1/1
Preparing : [============= ] 1/1
Preparing : [============== ] 1/1
Preparing : [=============== ] 1/1
Preparing : [================ ] 1/1
Preparing : [================= ] 1/1
Preparing : [================== ] 1/1
Preparing : [=================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [===================== ] 1/1
Preparing : [====================== ] 1/1
Preparing : [======================= ] 1/1
Preparing : [======================== ] 1/1
Preparing : [========================= ] 1/1
Preparing : [========================== ] 1/1
Preparing : [=========================== ] 1/1
Preparing : [============================ ] 1/1
Preparing : [============================= ] 1/1
Preparing : [============================== ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================ ] 1/1
Preparing : [================================= ] 1/1
Preparing : [================================== ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [==================================== ] 1/1
Preparing : [===================================== ] 1/1
Preparing : [====================================== ] 1/1
Preparing : [======================================= ] 1/1
Preparing : [======================================== ] 1/1
Preparing : [========================================= ] 1/1
Preparing : [========================================== ] 1/1
Preparing : [=========================================== ] 1/1
Preparing : [============================================ ] 1/1
Preparing : [============================================= ] 1/1
Preparing : [============================================== ] 1/1
Preparing : [=============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : [================================================= ] 1/1
Preparing : 1/1
Installing : perl-Carp-1.42-408.fc27. [ ] 1/62
Installing : perl-Carp-1.42-408.fc27. [==== ] 1/62
Installing : perl-Carp-1.42-408.fc27. [======================== ] 1/62
Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 1/62
Installing : perl-Exporter-5.72-408.f [ ] 2/62
Installing : perl-Exporter-5.72-408.f [===== ] 2/62
Installing : perl-Exporter-5.72-408.f [======= ] 2/62
Installing : perl-Exporter-5.72-408.f [==================== ] 2/62
Installing : perl-Exporter-5.72-408.f [======================== ] 2/62
Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 2/62
Installing : perl-libs-4:5.26.1-408.f [ ] 3/62
Installing : perl-libs-4:5.26.1-408.f [= ] 3/62
Installing : perl-libs-4:5.26.1-408.f [== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [=== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [==== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [===== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [====== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [======= ] 3/62
Installing : perl-libs-4:5.26.1-408.f [======== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [========= ] 3/62
Installing : perl-libs-4:5.26.1-408.f [========== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [=========== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [============ ] 3/62
Installing : perl-libs-4:5.26.1-408.f [============= ] 3/62
Installing : perl-libs-4:5.26.1-408.f [============== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [=============== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [================ ] 3/62
Installing : perl-libs-4:5.26.1-408.f [================= ] 3/62
Installing : perl-libs-4:5.26.1-408.f [================== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [=================== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [==================== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [===================== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [====================== ] 3/62
Installing : perl-libs-4:5.26.1-408.f [======================= ] 3/62
Installing : perl-libs-4:5.26.1-408.f [======================== ] 3/62
Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 3/62
random: crng init done
Installing : perl-Scalar-List-Utils-3 [ ] 4/62
Installing : perl-Scalar-List-Utils-3 [= ] 4/62
Installing : perl-Scalar-List-Utils-3 [== ] 4/62
Installing : perl-Scalar-List-Utils-3 [=== ] 4/62
Installing : perl-Scalar-List-Utils-3 [===== ] 4/62
Installing : perl-Scalar-List-Utils-3 [======== ] 4/62
Installing : perl-Scalar-List-Utils-3 [========== ] 4/62
Installing : perl-Scalar-List-Utils-3 [============= ] 4/62
Installing : perl-Scalar-List-Utils-3 [================ ] 4/62
Installing : perl-Scalar-List-Utils-3 [================== ] 4/62
Installing : perl-Scalar-List-Utils-3 [===================== ] 4/62
Installing : perl-Scalar-List-Utils-3 [====================== ] 4/62
Installing : perl-Scalar-List-Utils-3 [======================= ] 4/62
Installing : perl-Scalar-List-Utils-3 [======================== ] 4/62
Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/62
Installing : perl-Text-ParseWords-3.3 [ ] 5/62
Installing : perl-Text-ParseWords-3.3 [======= ] 5/62
Installing : perl-Text-ParseWords-3.3 [======================== ] 5/62
Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/62
Installing : perl-macros-4:5.26.1-408 [ ] 6/62
Installing : perl-macros-4:5.26.1-408 [======================== ] 6/62
Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 6/62
Installing : perl-Errno-1.28-408.fc28 [ ] 7/62
Installing : perl-Errno-1.28-408.fc28 [================= ] 7/62
Installing : perl-Errno-1.28-408.fc28 [======================== ] 7/62
Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 7/62
Installing : perl-Text-Tabs+Wrap-2013 [ ] 8/62
Installing : perl-Text-Tabs+Wrap-2013 [=== ] 8/62
Installing : perl-Text-Tabs+Wrap-2013 [======== ] 8/62
Installing : perl-Text-Tabs+Wrap-2013 [========= ] 8/62
Installing : perl-Text-Tabs+Wrap-2013 [============== ] 8/62
Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 8/62
Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 8/62
Installing : perl-constant-1.33-408.f [ ] 9/62
Installing : perl-constant-1.33-408.f [======= ] 9/62
Installing : perl-constant-1.33-408.f [======================== ] 9/62
Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 9/62
Installing : perl-parent-1:0.236-408. [ ] 10/62
Installing : perl-parent-1:0.236-408. [============ ] 10/62
Installing : perl-parent-1:0.236-408. [======================== ] 10/62
Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 10/62
Installing : perl-File-Path-2.15-1.fc [ ] 11/62
Installing : perl-File-Path-2.15-1.fc [==== ] 11/62
Installing : perl-File-Path-2.15-1.fc [======== ] 11/62
Installing : perl-File-Path-2.15-1.fc [==================== ] 11/62
Installing : perl-File-Path-2.15-1.fc [======================== ] 11/62
Installing : perl-File-Path-2.15-1.fc27.noarch 11/62
Installing : perl-PathTools-3.67-408. [ ] 12/62
Installing : perl-PathTools-3.67-408. [== ] 12/62
Installing : perl-PathTools-3.67-408. [=== ] 12/62
Installing : perl-PathTools-3.67-408. [==== ] 12/62
Installing : perl-PathTools-3.67-408. [======= ] 12/62
Installing : perl-PathTools-3.67-408. [========= ] 12/62
Installing : perl-PathTools-3.67-408. [=========== ] 12/62
Installing : perl-PathTools-3.67-408. [============== ] 12/62
Installing : perl-PathTools-3.67-408. [================== ] 12/62
Installing : perl-PathTools-3.67-408. [==================== ] 12/62
Installing : perl-PathTools-3.67-408. [===================== ] 12/62
Installing : perl-PathTools-3.67-408. [====================== ] 12/62
Installing : perl-PathTools-3.67-408. [======================= ] 12/62
Installing : perl-PathTools-3.67-408. [======================== ] 12/62
Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 12/62
Installing : perl-Unicode-Normalize-1 [ ] 13/62
Installing : perl-Unicode-Normalize-1 [= ] 13/62
Installing : perl-Unicode-Normalize-1 [== ] 13/62
Installing : perl-Unicode-Normalize-1 [=== ] 13/62
Installing : perl-Unicode-Normalize-1 [==== ] 13/62
Installing : perl-Unicode-Normalize-1 [===== ] 13/62
Installing : perl-Unicode-Normalize-1 [====== ] 13/62
Installing : perl-Unicode-Normalize-1 [======= ] 13/62
Installing : perl-Unicode-Normalize-1 [======== ] 13/62
Installing : perl-Unicode-Normalize-1 [========= ] 13/62
Installing : perl-Unicode-Normalize-1 [========== ] 13/62
Installing : perl-Unicode-Normalize-1 [============ ] 13/62
Installing : perl-Unicode-Normalize-1 [============= ] 13/62
Installing : perl-Unicode-Normalize-1 [============== ] 13/62
Installing : perl-Unicode-Normalize-1 [=============== ] 13/62
Installing : perl-Unicode-Normalize-1 [================ ] 13/62
Installing : perl-Unicode-Normalize-1 [================= ] 13/62
Installing : perl-Unicode-Normalize-1 [================== ] 13/62
Installing : perl-Unicode-Normalize-1 [=================== ] 13/62
Installing : perl-Unicode-Normalize-1 [==================== ] 13/62
Installing : perl-Unicode-Normalize-1 [===================== ] 13/62
Installing : perl-Unicode-Normalize-1 [====================== ] 13/62
Installing : perl-Unicode-Normalize-1 [======================= ] 13/62
Installing : perl-Unicode-Normalize-1 [======================== ] 13/62
Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 13/62
Installing : perl-threads-shared-1.58 [ ] 14/62
Installing : perl-threads-shared-1.58 [=== ] 14/62
Installing : perl-threads-shared-1.58 [======= ] 14/62
Installing : perl-threads-shared-1.58 [========== ] 14/62
Installing : perl-threads-shared-1.58 [============== ] 14/62
Installing : perl-threads-shared-1.58 [================= ] 14/62
Installing : perl-threads-shared-1.58 [==================== ] 14/62
Installing : perl-threads-shared-1.58 [======================= ] 14/62
Installing : perl-threads-shared-1.58 [======================== ] 14/62
Installing : perl-threads-shared-1.58-1.fc27.riscv64 14/62
Installing : perl-threads-1:2.21-1.fc [ ] 15/62
Installing : perl-threads-1:2.21-1.fc [=== ] 15/62
Installing : perl-threads-1:2.21-1.fc [====== ] 15/62
Installing : perl-threads-1:2.21-1.fc [========= ] 15/62
Installing : perl-threads-1:2.21-1.fc [============= ] 15/62
Installing : perl-threads-1:2.21-1.fc [================ ] 15/62
Installing : perl-threads-1:2.21-1.fc [================== ] 15/62
Installing : perl-threads-1:2.21-1.fc [===================== ] 15/62
Installing : perl-threads-1:2.21-1.fc [====================== ] 15/62
Installing : perl-threads-1:2.21-1.fc [======================= ] 15/62
Installing : perl-threads-1:2.21-1.fc [======================== ] 15/62
Installing : perl-threads-1:2.21-1.fc27.riscv64 15/62
Installing : perl-IO-1.38-408.fc28.1. [ ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [= ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [=== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [==== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [===== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [====== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [======= ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [======== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [=========== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [============== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [================= ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [==================== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [===================== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [====================== ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [======================= ] 16/62
Installing : perl-IO-1.38-408.fc28.1. [======================== ] 16/62
Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 16/62
Installing : perl-interpreter-4:5.26. [ ] 17/62
Installing : perl-interpreter-4:5.26. [= ] 17/62
Installing : perl-interpreter-4:5.26. [== ] 17/62
Installing : perl-interpreter-4:5.26. [=== ] 17/62
Installing : perl-interpreter-4:5.26. [==== ] 17/62
Installing : perl-interpreter-4:5.26. [===== ] 17/62
Installing : perl-interpreter-4:5.26. [====== ] 17/62
Installing : perl-interpreter-4:5.26. [======= ] 17/62
Installing : perl-interpreter-4:5.26. [======== ] 17/62
Installing : perl-interpreter-4:5.26. [========= ] 17/62
Installing : perl-interpreter-4:5.26. [========== ] 17/62
Installing : perl-interpreter-4:5.26. [=========== ] 17/62
Installing : perl-interpreter-4:5.26. [============ ] 17/62
Installing : perl-interpreter-4:5.26. [============= ] 17/62
Installing : perl-interpreter-4:5.26. [============== ] 17/62
Installing : perl-interpreter-4:5.26. [=============== ] 17/62
Installing : perl-interpreter-4:5.26. [================ ] 17/62
Installing : perl-interpreter-4:5.26. [================= ] 17/62
Installing : perl-interpreter-4:5.26. [================== ] 17/62
Installing : perl-interpreter-4:5.26. [=================== ] 17/62
Installing : perl-interpreter-4:5.26. [==================== ] 17/62
Installing : perl-interpreter-4:5.26. [===================== ] 17/62
Installing : perl-interpreter-4:5.26. [====================== ] 17/62
Installing : perl-interpreter-4:5.26. [======================= ] 17/62
Installing : perl-interpreter-4:5.26. [======================== ] 17/62
Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 17/62
Installing : perl-Socket-4:2.027-1.fc [ ] 18/62
Installing : perl-Socket-4:2.027-1.fc [=== ] 18/62
Installing : perl-Socket-4:2.027-1.fc [======= ] 18/62
Installing : perl-Socket-4:2.027-1.fc [========== ] 18/62
Installing : perl-Socket-4:2.027-1.fc [============== ] 18/62
Installing : perl-Socket-4:2.027-1.fc [================= ] 18/62
Installing : perl-Socket-4:2.027-1.fc [==================== ] 18/62
Installing : perl-Socket-4:2.027-1.fc [===================== ] 18/62
Installing : perl-Socket-4:2.027-1.fc [====================== ] 18/62
Installing : perl-Socket-4:2.027-1.fc [======================= ] 18/62
Installing : perl-Socket-4:2.027-1.fc [======================== ] 18/62
Installing : perl-Socket-4:2.027-1.fc27.riscv64 18/62
Installing : perl-Data-Dumper-2.167-4 [ ] 19/62
Installing : perl-Data-Dumper-2.167-4 [=== ] 19/62
Installing : perl-Data-Dumper-2.167-4 [==== ] 19/62
Installing : perl-Data-Dumper-2.167-4 [======== ] 19/62
Installing : perl-Data-Dumper-2.167-4 [============ ] 19/62
Installing : perl-Data-Dumper-2.167-4 [=============== ] 19/62
Installing : perl-Data-Dumper-2.167-4 [=================== ] 19/62
Installing : perl-Data-Dumper-2.167-4 [====================== ] 19/62
Installing : perl-Data-Dumper-2.167-4 [======================= ] 19/62
Installing : perl-Data-Dumper-2.167-4 [======================== ] 19/62
Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 19/62
Installing : fipscheck-1.5.0-3.fc28.r [ ] 20/62
Installing : fipscheck-1.5.0-3.fc28.r [========= ] 20/62
Installing : fipscheck-1.5.0-3.fc28.r [=========== ] 20/62
Installing : fipscheck-1.5.0-3.fc28.r [==================== ] 20/62
Installing : fipscheck-1.5.0-3.fc28.r [===================== ] 20/62
Installing : fipscheck-1.5.0-3.fc28.r [====================== ] 20/62
Installing : fipscheck-1.5.0-3.fc28.r [======================= ] 20/62
Installing : fipscheck-1.5.0-3.fc28.r [======================== ] 20/62
Installing : fipscheck-1.5.0-3.fc28.riscv64 20/62
Installing : fipscheck-lib-1.5.0-3.fc [ ] 21/62
Installing : fipscheck-lib-1.5.0-3.fc [======================== ] 21/62
Installing : fipscheck-lib-1.5.0-3.fc28.riscv64 21/62
Running scriptlet: fipscheck-lib-1.5.0-3.fc28.riscv64 21/62
Installing : perl-Term-Cap-1.17-408.f [ ] 22/62
Installing : perl-Term-Cap-1.17-408.f [==== ] 22/62
Installing : perl-Term-Cap-1.17-408.f [======================== ] 22/62
Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 22/62
Installing : perl-Pod-Escapes-1:1.07- [ ] 23/62
Installing : perl-Pod-Escapes-1:1.07- [==== ] 23/62
Installing : perl-Pod-Escapes-1:1.07- [======================== ] 23/62
Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 23/62
Installing : perl-File-Temp-0.230.400 [ ] 24/62
Installing : perl-File-Temp-0.230.400 [=== ] 24/62
Installing : perl-File-Temp-0.230.400 [============ ] 24/62
Installing : perl-File-Temp-0.230.400 [===================== ] 24/62
Installing : perl-File-Temp-0.230.400 [======================== ] 24/62
Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 24/62
Installing : perl-MIME-Base64-3.15-40 [ ] 25/62
Installing : perl-MIME-Base64-3.15-40 [= ] 25/62
Installing : perl-MIME-Base64-3.15-40 [== ] 25/62
Installing : perl-MIME-Base64-3.15-40 [========== ] 25/62
Installing : perl-MIME-Base64-3.15-40 [================== ] 25/62
Installing : perl-MIME-Base64-3.15-40 [======================= ] 25/62
Installing : perl-MIME-Base64-3.15-40 [======================== ] 25/62
Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 25/62
Installing : perl-Storable-1:2.62-408 [ ] 26/62
Installing : perl-Storable-1:2.62-408 [== ] 26/62
Installing : perl-Storable-1:2.62-408 [==== ] 26/62
Installing : perl-Storable-1:2.62-408 [====== ] 26/62
Installing : perl-Storable-1:2.62-408 [======== ] 26/62
Installing : perl-Storable-1:2.62-408 [========== ] 26/62
Installing : perl-Storable-1:2.62-408 [============ ] 26/62
Installing : perl-Storable-1:2.62-408 [============== ] 26/62
Installing : perl-Storable-1:2.62-408 [================ ] 26/62
Installing : perl-Storable-1:2.62-408 [================== ] 26/62
Installing : perl-Storable-1:2.62-408 [==================== ] 26/62
Installing : perl-Storable-1:2.62-408 [====================== ] 26/62
Installing : perl-Storable-1:2.62-408 [======================== ] 26/62
Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 26/62
Installing : perl-Thread-Queue-3.12-4 [ ] 27/62
Installing : perl-Thread-Queue-3.12-4 [===== ] 27/62
Installing : perl-Thread-Queue-3.12-4 [====== ] 27/62
Installing : perl-Thread-Queue-3.12-4 [======================== ] 27/62
Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 27/62
Installing : perl-Time-Local-1:1.250- [ ] 28/62
Installing : perl-Time-Local-1:1.250- [= ] 28/62
Installing : perl-Time-Local-1:1.250- [===== ] 28/62
Installing : perl-Time-Local-1:1.250- [======== ] 28/62
Installing : perl-Time-Local-1:1.250- [========= ] 28/62
Installing : perl-Time-Local-1:1.250- [================= ] 28/62
Installing : perl-Time-Local-1:1.250- [=================== ] 28/62
Installing : perl-Time-Local-1:1.250- [======================== ] 28/62
Installing : perl-Time-Local-1:1.250-394.fc27.noarch 28/62
Installing : perl-HTTP-Tiny-0.070-408 [ ] 29/62
Installing : perl-HTTP-Tiny-0.070-408 [== ] 29/62
Installing : perl-HTTP-Tiny-0.070-408 [============ ] 29/62
Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 29/62
Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 29/62
Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 29/62
Installing : perl-Fedora-VSP-0.001-8. [ ] 30/62
Installing : perl-Fedora-VSP-0.001-8. [=================== ] 30/62
Installing : perl-Fedora-VSP-0.001-8. [===================== ] 30/62
Installing : perl-Fedora-VSP-0.001-8. [====================== ] 30/62
Installing : perl-Fedora-VSP-0.001-8. [======================== ] 30/62
Installing : perl-Fedora-VSP-0.001-8.fc27.noarch 30/62
Installing : perl-Term-ANSIColor-4.06 [ ] 31/62
Installing : perl-Term-ANSIColor-4.06 [==== ] 31/62
Installing : perl-Term-ANSIColor-4.06 [================== ] 31/62
Installing : perl-Term-ANSIColor-4.06 [======================== ] 31/62
Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 31/62
Installing : perl-podlators-4.09-408. [ ] 32/62
Installing : perl-podlators-4.09-408. [= ] 32/62
Installing : perl-podlators-4.09-408. [== ] 32/62
Installing : perl-podlators-4.09-408. [=== ] 32/62
Installing : perl-podlators-4.09-408. [==== ] 32/62
Installing : perl-podlators-4.09-408. [===== ] 32/62
Installing : perl-podlators-4.09-408. [====== ] 32/62
Installing : perl-podlators-4.09-408. [======= ] 32/62
Installing : perl-podlators-4.09-408. [=========== ] 32/62
Installing : perl-podlators-4.09-408. [=============== ] 32/62
Installing : perl-podlators-4.09-408. [================ ] 32/62
Installing : perl-podlators-4.09-408. [================= ] 32/62
Installing : perl-podlators-4.09-408. [===================== ] 32/62
Installing : perl-podlators-4.09-408. [====================== ] 32/62
Installing : perl-podlators-4.09-408. [======================= ] 32/62
Installing : perl-podlators-4.09-408. [======================== ] 32/62
Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 32/62
Installing : perl-Pod-Simple-1:3.35-4 [ ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [= ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [=== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [==== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [====== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [======= ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [========= ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [========== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [============ ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [============= ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [================ ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [================= ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [================== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 33/62
Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 33/62
Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 33/62
Installing : perl-Getopt-Long-1:2.50- [ ] 34/62
Installing : perl-Getopt-Long-1:2.50- [=== ] 34/62
Installing : perl-Getopt-Long-1:2.50- [==== ] 34/62
Installing : perl-Getopt-Long-1:2.50- [===== ] 34/62
Installing : perl-Getopt-Long-1:2.50- [====== ] 34/62
Installing : perl-Getopt-Long-1:2.50- [======= ] 34/62
Installing : perl-Getopt-Long-1:2.50- [========= ] 34/62
Installing : perl-Getopt-Long-1:2.50- [=============== ] 34/62
Installing : perl-Getopt-Long-1:2.50- [===================== ] 34/62
Installing : perl-Getopt-Long-1:2.50- [======================== ] 34/62
Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 34/62
Installing : perl-Encode-4:2.94-16.fc [ ] 35/62
Installing : perl-Encode-4:2.94-16.fc [= ] 35/62
Installing : perl-Encode-4:2.94-16.fc [== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [=== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [==== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [===== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [====== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [======= ] 35/62
Installing : perl-Encode-4:2.94-16.fc [======== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [========= ] 35/62
Installing : perl-Encode-4:2.94-16.fc [========== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [=========== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [============ ] 35/62
Installing : perl-Encode-4:2.94-16.fc [============= ] 35/62
Installing : perl-Encode-4:2.94-16.fc [============== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [=============== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [================ ] 35/62
Installing : perl-Encode-4:2.94-16.fc [================= ] 35/62
Installing : perl-Encode-4:2.94-16.fc [================== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [=================== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [==================== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [===================== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [====================== ] 35/62
Installing : perl-Encode-4:2.94-16.fc [======================= ] 35/62
Installing : perl-Encode-4:2.94-16.fc [======================== ] 35/62
Installing : perl-Encode-4:2.94-16.fc27.riscv64 35/62
Installing : perl-Pod-Perldoc-3.28-40 [ ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [= ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [=== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [==== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [===== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [====== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [================ ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [================= ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [================== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 36/62
Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 36/62
Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 36/62
Installing : perl-Pod-Usage-4:1.69-40 [ ] 37/62
Installing : perl-Pod-Usage-4:1.69-40 [== ] 37/62
Installing : perl-Pod-Usage-4:1.69-40 [=== ] 37/62
Installing : perl-Pod-Usage-4:1.69-40 [======== ] 37/62
Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 37/62
Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 37/62
Installing : m4-1.4.18-5.fc28.riscv64 [ ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [= ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 38/62
Installing : m4-1.4.18-5.fc28.riscv64 38/62
Running scriptlet: m4-1.4.18-5.fc28.riscv64 38/62
Installing : kernel-headers-4.15.0-1. [ ] 39/62
Installing : kernel-headers-4.15.0-1. [= ] 39/62
Installing : kernel-headers-4.15.0-1. [== ] 39/62
Installing : kernel-headers-4.15.0-1. [=== ] 39/62
Installing : kernel-headers-4.15.0-1. [==== ] 39/62
Installing : kernel-headers-4.15.0-1. [===== ] 39/62
Installing : kernel-headers-4.15.0-1. [====== ] 39/62
Installing : kernel-headers-4.15.0-1. [======= ] 39/62
Installing : kernel-headers-4.15.0-1. [======== ] 39/62
Installing : kernel-headers-4.15.0-1. [========= ] 39/62
Installing : kernel-headers-4.15.0-1. [========== ] 39/62
Installing : kernel-headers-4.15.0-1. [=========== ] 39/62
Installing : kernel-headers-4.15.0-1. [============ ] 39/62
Installing : kernel-headers-4.15.0-1. [============= ] 39/62
Installing : kernel-headers-4.15.0-1. [============== ] 39/62
Installing : kernel-headers-4.15.0-1. [=============== ] 39/62
Installing : kernel-headers-4.15.0-1. [================ ] 39/62
Installing : kernel-headers-4.15.0-1. [================= ] 39/62
Installing : kernel-headers-4.15.0-1. [================== ] 39/62
Installing : kernel-headers-4.15.0-1. [=================== ] 39/62
Installing : kernel-headers-4.15.0-1. [==================== ] 39/62
Installing : kernel-headers-4.15.0-1. [===================== ] 39/62
Installing : kernel-headers-4.15.0-1. [====================== ] 39/62
Installing : kernel-headers-4.15.0-1. [======================= ] 39/62
Installing : kernel-headers-4.15.0-1. [======================== ] 39/62
Installing : kernel-headers-4.15.0-1.fc27.noarch 39/62
Installing : libpkgconf-1.4.1-1.fc27. [ ] 40/62
Installing : libpkgconf-1.4.1-1.fc27. [=== ] 40/62
Installing : libpkgconf-1.4.1-1.fc27. [======= ] 40/62
Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 40/62
Installing : libpkgconf-1.4.1-1.fc27. [============== ] 40/62
Installing : libpkgconf-1.4.1-1.fc27. [================== ] 40/62
Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 40/62
Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 40/62
Installing : libpkgconf-1.4.1-1.fc27.riscv64 40/62
Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 40/62
Installing : pkgconf-1.4.1-1.fc27.ris [ ] 41/62
Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 41/62
Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 41/62
Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 41/62
Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 41/62
Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 41/62
Installing : pkgconf-1.4.1-1.fc27.riscv64 41/62
Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 42/62
Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 42/62
Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 42/62
Installing : pkgconf-m4-1.4.1-1.fc27.noarch 42/62
Installing : pkgconf-pkg-config-1.4.1 [ ] 43/62
Installing : pkgconf-pkg-config-1.4.1 [==== ] 43/62
Installing : pkgconf-pkg-config-1.4.1 [===== ] 43/62
Installing : pkgconf-pkg-config-1.4.1 [======================= ] 43/62
Installing : pkgconf-pkg-config-1.4.1 [======================== ] 43/62
Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 43/62
Installing : zlib-devel-1.2.11-4.fc28 [ ] 44/62
Installing : zlib-devel-1.2.11-4.fc28 [== ] 44/62
Installing : zlib-devel-1.2.11-4.fc28 [======== ] 44/62
Installing : zlib-devel-1.2.11-4.fc28 [============= ] 44/62
Installing : zlib-devel-1.2.11-4.fc28 [=================== ] 44/62
Installing : zlib-devel-1.2.11-4.fc28 [==================== ] 44/62
Installing : zlib-devel-1.2.11-4.fc28 [======================= ] 44/62
Installing : zlib-devel-1.2.11-4.fc28 [======================== ] 44/62
Installing : zlib-devel-1.2.11-4.fc28.riscv64 44/62
Installing : libsepol-devel-2.7-3.fc2 [ ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [= ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [=== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [==== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [===== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [====== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [======= ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [======== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [========= ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [========== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [=========== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [============ ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [============= ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [============== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [=============== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [==================== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [===================== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [====================== ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [======================= ] 45/62
Installing : libsepol-devel-2.7-3.fc2 [======================== ] 45/62
Installing : libsepol-devel-2.7-3.fc28.riscv64 45/62
Installing : pcre2-utf32-10.31-0.3.RC [ ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [= ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [=== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [==== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [===== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [====== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [======= ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [======== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [========= ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [========== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [=========== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [============ ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [============= ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [============== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [=============== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [================ ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [================= ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [================== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [=================== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [==================== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [===================== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [====================== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [======================= ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC [======================== ] 46/62
Installing : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 46/62
Installing : pcre2-utf16-10.31-0.3.RC [ ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [= ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [=== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [==== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [===== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [====== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [======= ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [======== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [========= ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [========== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [=========== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [============ ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [============= ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [============== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [=============== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [================ ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [================= ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [================== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [=================== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [==================== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [===================== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [====================== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [======================= ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC [======================== ] 47/62
Installing : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 47/62
Installing : pcre2-devel-10.31-0.3.RC [ ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [= ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [=== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [==== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [===== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [====== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [======= ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [======== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [========= ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [========== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [=========== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [============ ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [============= ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [============== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [=============== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [================ ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [================= ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [================== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [=================== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [==================== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [===================== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [====================== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [======================= ] 48/62
Installing : pcre2-devel-10.31-0.3.RC [======================== ] 48/62
Installing : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 48/62
Installing : ncurses-c++-libs-6.1-2.2 [ ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [= ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [=== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [==== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [===== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [====== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [======= ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [======== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [========= ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [========== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [=========== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [============ ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [============= ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [============== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [=============== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [================ ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [================= ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [================== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [=================== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [==================== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [===================== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [====================== ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [======================= ] 49/62
Installing : ncurses-c++-libs-6.1-2.2 [======================== ] 49/62
Installing : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 49/62
Installing : ncurses-devel-6.1-2.2018 [ ] 50/62
Installing : ncurses-devel-6.1-2.2018 [= ] 50/62
Installing : ncurses-devel-6.1-2.2018 [== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [=== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [==== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [===== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [====== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [======= ] 50/62
Installing : ncurses-devel-6.1-2.2018 [======== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [========= ] 50/62
Installing : ncurses-devel-6.1-2.2018 [========== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [=========== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [============ ] 50/62
Installing : ncurses-devel-6.1-2.2018 [============= ] 50/62
Installing : ncurses-devel-6.1-2.2018 [============== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [=============== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [================ ] 50/62
Installing : ncurses-devel-6.1-2.2018 [================= ] 50/62
Installing : ncurses-devel-6.1-2.2018 [================== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [=================== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [==================== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [===================== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [====================== ] 50/62
Installing : ncurses-devel-6.1-2.2018 [======================= ] 50/62
Installing : ncurses-devel-6.1-2.2018 [======================== ] 50/62
Installing : ncurses-devel-6.1-2.20180129.fc27.riscv64 50/62
Installing : libedit-3.1-20.20170329c [ ] 51/62
Installing : libedit-3.1-20.20170329c [= ] 51/62
Installing : libedit-3.1-20.20170329c [== ] 51/62
Installing : libedit-3.1-20.20170329c [=== ] 51/62
Installing : libedit-3.1-20.20170329c [==== ] 51/62
Installing : libedit-3.1-20.20170329c [===== ] 51/62
Installing : libedit-3.1-20.20170329c [====== ] 51/62
Installing : libedit-3.1-20.20170329c [======= ] 51/62
Installing : libedit-3.1-20.20170329c [======== ] 51/62
Installing : libedit-3.1-20.20170329c [========= ] 51/62
Installing : libedit-3.1-20.20170329c [========== ] 51/62
Installing : libedit-3.1-20.20170329c [=========== ] 51/62
Installing : libedit-3.1-20.20170329c [============ ] 51/62
Installing : libedit-3.1-20.20170329c [============= ] 51/62
Installing : libedit-3.1-20.20170329c [============== ] 51/62
Installing : libedit-3.1-20.20170329c [=============== ] 51/62
Installing : libedit-3.1-20.20170329c [================ ] 51/62
Installing : libedit-3.1-20.20170329c [================= ] 51/62
Installing : libedit-3.1-20.20170329c [================== ] 51/62
Installing : libedit-3.1-20.20170329c [=================== ] 51/62
Installing : libedit-3.1-20.20170329c [==================== ] 51/62
Installing : libedit-3.1-20.20170329c [===================== ] 51/62
Installing : libedit-3.1-20.20170329c [====================== ] 51/62
Installing : libedit-3.1-20.20170329c [======================= ] 51/62
Installing : libedit-3.1-20.20170329c [======================== ] 51/62
Installing : libedit-3.1-20.20170329cvs.fc28.riscv64 51/62
Running scriptlet: libedit-3.1-20.20170329cvs.fc28.riscv64 51/62
Installing : emacs-filesystem-1:25.3- [ ] 52/62
Installing : emacs-filesystem-1:25.3- [===== ] 52/62
Installing : emacs-filesystem-1:25.3- [============ ] 52/62
Installing : emacs-filesystem-1:25.3- [=================== ] 52/62
Installing : emacs-filesystem-1:25.3-5.fc28.noarch 52/62
Installing : autoconf-2.69-26.fc28.no [ ] 53/62
Installing : autoconf-2.69-26.fc28.no [= ] 53/62
Installing : autoconf-2.69-26.fc28.no [== ] 53/62
Installing : autoconf-2.69-26.fc28.no [=== ] 53/62
Installing : autoconf-2.69-26.fc28.no [==== ] 53/62
Installing : autoconf-2.69-26.fc28.no [===== ] 53/62
Installing : autoconf-2.69-26.fc28.no [====== ] 53/62
Installing : autoconf-2.69-26.fc28.no [======= ] 53/62
Installing : autoconf-2.69-26.fc28.no [======== ] 53/62
Installing : autoconf-2.69-26.fc28.no [========= ] 53/62
Installing : autoconf-2.69-26.fc28.no [========== ] 53/62
Installing : autoconf-2.69-26.fc28.no [=========== ] 53/62
Installing : autoconf-2.69-26.fc28.no [============ ] 53/62
Installing : autoconf-2.69-26.fc28.no [============= ] 53/62
Installing : autoconf-2.69-26.fc28.no [============== ] 53/62
Installing : autoconf-2.69-26.fc28.no [=============== ] 53/62
Installing : autoconf-2.69-26.fc28.no [================ ] 53/62
Installing : autoconf-2.69-26.fc28.no [================= ] 53/62
Installing : autoconf-2.69-26.fc28.no [================== ] 53/62
Installing : autoconf-2.69-26.fc28.no [=================== ] 53/62
Installing : autoconf-2.69-26.fc28.no [==================== ] 53/62
Installing : autoconf-2.69-26.fc28.no [===================== ] 53/62
Installing : autoconf-2.69-26.fc28.no [====================== ] 53/62
Installing : autoconf-2.69-26.fc28.no [======================= ] 53/62
Installing : autoconf-2.69-26.fc28.no [======================== ] 53/62
Installing : autoconf-2.69-26.fc28.noarch 53/62
Running scriptlet: autoconf-2.69-26.fc28.noarch 53/62
Installing : automake-1.15.1-3.fc28.n [ ] 54/62
Installing : automake-1.15.1-3.fc28.n [= ] 54/62
Installing : automake-1.15.1-3.fc28.n [== ] 54/62
Installing : automake-1.15.1-3.fc28.n [=== ] 54/62
Installing : automake-1.15.1-3.fc28.n [==== ] 54/62
Installing : automake-1.15.1-3.fc28.n [===== ] 54/62
Installing : automake-1.15.1-3.fc28.n [====== ] 54/62
Installing : automake-1.15.1-3.fc28.n [======= ] 54/62
Installing : automake-1.15.1-3.fc28.n [======== ] 54/62
Installing : automake-1.15.1-3.fc28.n [========= ] 54/62
Installing : automake-1.15.1-3.fc28.n [========== ] 54/62
Installing : automake-1.15.1-3.fc28.n [=========== ] 54/62
Installing : automake-1.15.1-3.fc28.n [============ ] 54/62
Installing : automake-1.15.1-3.fc28.n [============= ] 54/62
Installing : automake-1.15.1-3.fc28.n [============== ] 54/62
Installing : automake-1.15.1-3.fc28.n [=============== ] 54/62
Installing : automake-1.15.1-3.fc28.n [================ ] 54/62
Installing : automake-1.15.1-3.fc28.n [================= ] 54/62
Installing : automake-1.15.1-3.fc28.n [================== ] 54/62
Installing : automake-1.15.1-3.fc28.n [=================== ] 54/62
Installing : automake-1.15.1-3.fc28.n [==================== ] 54/62
Installing : automake-1.15.1-3.fc28.n [===================== ] 54/62
Installing : automake-1.15.1-3.fc28.n [====================== ] 54/62
Installing : automake-1.15.1-3.fc28.n [======================= ] 54/62
Installing : automake-1.15.1-3.fc28.n [======================== ] 54/62
Installing : automake-1.15.1-3.fc28.noarch 54/62
Running scriptlet: automake-1.15.1-3.fc28.noarch 54/62
Installing : libedit-devel-3.1-20.201 [ ] 55/62
Installing : libedit-devel-3.1-20.201 [=== ] 55/62
Installing : libedit-devel-3.1-20.201 [====== ] 55/62
Installing : libedit-devel-3.1-20.201 [======= ] 55/62
Installing : libedit-devel-3.1-20.201 [=========== ] 55/62
Installing : libedit-devel-3.1-20.201 [============== ] 55/62
Installing : libedit-devel-3.1-20.201 [================= ] 55/62
Installing : libedit-devel-3.1-20.201 [=================== ] 55/62
Installing : libedit-devel-3.1-20.201 [==================== ] 55/62
Installing : libedit-devel-3.1-20.201 [===================== ] 55/62
Installing : libedit-devel-3.1-20.201 [====================== ] 55/62
Installing : libedit-devel-3.1-20.201 [======================== ] 55/62
Installing : libedit-devel-3.1-20.20170329cvs.fc28.riscv64 55/62
Installing : libselinux-devel-2.7-11. [ ] 56/62
Installing : libselinux-devel-2.7-11. [=== ] 56/62
Installing : libselinux-devel-2.7-11. [======= ] 56/62
Installing : libselinux-devel-2.7-11. [========= ] 56/62
Installing : libselinux-devel-2.7-11. [========== ] 56/62
Installing : libselinux-devel-2.7-11. [=========== ] 56/62
Installing : libselinux-devel-2.7-11. [============== ] 56/62
Installing : libselinux-devel-2.7-11. [=============== ] 56/62
Installing : libselinux-devel-2.7-11. [================ ] 56/62
Installing : libselinux-devel-2.7-11. [================= ] 56/62
Installing : libselinux-devel-2.7-11. [================== ] 56/62
Installing : libselinux-devel-2.7-11. [=================== ] 56/62
Installing : libselinux-devel-2.7-11. [==================== ] 56/62
Installing : libselinux-devel-2.7-11. [===================== ] 56/62
Installing : libselinux-devel-2.7-11. [====================== ] 56/62
Installing : libselinux-devel-2.7-11. [======================= ] 56/62
Installing : libselinux-devel-2.7-11. [======================== ] 56/62
Installing : libselinux-devel-2.7-11.0.riscv64.fc28.riscv64 56/62
Installing : openssl-devel-1:1.1.0g-2 [ ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [= ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [=== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [==== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [===== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [====== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [======= ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [======== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [========= ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [========== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [=========== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [============ ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [============= ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [============== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [=============== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [================ ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [================= ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [================== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [=================== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [==================== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [===================== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [====================== ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [======================= ] 57/62
Installing : openssl-devel-1:1.1.0g-2 [======================== ] 57/62
Installing : openssl-devel-1:1.1.0g-2.fc28.riscv64 57/62
Installing : audit-libs-devel-2.8.2-4 [ ] 58/62
Installing : audit-libs-devel-2.8.2-4 [== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [======== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [========= ] 58/62
Installing : audit-libs-devel-2.8.2-4 [========== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [=========== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [============ ] 58/62
Installing : audit-libs-devel-2.8.2-4 [============= ] 58/62
Installing : audit-libs-devel-2.8.2-4 [============== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [=============== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [================ ] 58/62
Installing : audit-libs-devel-2.8.2-4 [================= ] 58/62
Installing : audit-libs-devel-2.8.2-4 [================== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [=================== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [==================== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [===================== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [====================== ] 58/62
Installing : audit-libs-devel-2.8.2-4 [======================= ] 58/62
Installing : audit-libs-devel-2.8.2-4 [======================== ] 58/62
Installing : audit-libs-devel-2.8.2-4.0.riscv64.fc28.riscv64 58/62
Installing : perl-generators-1.10-6.f [ ] 59/62
Installing : perl-generators-1.10-6.f [======== ] 59/62
Installing : perl-generators-1.10-6.f [===================== ] 59/62
Installing : perl-generators-1.10-6.f [======================= ] 59/62
Installing : perl-generators-1.10-6.f [======================== ] 59/62
Installing : perl-generators-1.10-6.fc27.noarch 59/62
Installing : fipscheck-devel-1.5.0-3. [ ] 60/62
Installing : fipscheck-devel-1.5.0-3. [============= ] 60/62
Installing : fipscheck-devel-1.5.0-3. [============== ] 60/62
Installing : fipscheck-devel-1.5.0-3. [=============== ] 60/62
Installing : fipscheck-devel-1.5.0-3. [================ ] 60/62
Installing : fipscheck-devel-1.5.0-3. [====================== ] 60/62
Installing : fipscheck-devel-1.5.0-3. [======================= ] 60/62
Installing : fipscheck-devel-1.5.0-3. [======================== ] 60/62
Installing : fipscheck-devel-1.5.0-3.fc28.riscv64 60/62
Installing : groff-1.22.3-8.fc27.risc [ ] 61/62
Installing : groff-1.22.3-8.fc27.risc [= ] 61/62
Installing : groff-1.22.3-8.fc27.risc [== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [=== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [==== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [===== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [====== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [======= ] 61/62
Installing : groff-1.22.3-8.fc27.risc [======== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [========= ] 61/62
Installing : groff-1.22.3-8.fc27.risc [========== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [=========== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [============ ] 61/62
Installing : groff-1.22.3-8.fc27.risc [============= ] 61/62
Installing : groff-1.22.3-8.fc27.risc [============== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [=============== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [================ ] 61/62
Installing : groff-1.22.3-8.fc27.risc [================= ] 61/62
Installing : groff-1.22.3-8.fc27.risc [================== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [=================== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [==================== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [===================== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [====================== ] 61/62
Installing : groff-1.22.3-8.fc27.risc [======================= ] 61/62
Installing : groff-1.22.3-8.fc27.risc [======================== ] 61/62
Installing : groff-1.22.3-8.fc27.riscv64 61/62
Running scriptlet: groff-1.22.3-8.fc27.riscv64 61/62
Installing : pam-devel-1.3.0-1.fc27.r [ ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [===== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [====== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [======= ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [======== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [========= ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [========== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [=========== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [============ ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [============= ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [============== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [=============== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [================ ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [================= ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [================== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [=================== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [==================== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [===================== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [====================== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [======================= ] 62/62
Installing : pam-devel-1.3.0-1.fc27.r [======================== ] 62/62
Installing : pam-devel-1.3.0-1.fc27.riscv64 62/62
Running scriptlet: pam-devel-1.3.0-1.fc27.riscv64 62/62
Verifying : audit-libs-devel-2.8.2-4.0.riscv64.fc28.riscv64 1/62
Verifying : groff-1.22.3-8.fc27.riscv64 2/62
Verifying : pam-devel-1.3.0-1.fc27.riscv64 3/62
Verifying : perl-generators-1.10-6.fc27.noarch 4/62
Verifying : openssl-devel-1:1.1.0g-2.fc28.riscv64 5/62
Verifying : perl-Fedora-VSP-0.001-8.fc27.noarch 6/62
Verifying : autoconf-2.69-26.fc28.noarch 7/62
Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 8/62
Verifying : automake-1.15.1-3.fc28.noarch 9/62
Verifying : fipscheck-devel-1.5.0-3.fc28.riscv64 10/62
Verifying : fipscheck-lib-1.5.0-3.fc28.riscv64 11/62
Verifying : fipscheck-1.5.0-3.fc28.riscv64 12/62
Verifying : libedit-devel-3.1-20.20170329cvs.fc28.riscv64 13/62
Verifying : libedit-3.1-20.20170329cvs.fc28.riscv64 14/62
Verifying : libselinux-devel-2.7-11.0.riscv64.fc28.riscv64 15/62
Verifying : ncurses-devel-6.1-2.20180129.fc27.riscv64 16/62
Verifying : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 17/62
Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 18/62
Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 19/62
Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 20/62
Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 21/62
Verifying : zlib-devel-1.2.11-4.fc28.riscv64 22/62
Verifying : libsepol-devel-2.7-3.fc28.riscv64 23/62
Verifying : pcre2-devel-10.31-0.3.RC1.fc28.1.riscv64 24/62
Verifying : pcre2-utf16-10.31-0.3.RC1.fc28.1.riscv64 25/62
Verifying : pcre2-utf32-10.31-0.3.RC1.fc28.1.riscv64 26/62
Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 27/62
Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 28/62
Verifying : pkgconf-1.4.1-1.fc27.riscv64 29/62
Verifying : libpkgconf-1.4.1-1.fc27.riscv64 30/62
Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 31/62
Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 32/62
Verifying : perl-File-Path-2.15-1.fc27.noarch 33/62
Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 34/62
Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 35/62
Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 36/62
Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 37/62
Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 38/62
Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 39/62
Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 40/62
Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 41/62
Verifying : perl-threads-1:2.21-1.fc27.riscv64 42/62
Verifying : perl-threads-shared-1.58-1.fc27.riscv64 43/62
Verifying : perl-Socket-4:2.027-1.fc27.riscv64 44/62
Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 45/62
Verifying : kernel-headers-4.15.0-1.fc27.noarch 46/62
Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 47/62
Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 48/62
Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 49/62
Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 50/62
Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 51/62
Verifying : perl-Encode-4:2.94-16.fc27.riscv64 52/62
Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 53/62
Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 54/62
Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 55/62
Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 56/62
Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 57/62
Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 58/62
Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 59/62
Verifying : m4-1.4.18-5.fc28.riscv64 60/62
Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 61/62
Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 62/62
Installed:
audit-libs-devel.riscv64 2.8.2-4.0.riscv64.fc28
autoconf.noarch 2.69-26.fc28
automake.noarch 1.15.1-3.fc28
fipscheck-devel.riscv64 1.5.0-3.fc28
groff.riscv64 1.22.3-8.fc27
libedit-devel.riscv64 3.1-20.20170329cvs.fc28
libselinux-devel.riscv64 2.7-11.0.riscv64.fc28
ncurses-devel.riscv64 6.1-2.20180129.fc27
openssl-devel.riscv64 1:1.1.0g-2.fc28
pam-devel.riscv64 1.3.0-1.fc27
perl-generators.noarch 1.10-6.fc27
perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-podlators.noarch 4.09-408.fc27.0.riscv64
zlib-devel.riscv64 1.2.11-4.fc28
emacs-filesystem.noarch 1:25.3-5.fc28
fipscheck.riscv64 1.5.0-3.fc28
fipscheck-lib.riscv64 1.5.0-3.fc28
kernel-headers.noarch 4.15.0-1.fc27
libedit.riscv64 3.1-20.20170329cvs.fc28
libpkgconf.riscv64 1.4.1-1.fc27
libsepol-devel.riscv64 2.7-3.fc28
m4.riscv64 1.4.18-5.fc28
ncurses-c++-libs.riscv64 6.1-2.20180129.fc27
pcre2-devel.riscv64 10.31-0.3.RC1.fc28.1
pcre2-utf16.riscv64 10.31-0.3.RC1.fc28.1
pcre2-utf32.riscv64 10.31-0.3.RC1.fc28.1
perl-Carp.noarch 1.42-408.fc27.0.riscv64
perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64
perl-Encode.riscv64 4:2.94-16.fc27
perl-Errno.riscv64 1.28-408.fc28.1.riscv64
perl-Exporter.noarch 5.72-408.fc27.0.riscv64
perl-Fedora-VSP.noarch 0.001-8.fc27
perl-File-Path.noarch 2.15-1.fc27
perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64
perl-Getopt-Long.noarch 1:2.50-3.fc27
perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64
perl-IO.riscv64 1.38-408.fc28.1.riscv64
perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64
perl-PathTools.riscv64 3.67-408.fc27.0.riscv64
perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64
perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64
perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64
perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64
perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27
perl-Socket.riscv64 4:2.027-1.fc27
perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64
perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64
perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64
perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64
perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64
perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64
perl-Time-Local.noarch 1:1.250-394.fc27
perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64
perl-constant.noarch 1.33-408.fc27.0.riscv64
perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-parent.noarch 1:0.236-408.fc27.0.riscv64
perl-threads.riscv64 1:2.21-1.fc27
perl-threads-shared.riscv64 1.58-1.fc27
pkgconf.riscv64 1.4.1-1.fc27
pkgconf-m4.noarch 1.4.1-1.fc27
pkgconf-pkg-config.riscv64 1.4.1-1.fc27
Complete!
+ dnf -y update --best
Last metadata expiration check: 0:06:00 ago on Wed Feb 21 13:04:35 2018.
Dependencies resolved.
Nothing to do.
Complete!
+ dnf -y group install buildsys-build
Last metadata expiration check: 0:06:20 ago on Wed Feb 21 13:04:35 2018.
No match for group package "gcc-c++"
No match for group package "gcc"
Dependencies resolved.
================================================================================
Group Packages
================================================================================
Marking packages as installed by the group:
@Buildsystem building group info which bash
fedora-release sed grep
redhat-rpm-config findutils util-linux
diffutils rpm-build unzip
tar bzip2 cpio
gzip shadow-utils xz
patch make gawk
coreutils
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing group packages:
bzip2 riscv64 1.0.6-24.fc28 local 81 k
diffutils riscv64 3.6-3.fc28 local 577 k
make riscv64 1:4.2.1-6.fc27 local 486 k
patch riscv64 2.7.5-6.fc27 local 270 k
redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k
rpm-build riscv64 4.14.1-6.fc28.1 local 235 k
tar riscv64 2:1.29-7.fc27 local 805 k
unzip riscv64 6.0-36.fc28 local 398 k
which riscv64 2.21-4.fc28 local 65 k
xz riscv64 5.2.3-5.fc28 local 212 k
Installing dependencies:
binutils riscv64 2.30-1.fc28 local 6.9 M
dwz riscv64 0.12-5.fc28 local 108 k
elfutils riscv64 0.170-4.fc28 local 791 k
file riscv64 5.32-3.fc28 local 81 k
fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k
ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k
gnat-srpm-macros noarch 4-5.fc28 local 8.8 k
go-srpm-macros noarch 2-11.fc28 local 8.4 k
nim-srpm-macros noarch 1-1.fc28 local 7.6 k
ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k
openblas-srpm-macros noarch 2-2.fc27 local 6.6 k
perl-srpm-macros noarch 1-26.fc28 local 9.7 k
python-srpm-macros noarch 3-26.fc28 local 10 k
qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k
rust-srpm-macros noarch 5-1.fc28 local 8.0 k
zip riscv64 3.0-20.fc28 local 271 k
zstd riscv64 1.3.3-1.fc27 local 1.1 M
Transaction Summary
================================================================================
Install 27 Packages
Total download size: 12 M
Installed size: 50 M
Downloading Packages:
(1/27): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA
(1-3/27): tar-1.29-7 5% [= ] 2.2 MB/s | 671 kB 00:05 ETA
(1/27): make-4.2.1-6.fc27.riscv64.rpm 940 kB/s | 486 kB 00:00
(2-3/27): diffutils- 11% [== ] 2.2 MB/s | 1.4 MB 00:05 ETA
(2/27): redhat-rpm-config-96-1.fc28.0.riscv64.n 848 kB/s | 75 kB 00:00
(3-4/27): diffutils- 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA
(3/27): diffutils-3.6-3.fc28.riscv64.rpm 752 kB/s | 577 kB 00:00
(4-5/27): nim-srpm-m 13% [==- ] 2.2 MB/s | 1.7 MB 00:05 ETA
(4/27): nim-srpm-macros-1-1.fc28.noarch.rpm 73 kB/s | 7.6 kB 00:00
(5/27): tar-1.29-7.f 13% [==- ] 2.2 MB/s | 1.7 MB 00:05 ETA
(5/27): ocaml-srpm-macros-5-2.fc27.noarch.rpm 185 kB/s | 7.8 kB 00:00
(6-7/27): openblas-s 13% [==- ] 2.1 MB/s | 1.7 MB 00:05 ETA
(6/27): openblas-srpm-macros-2-2.fc27.noarch.rp 166 kB/s | 6.6 kB 00:00
(7/27): tar-1.29-7.f 13% [==- ] 2.1 MB/s | 1.7 MB 00:05 ETA
(7/27): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 206 kB/s | 9.0 kB 00:00
(8-9/27): rust-srpm- 14% [==- ] 2.1 MB/s | 1.8 MB 00:05 ETA
(8/27): rust-srpm-macros-5-1.fc28.noarch.rpm 193 kB/s | 8.0 kB 00:00
(9/27): tar-1.29-7.f 14% [==- ] 2.1 MB/s | 1.8 MB 00:05 ETA
(9/27): tar-1.29-7.fc27.riscv64.rpm 606 kB/s | 805 kB 00:01
(10-11/27): zstd-1.3 18% [===- ] 2.1 MB/s | 2.3 MB 00:04 ETA
(10/27): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 608 kB/s | 235 kB 00:00
(11-12/27): zstd-1.3 19% [===- ] 2.1 MB/s | 2.4 MB 00:04 ETA
(11/27): which-2.21-4.fc28.riscv64.rpm 421 kB/s | 65 kB 00:00
(12-13/27): zstd-1.3 20% [==== ] 2.1 MB/s | 2.5 MB 00:04 ETA
(12/27): patch-2.7.5-6.fc27.riscv64.rpm 786 kB/s | 270 kB 00:00
(13-14/27): zstd-1.3 25% [===== ] 2.1 MB/s | 3.2 MB 00:04 ETA
(13/27): unzip-6.0-36.fc28.riscv64.rpm 801 kB/s | 398 kB 00:00
(14-15/27): zstd-1.3 29% [=====- ] 2.1 MB/s | 3.7 MB 00:04 ETA
(14/27): xz-5.2.3-5.fc28.riscv64.rpm 656 kB/s | 212 kB 00:00
(15-16/27): zstd-1.3 31% [====== ] 2.1 MB/s | 3.9 MB 00:04 ETA
(15/27): bzip2-1.0.6-24.fc28.riscv64.rpm 473 kB/s | 81 kB 00:00
(16-17/27): zstd-1.3 31% [====== ] 2.0 MB/s | 3.9 MB 00:04 ETA
(16/27): file-5.32-3.fc28.riscv64.rpm 745 kB/s | 81 kB 00:00
(17-18/27): zstd-1.3 33% [======- ] 2.0 MB/s | 4.2 MB 00:04 ETA
(17-19/27): zstd-1.3 40% [======== ] 2.1 MB/s | 5.1 MB 00:03 ETA
(17/27): zstd-1.3.3-1.fc27.riscv64.rpm 660 kB/s | 1.1 MB 00:01
(18-19/27): binutils 40% [======== ] 2.1 MB/s | 5.1 MB 00:03 ETA
(18/27): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 297 kB/s | 7.5 kB 00:00
(19-20/27): binutils 41% [======== ] 2.1 MB/s | 5.1 MB 00:03 ETA
(19/27): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 322 kB/s | 8.2 kB 00:00
(20-21/27): binutils 41% [======== ] 2.1 MB/s | 5.2 MB 00:03 ETA
(20/27): gnat-srpm-macros-4-5.fc28.noarch.rpm 294 kB/s | 8.8 kB 00:00
(21-22/27): binutils 41% [======== ] 2.1 MB/s | 5.2 MB 00:03 ETA
(21/27): go-srpm-macros-2-11.fc28.noarch.rpm 336 kB/s | 8.4 kB 00:00
(22-23/27): binutils 42% [======== ] 2.0 MB/s | 5.2 MB 00:03 ETA
(22/27): perl-srpm-macros-1-26.fc28.noarch.rpm 390 kB/s | 9.7 kB 00:00
(23-24/27): binutils 42% [======== ] 2.0 MB/s | 5.3 MB 00:03 ETA
(23/27): python-srpm-macros-3-26.fc28.noarch.rp 379 kB/s | 10 kB 00:00
(24-25/27): binutils 42% [========- ] 2.0 MB/s | 5.3 MB 00:03 ETA
(24/27): dwz-0.12-5.fc28.riscv64.rpm 864 kB/s | 108 kB 00:00
(25-26/27): binutils 45% [========= ] 2.0 MB/s | 5.7 MB 00:03 ETA
(25/27): elfutils-0.170-4.fc28.riscv64.rpm 580 kB/s | 791 kB 00:01
(26-27/27): binutils 49% [=========- ] 2.0 MB/s | 6.1 MB 00:03 ETA
(26/27): zip-3.0-20.fc28.riscv64.rpm 744 kB/s | 271 kB 00:00
(27/27): binutils-2. 50% [========== ] 2.0 MB/s | 6.3 MB 00:03 ETA
(27/27): binutils-2. 57% [===========- ] 2.1 MB/s | 7.2 MB 00:02 ETA
(27/27): binutils-2. 64% [============- ] 2.1 MB/s | 8.1 MB 00:02 ETA
(27/27): binutils-2. 71% [============== ] 2.1 MB/s | 8.9 MB 00:01 ETA
(27/27): binutils-2. 78% [===============- ] 2.2 MB/s | 9.8 MB 00:01 ETA
(27/27): binutils-2. 85% [================= ] 2.2 MB/s | 11 MB 00:00 ETA
(27/27): binutils-2. 92% [==================- ] 2.3 MB/s | 12 MB 00:00 ETA
(27/27): binutils-2. 99% [===================-] 2.3 MB/s | 12 MB 00:00 ETA
(27/27): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04
--------------------------------------------------------------------------------
Total 1.8 MB/s | 12 MB 00:06
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [= ] 1/1
Preparing : [=== ] 1/1
Preparing : [===== ] 1/1
Preparing : [======= ] 1/1
Preparing : [========= ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============ ] 1/1
Preparing : [============== ] 1/1
Preparing : [================ ] 1/1
Preparing : [================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [====================== ] 1/1
Preparing : [======================== ] 1/1
Preparing : [========================== ] 1/1
Preparing : [============================ ] 1/1
Preparing : [============================== ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================= ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [===================================== ] 1/1
Preparing : [======================================= ] 1/1
Preparing : [========================================= ] 1/1
Preparing : [=========================================== ] 1/1
Preparing : [============================================ ] 1/1
Preparing : [============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : 1/1
Installing : file-5.32-3.fc28.riscv64 [ ] 1/27
Installing : file-5.32-3.fc28.riscv64 [====== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/27
Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 1/27
Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv64 2/27
Installing : zip-3.0-20.fc28.riscv64 [ ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 3/27
Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 4/27
Installing : python-srpm-macros-3-26. [ ] 5/27
Installing : python-srpm-macros-3-26. [======================= ] 5/27
Installing : python-srpm-macros-3-26.fc28.noarch 5/27
Installing : perl-srpm-macros-1-26.fc [ ] 6/27
Installing : perl-srpm-macros-1-26.fc [====================== ] 6/27
Installing : perl-srpm-macros-1-26.fc28.noarch 6/27
Installing : go-srpm-macros-2-11.fc28 [ ] 7/27
Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/27
Installing : go-srpm-macros-2-11.fc28.noarch 7/27
Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/27
Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/27
Installing : gnat-srpm-macros-4-5.fc28.noarch 8/27
Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/27
Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/27
Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/27
Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/27
Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/27
Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/27
Installing : binutils-2.30-1.fc28.ris [ ] 11/27
Installing : binutils-2.30-1.fc28.ris [= ] 11/27
Installing : binutils-2.30-1.fc28.ris [== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=== ] 11/27
Installing : binutils-2.30-1.fc28.ris [==== ] 11/27
Installing : binutils-2.30-1.fc28.ris [===== ] 11/27
Installing : binutils-2.30-1.fc28.ris [====== ] 11/27
Installing : binutils-2.30-1.fc28.ris [======= ] 11/27
Installing : binutils-2.30-1.fc28.ris [======== ] 11/27
Installing : binutils-2.30-1.fc28.ris [========= ] 11/27
Installing : binutils-2.30-1.fc28.ris [========== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=========== ] 11/27
Installing : binutils-2.30-1.fc28.ris [============ ] 11/27
Installing : binutils-2.30-1.fc28.ris [============= ] 11/27
Installing : binutils-2.30-1.fc28.ris [============== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=============== ] 11/27
Installing : binutils-2.30-1.fc28.ris [================ ] 11/27
Installing : binutils-2.30-1.fc28.ris [================= ] 11/27
Installing : binutils-2.30-1.fc28.ris [================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [==================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [===================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [====================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [======================= ] 11/27
Installing : binutils-2.30-1.fc28.ris [======================== ] 11/27
Installing : binutils-2.30-1.fc28.riscv64 11/27
Running scriptlet: binutils-2.30-1.fc28.riscv64 11/27
Installing : elfutils-0.170-4.fc28.ri [ ] 12/27
Installing : elfutils-0.170-4.fc28.ri [= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [==== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [===== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [====== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [========= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [========== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [============ ] 12/27
Installing : elfutils-0.170-4.fc28.ri [============= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [============== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [================ ] 12/27
Installing : elfutils-0.170-4.fc28.ri [================= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/27
Installing : elfutils-0.170-4.fc28.riscv64 12/27
Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/27
Installing : bzip2-1.0.6-24.fc28.riscv64 13/27
Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 14/27
Installing : patch-2.7.5-6.fc27.riscv [ ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv64 15/27
Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv64 16/27
Installing : rust-srpm-macros-5-1.fc2 [ ] 17/27
Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/27
Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/27
Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/27
Installing : rust-srpm-macros-5-1.fc28.noarch 17/27
Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/27
Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/27
Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/27
Installing : openblas-srpm-macros-2-2 [ ] 19/27
Installing : openblas-srpm-macros-2-2 [================ ] 19/27
Installing : openblas-srpm-macros-2-2.fc27.noarch 19/27
Installing : ocaml-srpm-macros-5-2.fc [ ] 20/27
Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/27
Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/27
Installing : nim-srpm-macros-1-1.fc28 [ ] 21/27
Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/27
Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/27
Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/27
Installing : nim-srpm-macros-1-1.fc28.noarch 21/27
Installing : redhat-rpm-config-96-1.f [ ] 22/27
Installing : redhat-rpm-config-96-1.f [== ] 22/27
Installing : redhat-rpm-config-96-1.f [=== ] 22/27
Installing : redhat-rpm-config-96-1.f [========= ] 22/27
Installing : redhat-rpm-config-96-1.f [=========== ] 22/27
Installing : redhat-rpm-config-96-1.f [================= ] 22/27
Installing : redhat-rpm-config-96-1.f [================== ] 22/27
Installing : redhat-rpm-config-96-1.f [=================== ] 22/27
Installing : redhat-rpm-config-96-1.f [===================== ] 22/27
Installing : redhat-rpm-config-96-1.f [====================== ] 22/27
Installing : redhat-rpm-config-96-1.f [======================== ] 22/27
Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/27
Installing : diffutils-3.6-3.fc28.ris [ ] 23/27
Installing : diffutils-3.6-3.fc28.ris [= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [==== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [===== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [====== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [========= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [========== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [============ ] 23/27
Installing : diffutils-3.6-3.fc28.ris [============= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [============== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [================ ] 23/27
Installing : diffutils-3.6-3.fc28.ris [================= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/27
Installing : diffutils-3.6-3.fc28.riscv64 23/27
Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/27
Installing : tar-2:1.29-7.fc27.riscv6 [ ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv64 24/27
Running scriptlet: tar-2:1.29-7.fc27.riscv64 24/27
Installing : rpm-build-4.14.1-6.fc28. [ ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [==== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [===== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [====== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [======= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [======== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [========= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=========== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [============ ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [============== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=============== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [================ ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [================= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [==================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [===================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [====================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [======================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28.1.riscv64 25/27
Installing : which-2.21-4.fc28.riscv6 [ ] 26/27
Installing : which-2.21-4.fc28.riscv6 [===== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [=========== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [=============== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [================ ] 26/27
Installing : which-2.21-4.fc28.riscv6 [================= ] 26/27
Installing : which-2.21-4.fc28.riscv6 [================== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [======================== ] 26/27
Installing : which-2.21-4.fc28.riscv64 26/27
Running scriptlet: which-2.21-4.fc28.riscv64 26/27
Installing : make-1:4.2.1-6.fc27.risc [ ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [==== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [===== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [====== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [========= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [========== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=========== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [============ ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [============= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [============== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=============== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [================ ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [================= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [==================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [===================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [====================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======================= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======================== ] 27/27
Installing : make-1:4.2.1-6.fc27.riscv64 27/27
Running scriptlet: make-1:4.2.1-6.fc27.riscv64 27/27
Verifying : tar-2:1.29-7.fc27.riscv64 1/27
Verifying : diffutils-3.6-3.fc28.riscv64 2/27
Verifying : make-1:4.2.1-6.fc27.riscv64 3/27
Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/27
Verifying : nim-srpm-macros-1-1.fc28.noarch 5/27
Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/27
Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/27
Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/27
Verifying : rust-srpm-macros-5-1.fc28.noarch 9/27
Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/27
Verifying : zstd-1.3.3-1.fc27.riscv64 11/27
Verifying : which-2.21-4.fc28.riscv64 12/27
Verifying : patch-2.7.5-6.fc27.riscv64 13/27
Verifying : unzip-6.0-36.fc28.riscv64 14/27
Verifying : xz-5.2.3-5.fc28.riscv64 15/27
Verifying : bzip2-1.0.6-24.fc28.riscv64 16/27
Verifying : elfutils-0.170-4.fc28.riscv64 17/27
Verifying : file-5.32-3.fc28.riscv64 18/27
Verifying : binutils-2.30-1.fc28.riscv64 19/27
Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 20/27
Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 21/27
Verifying : gnat-srpm-macros-4-5.fc28.noarch 22/27
Verifying : go-srpm-macros-2-11.fc28.noarch 23/27
Verifying : perl-srpm-macros-1-26.fc28.noarch 24/27
Verifying : python-srpm-macros-3-26.fc28.noarch 25/27
Verifying : dwz-0.12-5.fc28.riscv64 26/27
Verifying : zip-3.0-20.fc28.riscv64 27/27
Installed:
bzip2.riscv64 1.0.6-24.fc28
diffutils.riscv64 3.6-3.fc28
make.riscv64 1:4.2.1-6.fc27
patch.riscv64 2.7.5-6.fc27
redhat-rpm-config.noarch 96-1.fc28.0.riscv64
rpm-build.riscv64 4.14.1-6.fc28.1
tar.riscv64 2:1.29-7.fc27
unzip.riscv64 6.0-36.fc28
which.riscv64 2.21-4.fc28
xz.riscv64 5.2.3-5.fc28
binutils.riscv64 2.30-1.fc28
dwz.riscv64 0.12-5.fc28
elfutils.riscv64 0.170-4.fc28
file.riscv64 5.32-3.fc28
fpc-srpm-macros.noarch 1.1-4.fc28
ghc-srpm-macros.noarch 1.4.2-7.fc28
gnat-srpm-macros.noarch 4-5.fc28
go-srpm-macros.noarch 2-11.fc28
nim-srpm-macros.noarch 1-1.fc28
ocaml-srpm-macros.noarch 5-2.fc27
openblas-srpm-macros.noarch 2-2.fc27
perl-srpm-macros.noarch 1-26.fc28
python-srpm-macros.noarch 3-26.fc28
qt5-srpm-macros.noarch 5.10.0-1.fc28
rust-srpm-macros.noarch 5-1.fc28
zip.riscv64 3.0-20.fc28
zstd.riscv64 1.3.3-1.fc27
Complete!
+ dnf -y install hack-gcc glibc-devel
Last metadata expiration check: 0:08:14 ago on Wed Feb 21 13:04:35 2018.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
glibc-devel riscv64 2.27-4.fc28 local 1.0 M
Installing dependencies:
glibc-headers riscv64 2.27-4.fc28 local 442 k
libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k
Transaction Summary
================================================================================
Install 3 Packages
Total download size: 1.4 M
Installed size: 3.0 M
Downloading Packages:
(1/3): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA
(1/3): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 540 kB/s | 15 kB 00:00
(2-3/3): glibc-devel 3% [- ] 615 kB/s | 46 kB 00:02 ETA
(2/3): glibc-headers-2.27-4.fc28.riscv64.rpm 1.1 MB/s | 442 kB 00:00
(3/3): glibc-devel-2 61% [============ ] 746 kB/s | 904 kB 00:00 ETA
(3/3): glibc-devel-2.27-4.fc28.riscv64.rpm 1.4 MB/s | 1.0 MB 00:00
--------------------------------------------------------------------------------
Total 1.8 MB/s | 1.4 MB 00:00
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [================ ] 1/1
Preparing : [================================= ] 1/1
Preparing : 1/1
Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 1/3
Installing : glibc-headers-2.27-4.fc28 [ ] 1/3
Installing : glibc-headers-2.27-4.fc28 [= ] 1/3
Installing : glibc-headers-2.27-4.fc28 [== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [=== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [==== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [===== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [====== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [======= ] 1/3
Installing : glibc-headers-2.27-4.fc28 [======== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [========= ] 1/3
Installing : glibc-headers-2.27-4.fc28 [========== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [=========== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [============ ] 1/3
Installing : glibc-headers-2.27-4.fc28 [============= ] 1/3
Installing : glibc-headers-2.27-4.fc28 [============== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [=============== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [================ ] 1/3
Installing : glibc-headers-2.27-4.fc28 [================= ] 1/3
Installing : glibc-headers-2.27-4.fc28 [================== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [=================== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [==================== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [===================== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [====================== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [======================= ] 1/3
Installing : glibc-headers-2.27-4.fc28 [======================== ] 1/3
Installing : glibc-headers-2.27-4.fc28 [========================= ] 1/3
Installing : glibc-headers-2.27-4.fc28.riscv64 1/3
Installing : libxcrypt-devel-4.0.0-4.f [ ] 2/3
Installing : libxcrypt-devel-4.0.0-4.f [============ ] 2/3
Installing : libxcrypt-devel-4.0.0-4.f [============= ] 2/3
Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 2/3
Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 2/3
Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 2/3
Installing : glibc-devel-2.27-4.fc28.r [ ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [= ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [=== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [==== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [===== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [====== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [======= ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [======== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [========= ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [========== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [=========== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [============ ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [============= ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [============== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [=============== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [================ ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [================= ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [================== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [=================== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [==================== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [===================== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [====================== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [======================= ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [======================== ] 3/3
Installing : glibc-devel-2.27-4.fc28.r [========================= ] 3/3
Installing : glibc-devel-2.27-4.fc28.riscv64 3/3
Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 3/3
Verifying : glibc-devel-2.27-4.fc28.riscv64 1/3
Verifying : glibc-headers-2.27-4.fc28.riscv64 2/3
Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/3
Installed:
glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28
libxcrypt-devel.riscv64 4.0.0-4.fc28
Complete!
+ touch /rootok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ mount.static -o remount,ro /
+ poweroff
reboot: Power down
Power off