OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 200K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Thu Feb 22 03:18:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link tentative
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
Welcome to the Fedora/RISC-V stage4 builder
+ set -e
+ dnf clean all
0 files removed
+ useradd -d /builddir mockbuild
+ su -c 'mkdir /builddir/build' mockbuild
+ echo '%_topdir /builddir/build'
+ su -c 'rpm -i /var/tmp/man-db-2.7.5-3.fc25.0.riscv64.src.rpm' mockbuild
warning: user rjones does not exist - using root
warning: group rjones does not exist - using root
warning: user rjones does not exist - using root
warning: group rjones does not exist - using root
warning: user rjones does not exist - using root
warning: group rjones does not exist - using root
warning: user rjones does not exist - using root
warning: group rjones does not exist - using root
warning: user rjones does not exist - using root
warning: group rjones does not exist - using root
+ dnf -y builddep /builddir/build/SPECS/man-db.spec
Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA
Local RPMS 7% [=- ] 3.0 MB/s | 930 kB 00:03 ETA
Local RPMS 14% [==- ] 3.0 MB/s | 1.7 MB 00:03 ETA
Local RPMS 23% [====- ] 3.0 MB/s | 2.7 MB 00:02 ETA
Local RPMS 31% [====== ] 3.0 MB/s | 3.7 MB 00:02 ETA
Local RPMS 40% [======== ] 3.0 MB/s | 4.7 MB 00:02 ETA
Local RPMS 48% [=========- ] 3.1 MB/s | 5.7 MB 00:01 ETA
Local RPMS 57% [===========- ] 3.1 MB/s | 6.7 MB 00:01 ETA
Local RPMS 59% [===========- ] 2.9 MB/s | 6.9 MB 00:01 ETA
Local RPMS 67% [=============- ] 2.9 MB/s | 7.9 MB 00:01 ETA
Local RPMS 76% [=============== ] 2.9 MB/s | 8.9 MB 00:00 ETA
Local RPMS 84% [================- ] 2.9 MB/s | 9.9 MB 00:00 ETA
Local RPMS 92% [==================- ] 2.9 MB/s | 11 MB 00:00 ETA
Local RPMS 2.3 MB/s | 12 MB 00:04
Last metadata expiration check: 0:01:24 ago on Thu Feb 22 03:18:36 2018.
Package less-487-5.fc28.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
gdbm-devel riscv64 1:1.14.1-1.fc28 local 63 k
gettext riscv64 0.19.8.1-14.fc28 local 812 k
groff riscv64 1.22.3-8.fc27 local 1.1 M
libpipeline-devel riscv64 1.5.0-2.fc28 local 31 k
zlib-devel riscv64 1.2.11-4.fc28 local 56 k
Installing dependencies:
gettext-libs riscv64 0.19.8.1-14.fc28 local 905 k
libcroco riscv64 0.6.12-4.fc28 local 314 k
libpkgconf riscv64 1.4.1-1.fc27 local 74 k
perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k
perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k
perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k
perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k
perl-File-Path noarch 2.15-1.fc27 local 37 k
perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k
perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k
perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k
perl-Socket riscv64 4:2.027-1.fc27 local 95 k
perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k
perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k
perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k
perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M
perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M
perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k
perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k
perl-threads riscv64 1:2.21-1.fc27 local 104 k
perl-threads-shared riscv64 1.58-1.fc27 local 91 k
pkgconf riscv64 1.4.1-1.fc27 local 35 k
pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k
pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k
Transaction Summary
================================================================================
Install 29 Packages
Total download size: 15 M
Installed size: 44 M
Downloading Packages:
(1/29): gettext-0.19 0% [ ] --- B/s | 0 B --:-- ETA
(1-3/29): groff-1.22 5% [= ] 2.7 MB/s | 837 kB 00:05 ETA
(1-3/29): groff-1.22 10% [== ] 2.7 MB/s | 1.6 MB 00:04 ETA
(1-3/29): gettext-li 16% [=== ] 2.7 MB/s | 2.4 MB 00:04 ETA
(1/29): gettext-0.19.8.1-14.fc28.riscv64.rpm 796 kB/s | 812 kB 00:01
(2-3/29): groff-1.22 16% [=== ] 2.7 MB/s | 2.4 MB 00:04 ETA
(2/29): gettext-libs-0.19.8.1-14.fc28.riscv64.r 731 kB/s | 905 kB 00:01
(3-4/29): groff-1.22 17% [=== ] 2.6 MB/s | 2.6 MB 00:04 ETA
(3/29): gdbm-devel-1.14.1-1.fc28.riscv64.rpm 259 kB/s | 63 kB 00:00
(4/29): groff-1.22.3 17% [=== ] 2.6 MB/s | 2.6 MB 00:04 ETA
(4/29): libpipeline-devel-1.5.0-2.fc28.riscv64. 341 kB/s | 31 kB 00:00
(5-6/29): groff-1.22 18% [===- ] 2.6 MB/s | 2.7 MB 00:04 ETA
(5/29): zlib-devel-1.2.11-4.fc28.riscv64.rpm 397 kB/s | 56 kB 00:00
(6-7/29): groff-1.22 18% [===- ] 2.5 MB/s | 2.8 MB 00:04 ETA
(6/29): pkgconf-pkg-config-1.4.1-1.fc27.riscv64 258 kB/s | 14 kB 00:00
(7/29): groff-1.22.3 18% [===- ] 2.5 MB/s | 2.8 MB 00:04 ETA
(7/29): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 269 kB/s | 15 kB 00:00
(8-9/29): groff-1.22 18% [===- ] 2.5 MB/s | 2.8 MB 00:04 ETA
(8/29): pkgconf-1.4.1-1.fc27.riscv64.rpm 316 kB/s | 35 kB 00:00
(9-10/29): groff-1.2 19% [===- ] 2.5 MB/s | 2.9 MB 00:04 ETA
(9/29): libpkgconf-1.4.1-1.fc27.riscv64.rpm 453 kB/s | 74 kB 00:00
(10-11/29): perl-Dat 20% [==== ] 2.4 MB/s | 3.0 MB 00:04 ETA
(10/29): groff-1.22.3-8.fc27.riscv64.rpm 551 kB/s | 1.1 MB 00:02
(11-12/29): perl-Pat 21% [==== ] 2.4 MB/s | 3.3 MB 00:04 ETA
(11/29): perl-Data-Dumper-2.167-408.fc27.0.risc 313 kB/s | 149 kB 00:00
(12-13/29): perl-lib 22% [==== ] 2.3 MB/s | 3.3 MB 00:05 ETA
(12/29): perl-PathTools-3.67-408.fc27.0.riscv64 329 kB/s | 166 kB 00:00
(13-14/29): perl-int 23% [====- ] 2.3 MB/s | 3.5 MB 00:04 ETA
(13-15/29): perl-lib 28% [=====- ] 2.3 MB/s | 4.2 MB 00:04 ETA
(13/29): libcroco-0.6.12-4.fc28.riscv64.rpm 825 kB/s | 314 kB 00:00
(14-15/29): perl-lib 29% [=====- ] 2.3 MB/s | 4.5 MB 00:04 ETA
(14/29): perl-Carp-1.42-408.fc27.0.riscv64.noar 764 kB/s | 84 kB 00:00
(15-16/29): perl-lib 31% [====== ] 2.3 MB/s | 4.7 MB 00:04 ETA
(15/29): perl-Exporter-5.72-408.fc27.0.riscv64. 754 kB/s | 87 kB 00:00
(16-17/29): perl-lib 33% [======- ] 2.3 MB/s | 5.0 MB 00:04 ETA
(16/29): perl-File-Path-2.15-1.fc27.noarch.rpm 534 kB/s | 37 kB 00:00
(17-18/29): perl-lib 34% [======- ] 2.2 MB/s | 5.1 MB 00:04 ETA
(17/29): perl-Text-Tabs+Wrap-2013.0523-408.fc27 664 kB/s | 80 kB 00:00
(18-19/29): perl-lib 35% [======= ] 2.1 MB/s | 5.4 MB 00:04 ETA
(18/29): perl-constant-1.33-408.fc27.0.riscv64. 704 kB/s | 79 kB 00:00
(19-20/29): perl-lib 37% [======= ] 2.1 MB/s | 5.6 MB 00:04 ETA
(19/29): perl-parent-0.236-408.fc27.0.riscv64.n 606 kB/s | 71 kB 00:00
(20-21/29): perl-int 38% [=======- ] 2.1 MB/s | 5.8 MB 00:04 ETA
(20/29): perl-IO-1.38-408.fc28.1.riscv64.riscv6 723 kB/s | 176 kB 00:00
(21-22/29): perl-int 42% [======== ] 2.1 MB/s | 6.4 MB 00:04 ETA
(21/29): perl-Errno-1.28-408.fc28.1.riscv64.ris 589 kB/s | 73 kB 00:00
(22-23/29): perl-int 44% [========- ] 2.1 MB/s | 6.6 MB 00:04 ETA
(22/29): perl-Scalar-List-Utils-1.48-1.fc27.ris 689 kB/s | 119 kB 00:00
(23-24/29): perl-int 46% [========= ] 2.1 MB/s | 7.0 MB 00:03 ETA
(23/29): perl-Unicode-Normalize-1.25-408.fc27.0 774 kB/s | 164 kB 00:00
(24-25/29): perl-int 49% [=========- ] 2.1 MB/s | 7.5 MB 00:03 ETA
(24/29): perl-macros-5.26.1-408.fc28.1.riscv64. 706 kB/s | 69 kB 00:00
(25-26/29): perl-lib 51% [========== ] 2.1 MB/s | 7.7 MB 00:03 ETA
(25/29): perl-threads-2.21-1.fc27.riscv64.rpm 760 kB/s | 104 kB 00:00
(26-27/29): perl-lib 53% [==========- ] 2.1 MB/s | 8.0 MB 00:03 ETA
(26/29): perl-threads-shared-1.58-1.fc27.riscv6 662 kB/s | 91 kB 00:00
(27-28/29): perl-lib 55% [=========== ] 2.1 MB/s | 8.3 MB 00:03 ETA
(27/29): perl-Socket-2.027-1.fc27.riscv64.rpm 741 kB/s | 95 kB 00:00
(28-29/29): perl-lib 57% [===========- ] 2.0 MB/s | 8.6 MB 00:03 ETA
(28-29/29): perl-lib 63% [============- ] 2.1 MB/s | 9.4 MB 00:02 ETA
(28-29/29): perl-int 69% [=============- ] 2.1 MB/s | 10 MB 00:02 ETA
(28-29/29): perl-int 75% [=============== ] 2.2 MB/s | 11 MB 00:01 ETA
(28/29): perl-libs-5.26.1-408.fc28.1.riscv64.ri 746 kB/s | 3.3 MB 00:04
(29/29): perl-interp 77% [=============== ] 2.0 MB/s | 12 MB 00:01 ETA
(29/29): perl-interp 82% [================- ] 2.1 MB/s | 12 MB 00:01 ETA
(29/29): perl-interp 88% [=================- ] 2.1 MB/s | 13 MB 00:00 ETA
(29/29): perl-interp 94% [==================- ] 2.2 MB/s | 14 MB 00:00 ETA
(29/29): perl-interpreter-5.26.1-408.fc28.1.ris 1.0 MB/s | 6.7 MB 00:06
--------------------------------------------------------------------------------
Total 1.7 MB/s | 15 MB 00:08
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [= ] 1/1
Preparing : [=== ] 1/1
Preparing : [===== ] 1/1
Preparing : [====== ] 1/1
Preparing : [======== ] 1/1
Preparing : [========== ] 1/1
Preparing : [============ ] 1/1
Preparing : [============= ] 1/1
Preparing : [=============== ] 1/1
Preparing : [================= ] 1/1
Preparing : [================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [====================== ] 1/1
Preparing : [======================== ] 1/1
Preparing : [========================== ] 1/1
Preparing : [============================ ] 1/1
Preparing : [============================= ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================= ] 1/1
Preparing : [================================== ] 1/1
Preparing : [==================================== ] 1/1
Preparing : [====================================== ] 1/1
Preparing : [======================================== ] 1/1
Preparing : [========================================= ] 1/1
Preparing : [=========================================== ] 1/1
Preparing : [============================================= ] 1/1
Preparing : [=============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : 1/1
Installing : perl-Carp-1.42-408.fc27. [ ] 1/29
Installing : perl-Carp-1.42-408.fc27. [==== ] 1/29
Installing : perl-Carp-1.42-408.fc27. [======================== ] 1/29
Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 1/29
Installing : perl-Exporter-5.72-408.f [ ] 2/29
Installing : perl-Exporter-5.72-408.f [===== ] 2/29
Installing : perl-Exporter-5.72-408.f [======= ] 2/29
Installing : perl-Exporter-5.72-408.f [==================== ] 2/29
Installing : perl-Exporter-5.72-408.f [======================== ] 2/29
Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 2/29
Installing : perl-libs-4:5.26.1-408.f [ ] 3/29
Installing : perl-libs-4:5.26.1-408.f [= ] 3/29
Installing : perl-libs-4:5.26.1-408.f [== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [=== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [==== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [===== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [====== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [======= ] 3/29
Installing : perl-libs-4:5.26.1-408.f [======== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [========= ] 3/29
Installing : perl-libs-4:5.26.1-408.f [========== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [=========== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [============ ] 3/29
Installing : perl-libs-4:5.26.1-408.f [============= ] 3/29
Installing : perl-libs-4:5.26.1-408.f [============== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [=============== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [================ ] 3/29
Installing : perl-libs-4:5.26.1-408.f [================= ] 3/29
Installing : perl-libs-4:5.26.1-408.f [================== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [=================== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [==================== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [===================== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [====================== ] 3/29
Installing : perl-libs-4:5.26.1-408.f [======================= ] 3/29
Installing : perl-libs-4:5.26.1-408.f [======================== ] 3/29
Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 3/29
Installing : perl-Scalar-List-Utils-3 [ ] 4/29
Installing : perl-Scalar-List-Utils-3 [= ] 4/29
Installing : perl-Scalar-List-Utils-3 [== ] 4/29
Installing : perl-Scalar-List-Utils-3 [=== ] 4/29
Installing : perl-Scalar-List-Utils-3 [===== ] 4/29
Installing : perl-Scalar-List-Utils-3 [======== ] 4/29
Installing : perl-Scalar-List-Utils-3 [========== ] 4/29
Installing : perl-Scalar-List-Utils-3 [============= ] 4/29
Installing : perl-Scalar-List-Utils-3 [================ ] 4/29
Installing : perl-Scalar-List-Utils-3 [================== ] 4/29
Installing : perl-Scalar-List-Utils-3 [===================== ] 4/29
Installing : perl-Scalar-List-Utils-3 [====================== ] 4/29
Installing : perl-Scalar-List-Utils-3 [======================= ] 4/29
Installing : perl-Scalar-List-Utils-3 [======================== ] 4/29
Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/29
Installing : libcroco-0.6.12-4.fc28.r [ ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [= ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [=== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [==== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [===== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [====== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [======= ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [======== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [========= ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [========== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [=========== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [============ ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [============= ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [============== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [=============== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [================ ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [================= ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [================== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [=================== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [==================== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [===================== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [====================== ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [======================= ] 5/29
Installing : libcroco-0.6.12-4.fc28.r [======================== ] 5/29
Installing : libcroco-0.6.12-4.fc28.riscv64 5/29
Running scriptlet: libcroco-0.6.12-4.fc28.riscv64 5/29
Installing : gettext-libs-0.19.8.1-14 [ ] 6/29
Installing : gettext-libs-0.19.8.1-14 [= ] 6/29
Installing : gettext-libs-0.19.8.1-14 [== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [=== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [==== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [===== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [====== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [======= ] 6/29
Installing : gettext-libs-0.19.8.1-14 [======== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [========= ] 6/29
Installing : gettext-libs-0.19.8.1-14 [========== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [=========== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [============ ] 6/29
Installing : gettext-libs-0.19.8.1-14 [============= ] 6/29
Installing : gettext-libs-0.19.8.1-14 [============== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [=============== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [================ ] 6/29
Installing : gettext-libs-0.19.8.1-14 [================= ] 6/29
Installing : gettext-libs-0.19.8.1-14 [================== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [=================== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [==================== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [===================== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [====================== ] 6/29
Installing : gettext-libs-0.19.8.1-14 [======================= ] 6/29
Installing : gettext-libs-0.19.8.1-14 [======================== ] 6/29
Installing : gettext-libs-0.19.8.1-14.fc28.riscv64 6/29
Installing : perl-macros-4:5.26.1-408 [ ] 7/29
Installing : perl-macros-4:5.26.1-408 [======================== ] 7/29
Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 7/29
Installing : perl-File-Path-2.15-1.fc [ ] 8/29
Installing : perl-File-Path-2.15-1.fc [==== ] 8/29
Installing : perl-File-Path-2.15-1.fc [======== ] 8/29
Installing : perl-File-Path-2.15-1.fc [==================== ] 8/29
Installing : perl-File-Path-2.15-1.fc [======================== ] 8/29
Installing : perl-File-Path-2.15-1.fc27.noarch 8/29
Installing : perl-Text-Tabs+Wrap-2013 [ ] 9/29
Installing : perl-Text-Tabs+Wrap-2013 [=== ] 9/29
Installing : perl-Text-Tabs+Wrap-2013 [======== ] 9/29
Installing : perl-Text-Tabs+Wrap-2013 [========= ] 9/29
Installing : perl-Text-Tabs+Wrap-2013 [============== ] 9/29
Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 9/29
Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 9/29
Installing : perl-constant-1.33-408.f [ ] 10/29
Installing : perl-constant-1.33-408.f [======= ] 10/29
Installing : perl-constant-1.33-408.f [======================== ] 10/29
Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 10/29
Installing : perl-parent-1:0.236-408. [ ] 11/29
Installing : perl-parent-1:0.236-408. [============ ] 11/29
Installing : perl-parent-1:0.236-408. [======================== ] 11/29
Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 11/29
Installing : perl-Errno-1.28-408.fc28 [ ] 12/29
Installing : perl-Errno-1.28-408.fc28 [================= ] 12/29
Installing : perl-Errno-1.28-408.fc28 [======================== ] 12/29
Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 12/29
Installing : perl-Unicode-Normalize-1 [ ] 13/29
Installing : perl-Unicode-Normalize-1 [= ] 13/29
Installing : perl-Unicode-Normalize-1 [== ] 13/29
Installing : perl-Unicode-Normalize-1 [=== ] 13/29
Installing : perl-Unicode-Normalize-1 [==== ] 13/29
Installing : perl-Unicode-Normalize-1 [===== ] 13/29
Installing : perl-Unicode-Normalize-1 [====== ] 13/29
Installing : perl-Unicode-Normalize-1 [======= ] 13/29
Installing : perl-Unicode-Normalize-1 [======== ] 13/29
Installing : perl-Unicode-Normalize-1 [========= ] 13/29
Installing : perl-Unicode-Normalize-1 [========== ] 13/29
Installing : perl-Unicode-Normalize-1 [============ ] 13/29
Installing : perl-Unicode-Normalize-1 [============= ] 13/29
Installing : perl-Unicode-Normalize-1 [============== ] 13/29
Installing : perl-Unicode-Normalize-1 [=============== ] 13/29
Installing : perl-Unicode-Normalize-1 [================ ] 13/29
Installing : perl-Unicode-Normalize-1 [================= ] 13/29
Installing : perl-Unicode-Normalize-1 [================== ] 13/29
Installing : perl-Unicode-Normalize-1 [=================== ] 13/29
Installing : perl-Unicode-Normalize-1 [==================== ] 13/29
Installing : perl-Unicode-Normalize-1 [===================== ] 13/29
Installing : perl-Unicode-Normalize-1 [====================== ] 13/29
Installing : perl-Unicode-Normalize-1 [======================= ] 13/29
Installing : perl-Unicode-Normalize-1 [======================== ] 13/29
Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 13/29
Installing : perl-threads-shared-1.58 [ ] 14/29
Installing : perl-threads-shared-1.58 [=== ] 14/29
Installing : perl-threads-shared-1.58 [======= ] 14/29
Installing : perl-threads-shared-1.58 [========== ] 14/29
Installing : perl-threads-shared-1.58 [============== ] 14/29
Installing : perl-threads-shared-1.58 [================= ] 14/29
Installing : perl-threads-shared-1.58 [==================== ] 14/29
Installing : perl-threads-shared-1.58 [======================= ] 14/29
Installing : perl-threads-shared-1.58 [======================== ] 14/29
Installing : perl-threads-shared-1.58-1.fc27.riscv64 14/29
Installing : perl-threads-1:2.21-1.fc [ ] 15/29
Installing : perl-threads-1:2.21-1.fc [=== ] 15/29
Installing : perl-threads-1:2.21-1.fc [====== ] 15/29
Installing : perl-threads-1:2.21-1.fc [========= ] 15/29
Installing : perl-threads-1:2.21-1.fc [============= ] 15/29
Installing : perl-threads-1:2.21-1.fc [================ ] 15/29
Installing : perl-threads-1:2.21-1.fc [================== ] 15/29
Installing : perl-threads-1:2.21-1.fc [===================== ] 15/29
Installing : perl-threads-1:2.21-1.fc [====================== ] 15/29
Installing : perl-threads-1:2.21-1.fc [======================= ] 15/29
Installing : perl-threads-1:2.21-1.fc [======================== ] 15/29
Installing : perl-threads-1:2.21-1.fc27.riscv64 15/29
Installing : perl-Socket-4:2.027-1.fc [ ] 16/29
Installing : perl-Socket-4:2.027-1.fc [=== ] 16/29
Installing : perl-Socket-4:2.027-1.fc [======= ] 16/29
Installing : perl-Socket-4:2.027-1.fc [========== ] 16/29
Installing : perl-Socket-4:2.027-1.fc [============== ] 16/29
Installing : perl-Socket-4:2.027-1.fc [================= ] 16/29
Installing : perl-Socket-4:2.027-1.fc [==================== ] 16/29
Installing : perl-Socket-4:2.027-1.fc [===================== ] 16/29
Installing : perl-Socket-4:2.027-1.fc [====================== ] 16/29
Installing : perl-Socket-4:2.027-1.fc [======================= ] 16/29
Installing : perl-Socket-4:2.027-1.fc [======================== ] 16/29
Installing : perl-Socket-4:2.027-1.fc27.riscv64 16/29
Installing : perl-interpreter-4:5.26. [ ] 17/29random: crng init done
Installing : perl-interpreter-4:5.26. [= ] 17/29
Installing : perl-interpreter-4:5.26. [== ] 17/29
Installing : perl-interpreter-4:5.26. [=== ] 17/29
Installing : perl-interpreter-4:5.26. [==== ] 17/29
Installing : perl-interpreter-4:5.26. [===== ] 17/29
Installing : perl-interpreter-4:5.26. [====== ] 17/29
Installing : perl-interpreter-4:5.26. [======= ] 17/29
Installing : perl-interpreter-4:5.26. [======== ] 17/29
Installing : perl-interpreter-4:5.26. [========= ] 17/29
Installing : perl-interpreter-4:5.26. [========== ] 17/29
Installing : perl-interpreter-4:5.26. [=========== ] 17/29
Installing : perl-interpreter-4:5.26. [============ ] 17/29
Installing : perl-interpreter-4:5.26. [============= ] 17/29
Installing : perl-interpreter-4:5.26. [============== ] 17/29
Installing : perl-interpreter-4:5.26. [=============== ] 17/29
Installing : perl-interpreter-4:5.26. [================ ] 17/29
Installing : perl-interpreter-4:5.26. [================= ] 17/29
Installing : perl-interpreter-4:5.26. [================== ] 17/29
Installing : perl-interpreter-4:5.26. [=================== ] 17/29
Installing : perl-interpreter-4:5.26. [==================== ] 17/29
Installing : perl-interpreter-4:5.26. [===================== ] 17/29
Installing : perl-interpreter-4:5.26. [====================== ] 17/29
Installing : perl-interpreter-4:5.26. [======================= ] 17/29
Installing : perl-interpreter-4:5.26. [======================== ] 17/29
Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 17/29
Installing : perl-PathTools-3.67-408. [ ] 18/29
Installing : perl-PathTools-3.67-408. [== ] 18/29
Installing : perl-PathTools-3.67-408. [=== ] 18/29
Installing : perl-PathTools-3.67-408. [==== ] 18/29
Installing : perl-PathTools-3.67-408. [======= ] 18/29
Installing : perl-PathTools-3.67-408. [========= ] 18/29
Installing : perl-PathTools-3.67-408. [=========== ] 18/29
Installing : perl-PathTools-3.67-408. [============== ] 18/29
Installing : perl-PathTools-3.67-408. [================== ] 18/29
Installing : perl-PathTools-3.67-408. [==================== ] 18/29
Installing : perl-PathTools-3.67-408. [===================== ] 18/29
Installing : perl-PathTools-3.67-408. [====================== ] 18/29
Installing : perl-PathTools-3.67-408. [======================= ] 18/29
Installing : perl-PathTools-3.67-408. [======================== ] 18/29
Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 18/29
Installing : perl-IO-1.38-408.fc28.1. [ ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [= ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [=== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [==== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [===== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [====== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [======= ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [======== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [=========== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [============== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [================= ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [==================== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [===================== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [====================== ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [======================= ] 19/29
Installing : perl-IO-1.38-408.fc28.1. [======================== ] 19/29
Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 19/29
Installing : perl-Data-Dumper-2.167-4 [ ] 20/29
Installing : perl-Data-Dumper-2.167-4 [=== ] 20/29
Installing : perl-Data-Dumper-2.167-4 [==== ] 20/29
Installing : perl-Data-Dumper-2.167-4 [======== ] 20/29
Installing : perl-Data-Dumper-2.167-4 [============ ] 20/29
Installing : perl-Data-Dumper-2.167-4 [=============== ] 20/29
Installing : perl-Data-Dumper-2.167-4 [=================== ] 20/29
Installing : perl-Data-Dumper-2.167-4 [====================== ] 20/29
Installing : perl-Data-Dumper-2.167-4 [======================= ] 20/29
Installing : perl-Data-Dumper-2.167-4 [======================== ] 20/29
Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 20/29
Installing : libpkgconf-1.4.1-1.fc27. [ ] 21/29
Installing : libpkgconf-1.4.1-1.fc27. [=== ] 21/29
Installing : libpkgconf-1.4.1-1.fc27. [======= ] 21/29
Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 21/29
Installing : libpkgconf-1.4.1-1.fc27. [============== ] 21/29
Installing : libpkgconf-1.4.1-1.fc27. [================== ] 21/29
Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 21/29
Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 21/29
Installing : libpkgconf-1.4.1-1.fc27.riscv64 21/29
Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 21/29
Installing : pkgconf-1.4.1-1.fc27.ris [ ] 22/29
Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 22/29
Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 22/29
Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 22/29
Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 22/29
Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 22/29
Installing : pkgconf-1.4.1-1.fc27.riscv64 22/29
Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 23/29
Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 23/29
Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 23/29
Installing : pkgconf-m4-1.4.1-1.fc27.noarch 23/29
Installing : pkgconf-pkg-config-1.4.1 [ ] 24/29
Installing : pkgconf-pkg-config-1.4.1 [==== ] 24/29
Installing : pkgconf-pkg-config-1.4.1 [===== ] 24/29
Installing : pkgconf-pkg-config-1.4.1 [======================= ] 24/29
Installing : pkgconf-pkg-config-1.4.1 [======================== ] 24/29
Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 24/29
Installing : libpipeline-devel-1.5.0- [ ] 25/29
Installing : libpipeline-devel-1.5.0- [=========== ] 25/29
Installing : libpipeline-devel-1.5.0- [============ ] 25/29
Installing : libpipeline-devel-1.5.0- [================= ] 25/29
Installing : libpipeline-devel-1.5.0- [================== ] 25/29
Installing : libpipeline-devel-1.5.0- [=================== ] 25/29
Installing : libpipeline-devel-1.5.0- [==================== ] 25/29
Installing : libpipeline-devel-1.5.0- [===================== ] 25/29
Installing : libpipeline-devel-1.5.0- [====================== ] 25/29
Installing : libpipeline-devel-1.5.0- [======================= ] 25/29
Installing : libpipeline-devel-1.5.0- [======================== ] 25/29
Installing : libpipeline-devel-1.5.0-2.fc28.riscv64 25/29
Installing : zlib-devel-1.2.11-4.fc28 [ ] 26/29
Installing : zlib-devel-1.2.11-4.fc28 [== ] 26/29
Installing : zlib-devel-1.2.11-4.fc28 [======== ] 26/29
Installing : zlib-devel-1.2.11-4.fc28 [============= ] 26/29
Installing : zlib-devel-1.2.11-4.fc28 [=================== ] 26/29
Installing : zlib-devel-1.2.11-4.fc28 [==================== ] 26/29
Installing : zlib-devel-1.2.11-4.fc28 [======================= ] 26/29
Installing : zlib-devel-1.2.11-4.fc28 [======================== ] 26/29
Installing : zlib-devel-1.2.11-4.fc28.riscv64 26/29
Installing : groff-1.22.3-8.fc27.risc [ ] 27/29
Installing : groff-1.22.3-8.fc27.risc [= ] 27/29
Installing : groff-1.22.3-8.fc27.risc [== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [=== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [==== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [===== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [====== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [======= ] 27/29
Installing : groff-1.22.3-8.fc27.risc [======== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [========= ] 27/29
Installing : groff-1.22.3-8.fc27.risc [========== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [=========== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [============ ] 27/29
Installing : groff-1.22.3-8.fc27.risc [============= ] 27/29
Installing : groff-1.22.3-8.fc27.risc [============== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [=============== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [================ ] 27/29
Installing : groff-1.22.3-8.fc27.risc [================= ] 27/29
Installing : groff-1.22.3-8.fc27.risc [================== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [=================== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [==================== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [===================== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [====================== ] 27/29
Installing : groff-1.22.3-8.fc27.risc [======================= ] 27/29
Installing : groff-1.22.3-8.fc27.risc [======================== ] 27/29
Installing : groff-1.22.3-8.fc27.riscv64 27/29
Running scriptlet: groff-1.22.3-8.fc27.riscv64 27/29
Installing : gettext-0.19.8.1-14.fc28 [ ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [= ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [=== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [==== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [===== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [====== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [======= ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [======== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [========= ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [========== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [=========== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [============ ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [============= ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [============== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [=============== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [================ ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [================= ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [================== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [=================== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [==================== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [===================== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [====================== ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [======================= ] 28/29
Installing : gettext-0.19.8.1-14.fc28 [======================== ] 28/29
Installing : gettext-0.19.8.1-14.fc28.riscv64 28/29
Running scriptlet: gettext-0.19.8.1-14.fc28.riscv64 28/29
install-info: No such file or directory for /usr/share/info/gettext.info.gz
Installing : gdbm-devel-1:1.14.1-1.fc [ ] 29/29
Installing : gdbm-devel-1:1.14.1-1.fc [===== ] 29/29
Installing : gdbm-devel-1:1.14.1-1.fc [====== ] 29/29
Installing : gdbm-devel-1:1.14.1-1.fc [==================== ] 29/29
Installing : gdbm-devel-1:1.14.1-1.fc [====================== ] 29/29
Installing : gdbm-devel-1:1.14.1-1.fc [======================== ] 29/29
Installing : gdbm-devel-1:1.14.1-1.fc28.riscv64 29/29
Running scriptlet: gdbm-devel-1:1.14.1-1.fc28.riscv64 29/29
Verifying : gettext-0.19.8.1-14.fc28.riscv64 1/29
Verifying : groff-1.22.3-8.fc27.riscv64 2/29
Verifying : gettext-libs-0.19.8.1-14.fc28.riscv64 3/29
Verifying : gdbm-devel-1:1.14.1-1.fc28.riscv64 4/29
Verifying : libpipeline-devel-1.5.0-2.fc28.riscv64 5/29
Verifying : zlib-devel-1.2.11-4.fc28.riscv64 6/29
Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 7/29
Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 8/29
Verifying : pkgconf-1.4.1-1.fc27.riscv64 9/29
Verifying : libpkgconf-1.4.1-1.fc27.riscv64 10/29
Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 11/29
Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 12/29
Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 13/29
Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 14/29
Verifying : libcroco-0.6.12-4.fc28.riscv64 15/29
Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 16/29
Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 17/29
Verifying : perl-File-Path-2.15-1.fc27.noarch 18/29
Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 19/29
Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 20/29
Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 21/29
Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 22/29
Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 23/29
Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 24/29
Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 25/29
Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 26/29
Verifying : perl-threads-1:2.21-1.fc27.riscv64 27/29
Verifying : perl-threads-shared-1.58-1.fc27.riscv64 28/29
Verifying : perl-Socket-4:2.027-1.fc27.riscv64 29/29
Installed:
gdbm-devel.riscv64 1:1.14.1-1.fc28
gettext.riscv64 0.19.8.1-14.fc28
groff.riscv64 1.22.3-8.fc27
libpipeline-devel.riscv64 1.5.0-2.fc28
zlib-devel.riscv64 1.2.11-4.fc28
gettext-libs.riscv64 0.19.8.1-14.fc28
libcroco.riscv64 0.6.12-4.fc28
libpkgconf.riscv64 1.4.1-1.fc27
perl-Carp.noarch 1.42-408.fc27.0.riscv64
perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64
perl-Errno.riscv64 1.28-408.fc28.1.riscv64
perl-Exporter.noarch 5.72-408.fc27.0.riscv64
perl-File-Path.noarch 2.15-1.fc27
perl-IO.riscv64 1.38-408.fc28.1.riscv64
perl-PathTools.riscv64 3.67-408.fc27.0.riscv64
perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27
perl-Socket.riscv64 4:2.027-1.fc27
perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64
perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64
perl-constant.noarch 1.33-408.fc27.0.riscv64
perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-parent.noarch 1:0.236-408.fc27.0.riscv64
perl-threads.riscv64 1:2.21-1.fc27
perl-threads-shared.riscv64 1.58-1.fc27
pkgconf.riscv64 1.4.1-1.fc27
pkgconf-m4.noarch 1.4.1-1.fc27
pkgconf-pkg-config.riscv64 1.4.1-1.fc27
Complete!
+ dnf -y update --best
Last metadata expiration check: 0:00:02 ago on Thu Feb 22 03:22:45 2018.
Dependencies resolved.
Nothing to do.
Complete!
+ dnf -y group install buildsys-build
Last metadata expiration check: 0:00:23 ago on Thu Feb 22 03:22:45 2018.
No match for group package "gcc-c++"
No match for group package "gcc"
Dependencies resolved.
================================================================================
Group Packages
================================================================================
Marking packages as installed by the group:
@Buildsystem building group grep diffutils make
gawk unzip bash
coreutils xz gzip
sed util-linux redhat-rpm-config
cpio tar fedora-release
findutils info bzip2
shadow-utils which patch
rpm-build
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing group packages:
bzip2 riscv64 1.0.6-24.fc28 local 81 k
diffutils riscv64 3.6-3.fc28 local 577 k
make riscv64 1:4.2.1-6.fc27 local 486 k
patch riscv64 2.7.5-6.fc27 local 270 k
redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k
rpm-build riscv64 4.14.1-6.fc28.1 local 235 k
tar riscv64 2:1.29-7.fc27 local 805 k
unzip riscv64 6.0-36.fc28 local 398 k
which riscv64 2.21-4.fc28 local 65 k
xz riscv64 5.2.3-5.fc28 local 212 k
Installing dependencies:
binutils riscv64 2.30-1.fc28 local 6.9 M
dwz riscv64 0.12-5.fc28 local 108 k
elfutils riscv64 0.170-4.fc28 local 791 k
file riscv64 5.32-3.fc28 local 81 k
fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k
ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k
gnat-srpm-macros noarch 4-5.fc28 local 8.8 k
go-srpm-macros noarch 2-11.fc28 local 8.4 k
nim-srpm-macros noarch 1-1.fc28 local 7.6 k
ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k
openblas-srpm-macros noarch 2-2.fc27 local 6.6 k
perl-srpm-macros noarch 1-26.fc28 local 9.7 k
python-srpm-macros noarch 3-26.fc28 local 10 k
qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k
rust-srpm-macros noarch 5-1.fc28 local 8.0 k
zip riscv64 3.0-20.fc28 local 271 k
zstd riscv64 1.3.3-1.fc27 local 1.1 M
Transaction Summary
================================================================================
Install 27 Packages
Total download size: 12 M
Installed size: 50 M
Downloading Packages:
(1/27): tar-1.29-7.f 0% [ ] --- B/s | 0 B --:-- ETA
(1-3/27): make-4.2.1 5% [= ] 2.3 MB/s | 719 kB 00:05 ETA
(1/27): make-4.2.1-6.fc27.riscv64.rpm 830 kB/s | 486 kB 00:00
(2-3/27): tar-1.29-7 11% [== ] 2.3 MB/s | 1.4 MB 00:04 ETA
(2/27): redhat-rpm-config-96-1.fc28.0.riscv64.n 779 kB/s | 75 kB 00:00
(3-4/27): tar-1.29-7 13% [==- ] 2.3 MB/s | 1.7 MB 00:04 ETA
(3/27): diffutils-3.6-3.fc28.riscv64.rpm 665 kB/s | 577 kB 00:00
(4-5/27): tar-1.29-7 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA
(4/27): nim-srpm-macros-1-1.fc28.noarch.rpm 47 kB/s | 7.6 kB 00:00
(5-6/27): tar-1.29-7 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA
(5/27): ocaml-srpm-macros-5-2.fc27.noarch.rpm 101 kB/s | 7.8 kB 00:00
(6-7/27): openblas-s 13% [==- ] 2.2 MB/s | 1.7 MB 00:04 ETA
(6/27): openblas-srpm-macros-2-2.fc27.noarch.rp 80 kB/s | 6.6 kB 00:00
(7-8/27): qt5-srpm-m 14% [==- ] 2.2 MB/s | 1.8 MB 00:04 ETA
(7/27): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 224 kB/s | 9.0 kB 00:00
(8/27): tar-1.29-7.f 14% [==- ] 2.2 MB/s | 1.8 MB 00:04 ETA
(8/27): rust-srpm-macros-5-1.fc28.noarch.rpm 153 kB/s | 8.0 kB 00:00
(9-10/27): rpm-build 14% [==- ] 2.2 MB/s | 1.8 MB 00:04 ETA
(9/27): tar-1.29-7.fc27.riscv64.rpm 524 kB/s | 805 kB 00:01
(10-11/27): zstd-1.3 18% [===- ] 2.1 MB/s | 2.3 MB 00:04 ETA
(10/27): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 434 kB/s | 235 kB 00:00
(11-12/27): which-2. 19% [===- ] 2.1 MB/s | 2.4 MB 00:04 ETA
(11/27): which-2.21-4.fc28.riscv64.rpm 391 kB/s | 65 kB 00:00
(12-13/27): patch-2. 19% [===- ] 2.0 MB/s | 2.5 MB 00:04 ETA
(12/27): patch-2.7.5-6.fc27.riscv64.rpm 729 kB/s | 270 kB 00:00
(13-14/27): zstd-1.3 25% [===== ] 2.1 MB/s | 3.2 MB 00:04 ETA
(13/27): unzip-6.0-36.fc28.riscv64.rpm 717 kB/s | 398 kB 00:00
(14-15/27): zstd-1.3 29% [=====- ] 2.0 MB/s | 3.6 MB 00:04 ETA
(14/27): xz-5.2.3-5.fc28.riscv64.rpm 572 kB/s | 212 kB 00:00
(15-16/27): zstd-1.3 31% [====== ] 2.0 MB/s | 3.9 MB 00:04 ETA
(15/27): bzip2-1.0.6-24.fc28.riscv64.rpm 432 kB/s | 81 kB 00:00
(16-17/27): zstd-1.3 31% [====== ] 2.0 MB/s | 3.9 MB 00:04 ETA
(16/27): file-5.32-3.fc28.riscv64.rpm 558 kB/s | 81 kB 00:00
(17-18/27): zstd-1.3 33% [======- ] 2.0 MB/s | 4.2 MB 00:04 ETA
(17-19/27): binutils 38% [=======- ] 2.0 MB/s | 4.8 MB 00:03 ETA
(17/27): zstd-1.3.3-1.fc27.riscv64.rpm 545 kB/s | 1.1 MB 00:02
(18-19/27): binutils 41% [======== ] 1.9 MB/s | 5.1 MB 00:03 ETA
(18/27): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 180 kB/s | 7.5 kB 00:00
(19-20/27): binutils 41% [======== ] 1.9 MB/s | 5.2 MB 00:03 ETA
(19/27): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 191 kB/s | 8.2 kB 00:00
(20-21/27): binutils 42% [======== ] 1.9 MB/s | 5.3 MB 00:03 ETA
(20/27): gnat-srpm-macros-4-5.fc28.noarch.rpm 263 kB/s | 8.8 kB 00:00
(21-22/27): binutils 42% [========- ] 1.9 MB/s | 5.3 MB 00:03 ETA
(21/27): go-srpm-macros-2-11.fc28.noarch.rpm 312 kB/s | 8.4 kB 00:00
(22-23/27): binutils 42% [========- ] 1.9 MB/s | 5.4 MB 00:03 ETA
(22/27): perl-srpm-macros-1-26.fc28.noarch.rpm 203 kB/s | 9.7 kB 00:00
(23-24/27): binutils 43% [========- ] 1.9 MB/s | 5.4 MB 00:03 ETA
(23/27): python-srpm-macros-3-26.fc28.noarch.rp 244 kB/s | 10 kB 00:00
(24-25/27): binutils 44% [========- ] 1.9 MB/s | 5.5 MB 00:03 ETA
(24/27): dwz-0.12-5.fc28.riscv64.rpm 890 kB/s | 108 kB 00:00
(25-26/27): binutils 46% [========= ] 1.9 MB/s | 5.8 MB 00:03 ETA
(25/27): elfutils-0.170-4.fc28.riscv64.rpm 501 kB/s | 791 kB 00:01
(26-27/27): binutils 48% [=========- ] 1.8 MB/s | 6.0 MB 00:03 ETA
(26/27): zip-3.0-20.fc28.riscv64.rpm 717 kB/s | 271 kB 00:00
(27/27): binutils-2. 51% [========== ] 1.8 MB/s | 6.4 MB 00:03 ETA
(27/27): binutils-2. 57% [===========- ] 1.9 MB/s | 7.2 MB 00:02 ETA
(27/27): binutils-2. 63% [============- ] 1.9 MB/s | 7.9 MB 00:02 ETA
(27/27): binutils-2. 67% [=============- ] 1.9 MB/s | 8.5 MB 00:02 ETA
(27/27): binutils-2. 71% [============== ] 1.9 MB/s | 9.0 MB 00:01 ETA
(27/27): binutils-2. 76% [=============== ] 1.9 MB/s | 9.5 MB 00:01 ETA
(27/27): binutils-2. 79% [===============- ] 1.9 MB/s | 10 MB 00:01 ETA
(27/27): binutils-2. 83% [================- ] 1.9 MB/s | 10 MB 00:01 ETA
(27/27): binutils-2. 87% [=================- ] 1.8 MB/s | 11 MB 00:00 ETA
(27/27): binutils-2. 91% [================== ] 1.8 MB/s | 11 MB 00:00 ETA
(27/27): binutils-2. 96% [=================== ] 1.8 MB/s | 12 MB 00:00 ETA
(27/27): binutils-2. 99% [===================-] 1.8 MB/s | 12 MB 00:00 ETA
(27/27): binutils-2.30-1.fc28.riscv64.rpm 1.2 MB/s | 6.9 MB 00:05
--------------------------------------------------------------------------------
Total 1.4 MB/s | 12 MB 00:08
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [= ] 1/1
Preparing : [=== ] 1/1
Preparing : [===== ] 1/1
Preparing : [======= ] 1/1
Preparing : [========= ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============ ] 1/1
Preparing : [============== ] 1/1
Preparing : [================ ] 1/1
Preparing : [================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [====================== ] 1/1
Preparing : [======================== ] 1/1
Preparing : [========================== ] 1/1
Preparing : [============================ ] 1/1
Preparing : [============================== ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================= ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [===================================== ] 1/1
Preparing : [======================================= ] 1/1
Preparing : [========================================= ] 1/1
Preparing : [=========================================== ] 1/1
Preparing : [============================================ ] 1/1
Preparing : [============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : 1/1
Installing : file-5.32-3.fc28.riscv64 [ ] 1/27
Installing : file-5.32-3.fc28.riscv64 [====== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/27
Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/27
Installing : file-5.32-3.fc28.riscv64 1/27
Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/27
Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/27
Installing : unzip-6.0-36.fc28.riscv64 2/27
Installing : zip-3.0-20.fc28.riscv64 [ ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/27
Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/27
Installing : zip-3.0-20.fc28.riscv64 3/27
Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/27
Installing : dwz-0.12-5.fc28.riscv64 4/27
Installing : python-srpm-macros-3-26. [ ] 5/27
Installing : python-srpm-macros-3-26. [======================= ] 5/27
Installing : python-srpm-macros-3-26.fc28.noarch 5/27
Installing : perl-srpm-macros-1-26.fc [ ] 6/27
Installing : perl-srpm-macros-1-26.fc [====================== ] 6/27
Installing : perl-srpm-macros-1-26.fc28.noarch 6/27
Installing : go-srpm-macros-2-11.fc28 [ ] 7/27
Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/27
Installing : go-srpm-macros-2-11.fc28.noarch 7/27
Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/27
Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/27
Installing : gnat-srpm-macros-4-5.fc28.noarch 8/27
Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/27
Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/27
Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/27
Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/27
Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/27
Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/27
Installing : binutils-2.30-1.fc28.ris [ ] 11/27
Installing : binutils-2.30-1.fc28.ris [= ] 11/27
Installing : binutils-2.30-1.fc28.ris [== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=== ] 11/27
Installing : binutils-2.30-1.fc28.ris [==== ] 11/27
Installing : binutils-2.30-1.fc28.ris [===== ] 11/27
Installing : binutils-2.30-1.fc28.ris [====== ] 11/27
Installing : binutils-2.30-1.fc28.ris [======= ] 11/27
Installing : binutils-2.30-1.fc28.ris [======== ] 11/27
Installing : binutils-2.30-1.fc28.ris [========= ] 11/27
Installing : binutils-2.30-1.fc28.ris [========== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=========== ] 11/27
Installing : binutils-2.30-1.fc28.ris [============ ] 11/27
Installing : binutils-2.30-1.fc28.ris [============= ] 11/27
Installing : binutils-2.30-1.fc28.ris [============== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=============== ] 11/27
Installing : binutils-2.30-1.fc28.ris [================ ] 11/27
Installing : binutils-2.30-1.fc28.ris [================= ] 11/27
Installing : binutils-2.30-1.fc28.ris [================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [=================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [==================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [===================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [====================== ] 11/27
Installing : binutils-2.30-1.fc28.ris [======================= ] 11/27
Installing : binutils-2.30-1.fc28.ris [======================== ] 11/27
Installing : binutils-2.30-1.fc28.riscv64 11/27
Running scriptlet: binutils-2.30-1.fc28.riscv64 11/27
Installing : elfutils-0.170-4.fc28.ri [ ] 12/27
Installing : elfutils-0.170-4.fc28.ri [= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [==== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [===== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [====== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [========= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [========== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [============ ] 12/27
Installing : elfutils-0.170-4.fc28.ri [============= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [============== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [================ ] 12/27
Installing : elfutils-0.170-4.fc28.ri [================= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/27
Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/27
Installing : elfutils-0.170-4.fc28.riscv64 12/27
Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/27
Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/27
Installing : bzip2-1.0.6-24.fc28.riscv64 13/27
Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/27
Installing : xz-5.2.3-5.fc28.riscv64 14/27
Installing : patch-2.7.5-6.fc27.riscv [ ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/27
Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/27
Installing : patch-2.7.5-6.fc27.riscv64 15/27
Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/27
Installing : zstd-1.3.3-1.fc27.riscv64 16/27
Installing : rust-srpm-macros-5-1.fc2 [ ] 17/27
Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/27
Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/27
Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/27
Installing : rust-srpm-macros-5-1.fc28.noarch 17/27
Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/27
Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/27
Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/27
Installing : openblas-srpm-macros-2-2 [ ] 19/27
Installing : openblas-srpm-macros-2-2 [================ ] 19/27
Installing : openblas-srpm-macros-2-2.fc27.noarch 19/27
Installing : ocaml-srpm-macros-5-2.fc [ ] 20/27
Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/27
Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/27
Installing : nim-srpm-macros-1-1.fc28 [ ] 21/27
Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/27
Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/27
Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/27
Installing : nim-srpm-macros-1-1.fc28.noarch 21/27
Installing : redhat-rpm-config-96-1.f [ ] 22/27
Installing : redhat-rpm-config-96-1.f [== ] 22/27
Installing : redhat-rpm-config-96-1.f [=== ] 22/27
Installing : redhat-rpm-config-96-1.f [========= ] 22/27
Installing : redhat-rpm-config-96-1.f [=========== ] 22/27
Installing : redhat-rpm-config-96-1.f [================= ] 22/27
Installing : redhat-rpm-config-96-1.f [================== ] 22/27
Installing : redhat-rpm-config-96-1.f [=================== ] 22/27
Installing : redhat-rpm-config-96-1.f [===================== ] 22/27
Installing : redhat-rpm-config-96-1.f [====================== ] 22/27
Installing : redhat-rpm-config-96-1.f [======================== ] 22/27
Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/27
Installing : diffutils-3.6-3.fc28.ris [ ] 23/27
Installing : diffutils-3.6-3.fc28.ris [= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [==== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [===== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [====== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [========= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [========== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [============ ] 23/27
Installing : diffutils-3.6-3.fc28.ris [============= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [============== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [================ ] 23/27
Installing : diffutils-3.6-3.fc28.ris [================= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/27
Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/27
Installing : diffutils-3.6-3.fc28.riscv64 23/27
Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/27
Installing : tar-2:1.29-7.fc27.riscv6 [ ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 24/27
Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 24/27
Installing : tar-2:1.29-7.fc27.riscv64 24/27
Running scriptlet: tar-2:1.29-7.fc27.riscv64 24/27
Installing : rpm-build-4.14.1-6.fc28. [ ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [==== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [===== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [====== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [======= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [======== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [========= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=========== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [============ ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [============== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=============== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [================ ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [================= ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [=================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [==================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [===================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [====================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28. [======================== ] 25/27
Installing : rpm-build-4.14.1-6.fc28.1.riscv64 25/27
Installing : which-2.21-4.fc28.riscv6 [ ] 26/27
Installing : which-2.21-4.fc28.riscv6 [===== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [=========== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [=============== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [================ ] 26/27
Installing : which-2.21-4.fc28.riscv6 [================= ] 26/27
Installing : which-2.21-4.fc28.riscv6 [================== ] 26/27
Installing : which-2.21-4.fc28.riscv6 [======================== ] 26/27
Installing : which-2.21-4.fc28.riscv64 26/27
Running scriptlet: which-2.21-4.fc28.riscv64 26/27
Installing : make-1:4.2.1-6.fc27.risc [ ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [==== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [===== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [====== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [========= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [========== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=========== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [============ ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [============= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [============== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=============== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [================ ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [================= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [=================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [==================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [===================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [====================== ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======================= ] 27/27
Installing : make-1:4.2.1-6.fc27.risc [======================== ] 27/27
Installing : make-1:4.2.1-6.fc27.riscv64 27/27
Running scriptlet: make-1:4.2.1-6.fc27.riscv64 27/27
Verifying : tar-2:1.29-7.fc27.riscv64 1/27
Verifying : diffutils-3.6-3.fc28.riscv64 2/27
Verifying : make-1:4.2.1-6.fc27.riscv64 3/27
Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 4/27
Verifying : nim-srpm-macros-1-1.fc28.noarch 5/27
Verifying : ocaml-srpm-macros-5-2.fc27.noarch 6/27
Verifying : openblas-srpm-macros-2-2.fc27.noarch 7/27
Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 8/27
Verifying : rust-srpm-macros-5-1.fc28.noarch 9/27
Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 10/27
Verifying : zstd-1.3.3-1.fc27.riscv64 11/27
Verifying : which-2.21-4.fc28.riscv64 12/27
Verifying : patch-2.7.5-6.fc27.riscv64 13/27
Verifying : unzip-6.0-36.fc28.riscv64 14/27
Verifying : xz-5.2.3-5.fc28.riscv64 15/27
Verifying : bzip2-1.0.6-24.fc28.riscv64 16/27
Verifying : elfutils-0.170-4.fc28.riscv64 17/27
Verifying : file-5.32-3.fc28.riscv64 18/27
Verifying : binutils-2.30-1.fc28.riscv64 19/27
Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 20/27
Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 21/27
Verifying : gnat-srpm-macros-4-5.fc28.noarch 22/27
Verifying : go-srpm-macros-2-11.fc28.noarch 23/27
Verifying : perl-srpm-macros-1-26.fc28.noarch 24/27
Verifying : python-srpm-macros-3-26.fc28.noarch 25/27
Verifying : dwz-0.12-5.fc28.riscv64 26/27
Verifying : zip-3.0-20.fc28.riscv64 27/27
Installed:
bzip2.riscv64 1.0.6-24.fc28
diffutils.riscv64 3.6-3.fc28
make.riscv64 1:4.2.1-6.fc27
patch.riscv64 2.7.5-6.fc27
redhat-rpm-config.noarch 96-1.fc28.0.riscv64
rpm-build.riscv64 4.14.1-6.fc28.1
tar.riscv64 2:1.29-7.fc27
unzip.riscv64 6.0-36.fc28
which.riscv64 2.21-4.fc28
xz.riscv64 5.2.3-5.fc28
binutils.riscv64 2.30-1.fc28
dwz.riscv64 0.12-5.fc28
elfutils.riscv64 0.170-4.fc28
file.riscv64 5.32-3.fc28
fpc-srpm-macros.noarch 1.1-4.fc28
ghc-srpm-macros.noarch 1.4.2-7.fc28
gnat-srpm-macros.noarch 4-5.fc28
go-srpm-macros.noarch 2-11.fc28
nim-srpm-macros.noarch 1-1.fc28
ocaml-srpm-macros.noarch 5-2.fc27
openblas-srpm-macros.noarch 2-2.fc27
perl-srpm-macros.noarch 1-26.fc28
python-srpm-macros.noarch 3-26.fc28
qt5-srpm-macros.noarch 5.10.0-1.fc28
rust-srpm-macros.noarch 5-1.fc28
zip.riscv64 3.0-20.fc28
zstd.riscv64 1.3.3-1.fc27
Complete!
+ dnf -y install hack-gcc glibc-devel
Last metadata expiration check: 0:02:21 ago on Thu Feb 22 03:22:45 2018.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
glibc-devel riscv64 2.27-4.fc28 local 1.0 M
Installing dependencies:
glibc-headers riscv64 2.27-4.fc28 local 442 k
kernel-headers noarch 4.15.0-1.fc27 local 1.1 M
libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k
Transaction Summary
================================================================================
Install 4 Packages
Total download size: 2.5 M
Installed size: 7.1 M
Downloading Packages:
(1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA
(1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 498 kB/s | 15 kB 00:00
(2-3/4): glibc-heade 1% [ ] 546 kB/s | 46 kB 00:04 ETA
(2-4/4): glibc-heade 34% [======- ] 683 kB/s | 894 kB 00:02 ETA
(2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 773 kB/s | 442 kB 00:00
(3-4/4): glibc-devel 52% [========== ] 742 kB/s | 1.3 MB 00:01 ETA
(3-4/4): glibc-devel 86% [================= ] 872 kB/s | 2.2 MB 00:00 ETA
(3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 904 kB/s | 1.0 MB 00:01
(4/4): kernel-header 95% [=================== ] 884 kB/s | 2.4 MB 00:00 ETA
(4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 935 kB/s | 1.1 MB 00:01
--------------------------------------------------------------------------------
Total 1.8 MB/s | 2.5 MB 00:01
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [============ ] 1/1
Preparing : [========================= ] 1/1
Preparing : [====================================== ] 1/1
Preparing : 1/1
Installing : kernel-headers-4.15.0-1.f [ ] 1/4
Installing : kernel-headers-4.15.0-1.f [= ] 1/4
Installing : kernel-headers-4.15.0-1.f [== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========= ] 1/4
Installing : kernel-headers-4.15.0-1.f [========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [============ ] 1/4
Installing : kernel-headers-4.15.0-1.f [============= ] 1/4
Installing : kernel-headers-4.15.0-1.f [============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [================ ] 1/4
Installing : kernel-headers-4.15.0-1.f [================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4
Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4
Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : glibc-headers-2.27-4.fc28 [ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4
Installing : glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.riscv64 4/4
Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4
Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4
Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4
Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4
Installed:
glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28
kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28
Complete!
+ touch /rootok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ mount.static -o remount,ro /
+ poweroff
reboot: Power down
Power off