OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): INFO: recovery required on readonly filesystem
EXT4-fs (vda): write access will be enabled during recovery
EXT4-fs (vda): recovery complete
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 200K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Wed Feb 21 19:15:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link tentative
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
Welcome to the Fedora/RISC-V stage4 builder
+ set -e
+ exec
+ rm -rf /rpmbuild
+ mkdir -p /rpmbuild
+ su -c 'rpmbuild -ba /builddir/build/SPECS/libwvstreams.spec --define "debug_package %{nil}" --undefine _annotated_build --define "_missing_doc_files_terminate_build %{nil}" --define "_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d" --define "_emacs_sitelispdir /usr/share/emacs/site-lisp" --nocheck ' mockbuild
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.1GQsvc
+ umask 022
+ cd /builddir/build/BUILD
+ cd /builddir/build/BUILD
+ rm -rf wvstreams-4.6.1
+ /usr/bin/gzip -dc /builddir/build/SOURCES/wvstreams-4.6.1.tar.gz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd wvstreams-4.6.1
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ echo 'Patch #1 (wvstreams-4.2.2-multilib.patch):'
Patch #1 (wvstreams-4.2.2-multilib.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .multilib --fuzz=0
patching file include/wvautoconf.h.in
Hunk #2 succeeded at 169 (offset 3 lines).
Hunk #3 succeeded at 204 (offset 3 lines).
+ echo 'Patch #2 (wvstreams-4.5-noxplctarget.patch):'
Patch #2 (wvstreams-4.5-noxplctarget.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .xplctarget --fuzz=0
patching file install.mk
+ echo 'Patch #3 (wvstreams-4.6.1-make.patch):'
Patch #3 (wvstreams-4.6.1-make.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .make --fuzz=0
patching file Makefile
patching file wvrules.mk
+ echo 'Patch #4 (wvstreams-4.6.1-statinclude.patch):'
Patch #4 (wvstreams-4.6.1-statinclude.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .statinclude --fuzz=0
patching file include/wvunixdgsocket.h
patching file streams/wvatomicfile.cc
+ echo 'Patch #5 (wvstreams-4.6.1-gcc.patch):'
Patch #5 (wvstreams-4.6.1-gcc.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc --fuzz=0
patching file crypto/wvx509.cc
+ echo 'Patch #6 (wvstreams-4.6.1-gcc47.patch):'
Patch #6 (wvstreams-4.6.1-gcc47.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc47 --fuzz=0
patching file include/wvuid.h
+ echo 'Patch #7 (wvstreams-4.6.1-magic.patch):'
Patch #7 (wvstreams-4.6.1-magic.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .magic --fuzz=0
patching file include/wvtask.h
patching file utils/wvtask.cc
+ echo 'Patch #8 (0001-Use-explicit-cast-and-prevent-compiler-error.patch):'
Patch #8 (0001-Use-explicit-cast-and-prevent-compiler-error.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .cast --fuzz=0
patching file streams/wvstream.cc
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.mX1w2q
+ umask 022
+ cd /builddir/build/BUILD
+ cd wvstreams-4.6.1
+ export 'CXXFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fpermissive -fno-strict-aliasing -fno-tree-dce -fno-optimize-sibling-calls'
+ CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fpermissive -fno-strict-aliasing -fno-tree-dce -fno-optimize-sibling-calls'
+ export 'CFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fno-strict-aliasing'
+ CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fno-strict-aliasing'
+ touch configure
+ CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fno-strict-aliasing'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fPIC -fpermissive -fno-strict-aliasing -fno-tree-dce -fno-optimize-sibling-calls'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules'
+ export FFLAGS
+ FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules'
+ export FCFLAGS
+ LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld'
+ export LDFLAGS
+ '[' 1 = 1 ']'
+++ dirname ./configure
++ find . -name config.guess -o -name config.sub
+ for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub)
++ basename ./config.sub
+ '[' -f /usr/lib/rpm/redhat/config.sub ']'
+ /usr/bin/rm -f ./config.sub
++ basename ./config.sub
+ /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub
'/usr/lib/rpm/redhat/config.sub' -> './config.sub'
+ for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub)
++ basename ./config.guess
+ '[' -f /usr/lib/rpm/redhat/config.guess ']'
+ /usr/bin/rm -f ./config.guess
++ basename ./config.guess
+ /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess
'/usr/lib/rpm/redhat/config.guess' -> './config.guess'
+ '[' 1 = 1 ']'
+ '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']'
++ find . -name ltmain.sh
+ ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-dbus=yes --with-pam --with-openssl --without-tcl --with-qt=no --disable-optimization
configure: WARNING: unrecognized options: --disable-dependency-tracking
checking for riscv64-redhat-linux-gnu-gcc... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for riscv64-redhat-linux-gnu-g++... no
checking for riscv64-redhat-linux-gnu-c++... no
checking for riscv64-redhat-linux-gnu-gpp... no
checking for riscv64-redhat-linux-gnu-aCC... no
checking for riscv64-redhat-linux-gnu-CC... no
checking for riscv64-redhat-linux-gnu-cxx... no
checking for riscv64-redhat-linux-gnu-cc++... no
checking for riscv64-redhat-linux-gnu-cl.exe... no
checking for riscv64-redhat-linux-gnu-FCC... no
checking for riscv64-redhat-linux-gnu-KCC... no
checking for riscv64-redhat-linux-gnu-RCC... no
checking for riscv64-redhat-linux-gnu-xlC_r... no
checking for riscv64-redhat-linux-gnu-xlC... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking how to run the C++ preprocessor... g++ -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... yes
checking for riscv64-redhat-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking build system type... riscv64-redhat-linux-gnu
checking host system type... riscv64-redhat-linux-gnu
checking target system type... riscv64-redhat-linux-gnu
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking for __attribute__ ((deprecated))... yes
checking argp.h usability... yes
checking argp.h presence... yes
checking for argp.h... yes
checking for argp_parse... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for working alloca.h... yes
checking for alloca... yes
checking execinfo.h usability... yes
checking execinfo.h presence... yes
checking for execinfo.h... yes
checking argz.h usability... yes
checking argz.h presence... yes
checking for argz.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking for error_t... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for net/if.h... yes
checking for net/ethernet.h... yes
checking for netinet/if_ether.h... yes
checking whether ETHER_ADDR_LEN is declared... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netinet/in_systm.h usability... yes
checking netinet/in_systm.h presence... yes
checking for netinet/in_systm.h... yes
checking for netinet/ip.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking linux/serial.h usability... yes
checking linux/serial.h presence... yes
checking for linux/serial.h... yes
checking for cfmakeraw... yes
checking whether ln works...... yes
checking whether __libc_stack_end is public... yes
checking for pkg-config... /usr/bin/pkg-config
checking Checking that D-Bus version greater than 1.2.14 installed.... yes
checking dbus/dbus.h usability... no
checking dbus/dbus.h presence... yes
configure: WARNING: dbus/dbus.h: present but cannot be compiled
configure: WARNING: dbus/dbus.h: check for missing prerequisite headers?
configure: WARNING: dbus/dbus.h: see the Autoconf documentation
configure: WARNING: dbus/dbus.h: section "Present But Cannot Be Compiled"
configure: WARNING: dbus/dbus.h: proceeding with the preprocessor's result
configure: WARNING: dbus/dbus.h: in the future, the compiler will take precedence
configure: WARNING: ## ----------------------------------------------- ##
configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ##
configure: WARNING: ## ----------------------------------------------- ##
checking for dbus/dbus.h... yes
checking for bind in -lsocket... no
checking for openssl/ssl.h... norandom: crng init done
checking for X509_free in -lcrypto... yes
checking for SSL_has_matching_session_id in -lssl... yes
checking for POLICY_MAPPING_new in -lssl... yes
checking readline/readline.h usability... no
checking readline/readline.h presence... yes
configure: WARNING: readline/readline.h: present but cannot be compiled
configure: WARNING: readline/readline.h: check for missing prerequisite headers?
configure: WARNING: readline/readline.h: see the Autoconf documentation
configure: WARNING: readline/readline.h: section "Present But Cannot Be Compiled"
configure: WARNING: readline/readline.h: proceeding with the preprocessor's result
configure: WARNING: readline/readline.h: in the future, the compiler will take precedence
configure: WARNING: ## ----------------------------------------------- ##
configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ##
configure: WARNING: ## ----------------------------------------------- ##
checking for readline/readline.h... yes
checking for readline in -lreadline... yes
checking security/pam_appl.h usability... no
checking security/pam_appl.h presence... no
checking for security/pam_appl.h... no
checking for pam_start in -lpam... no
checking for sane PAM implementation... no
checking for valgrind... no
checking valgrind/memcheck.h usability... no
checking valgrind/memcheck.h presence... no
checking for valgrind/memcheck.h... no
checking zlib.h usability... no
checking zlib.h presence... yes
configure: WARNING: zlib.h: present but cannot be compiled
configure: WARNING: zlib.h: check for missing prerequisite headers?
configure: WARNING: zlib.h: see the Autoconf documentation
configure: WARNING: zlib.h: section "Present But Cannot Be Compiled"
configure: WARNING: zlib.h: proceeding with the preprocessor's result
configure: WARNING: zlib.h: in the future, the compiler will take precedence
configure: WARNING: ## ----------------------------------------------- ##
configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ##
configure: WARNING: ## ----------------------------------------------- ##
checking for zlib.h... yes
checking for compress in -lz... yes
checking tr1/functional usability... no
checking tr1/functional presence... yes
configure: WARNING: tr1/functional: present but cannot be compiled
configure: WARNING: tr1/functional: check for missing prerequisite headers?
configure: WARNING: tr1/functional: see the Autoconf documentation
configure: WARNING: tr1/functional: section "Present But Cannot Be Compiled"
configure: WARNING: tr1/functional: proceeding with the preprocessor's result
configure: WARNING: tr1/functional: in the future, the compiler will take precedence
configure: WARNING: ## ----------------------------------------------- ##
configure: WARNING: ## Report this to wvstreams-devel@googlegroups.com ##
configure: WARNING: ## ----------------------------------------------- ##
checking for tr1/functional... yes
checking boost/function.hpp usability... no
checking boost/function.hpp presence... no
checking for boost/function.hpp... no
checking boost/throw_exception.hpp usability... no
checking boost/throw_exception.hpp presence... no
checking for boost/throw_exception.hpp... no
configure: WARNING: PAM is missing.
configure: WARNING: Qt is missing.
configure: WARNING: Valgrind is missing.
configure: WARNING: OpenSSL is missing.
configure: error: Required dependencies missing: OpenSSL>=0.9.7
error: Bad exit status from /var/tmp/rpm-tmp.mX1w2q (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.mX1w2q (%build)
++ cleanup
++ set +e
++ sync
++ sleep 5
++ sync
++ mount.static -o remount,ro /
++ poweroff
reboot: Power down
Power off